Bend-Pak PL-7000XR User manual

BendPak, Inc. Corporate Oce
1645 Lemonwood Drive
Santa Paula, CA 93060 USA
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Customer Service Desk / Warranty
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
customerservic[email protected]
Parts Orders
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Domestic Sales & Service
USA Sales Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
International Sales & Service
Oce Tel: [phone]
Exports Dept: 1-805-933-9970 EXT. 192
Ext. Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
bpkex[email protected]om
Service Manual
SERVICE PARTS & DIAGRAMS
This guide is a troubleshooting reference used for maintaining and
servicing your Bend Pak product. It provides comprehensive information
on identifying serviceable parts and components and assists in
troubleshooting problems and performing assembly /disassembly
procedures.
BENDPAK
PL-7000XR
PRODUCT SKU
5175454
DRAWING Nº
5260185
CATEGORY
Parking Li
REV
Version R
DATE
12.09.2022

1
2
4
7
8
9
5
6
3ITEM
NO
PART NUMBER DESCRIPTION QTY REV
1 5245042 PL-7000XR LIFT SUPERSTRUCTURE 1 P
2 5250060 PL-7000XR PARTS BOX 1 H
3 5905002 PL-7000 SERIES DECK WARNING LABEL 1 --
4 5905268 PL-7000 SERIES CONTROL BOX LABEL 1 --
5 5905350 WARNING PINCH POINTS SMALL 2 --
6 5905365 PL-7000 BP VERTICAL LABEL 1 --
7 5905401 MAX CAP DANGER 7K 1 --
8 5905569 PL-7000 SERIES SAFETY PLACARD 1 --
9 5905951 2017_SERIAL_TAG-B-5905951-VERTICAL-NO BLEED 1 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
P
WAS 2489 NOW 2498, REPLACED 5905630 WITH
5905340 UPDATED BOM REVISION
01/15/2018 TS 00918
Q UPDATED BOM REVISIONS 06/14/2018 TM 00961
R
REPLACED (2) 5905340 WITH 5905350,
REMOVED (1) 5905340
07/15/2019 CA 01101
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
R
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED.
TM
DIMENSIONS ARE IN MM
TOLERANCES: MACHINE TO
0 = ±1.5
0.0 = ±0.5
0.00 = ±0.13
ANGULAR: MACHINE TO
0. = ±½
°
SURFACE FINISH 1.6 Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
5260185
PL-7000XR
PRODUCTION LIFT VER A
DO NOT SCALE DRAWING
1:35
SCALE:
THIRD ANGLE PROJECTION
-- --
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
06/02/2011

3296
2154
3130
2548
1293
1566
4391
2498 2094802
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
R
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260185
PL-7000XR
PRODUCTION LIFT VER A
1:35
SCALE:

DIMENSIONS ARE IN MM
☺
21
DETAIL A
SCALE 1 : 15
19
14 13
1
28
25
15
33
32 34
11
DETAIL C
SCALE 1 : 15
22
23
24
DETAIL D
SCALE 1 : 15
8
12
18
DETAIL E
SCALE 1 : 15
517
14 7
DETAIL G
SCALE 1 : 10
20
DETAIL H
SCALE 1 : 20
2
330
29
31
35
27
26
DETAIL F
SCALE 1 : 2
4
DETAIL J
SCALE 1 : 20
9
DETAIL B
SCALE 1 : 12
6
16
10
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E
E-001
E-002
ADDED (20) 5545535
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
03/18/2010
03/10/2011
06/01/2011
TM
TM
TM
00342
00441
00448
F
REPLACED (8)5535012 WITH 5535041,
(8)5545201,WITH5545061,(8)5530152 WITH
5530563
12/23/2014 MR 00679
G UPDATED BOM REVISION 01/31/2017 DB 00807
NEXT ASSEMBLY
5250060
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5746024 PL-7000 SERIES ADJUSTABLE CHAIN CONNECTOR 2 C
2 5530749 STS M6 x 1.0 x 10 8 -
3 5530738 HHB M10 x 1.5 x 25 8 -
4 5530153 HHB M6 x 1.0 x 5 4 -
5 5530031 HHB M6 x 1 x 12 8 -
6 5530009 HHB M12 x 1.75 x 90 CL8.8 8 -
7 5530037 HHB M6 x 1 x 90 4 -
8 5530154 HHB M20 x 2.5 x 45 8 -
9 5530116 HHB M12 x 1.75 x 40 16 -
10 5535012 NUT M12x1.75 NL 26 -
11 5535013 NUT M10 x 1.5 NL 4 -
12 5535017 NUT M20 x 2.5 NL 8 -
13 5535018 NUT M24 x 2.0 NL 2 -
14 5535357 NUT M6 x 1.0 NL 9 -
15 5545005 M6 FLAT WASHER 4 -
16 5545201 WASHER, M12 SPRING LOCK 26 -
17 5545339 WASHER 6mm x 18mm 13 -
18 5545343 WASHER, M20 FLAT 8 -
19 5545341 WASHER M10 x Ø20 FLAT 4 -
20 5550100 FTG NPL -04 JIC x -06 NPT 2 -
21 5545535 C WASHER SHIM FOR LIFTS 20 -
22 5530563 HHB M12 x 1.75 x 30 CL10.9 8 -
23 5545061 WASHER M12 x 21.1 SL CL 10.9 8 -
24 5535041 NUT M12 x 1.75 NL CL10.9 8 -
25 5530756 HHB M6 x 1 x 25 3 -
26 5530152 HHB M12 x 1.75 x 30mm 2 -
27 5545251 WASHER M10 x 18mm SL 4 -
28 5505026 1/2" PIPE STRAP Ø20.6mm 2 -
29 5550181 FTG TEE -04 JIC x -04 JIC x 04 NPT 1 -
30 5550103 FTG ELB -04 JIC -06 ORB 1 -
31 5550153 FTG ELB -04 NPT F x -04 JIC 1 -
32 5545021 WASHER M8 x Ø20 FLAT 4 -
33 5530010 HHB M8 x 1.25 x 25 4 -
34 5535001 NUT M8 x 1.25 NL 4 -
35 5530159 SHCS M6 x 1.0 x 50 2 -
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
GJZ
5174015
PARTS BAG PL-7000 SERIES
12/17/2008
DO NOT SCALE DRAWING
1:40
SCALE:
THIRD ANGLE PROJECTION
DB
2/3/2017
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.

DIMENSIONS ARE IN MM
☺
4
3
1
2ITEM
NO.
PART
NUMBER
DESCRIPTION QTY. REV
1 5600081 PL-7000 SERIES ROLLER HOUSING WELDMENT 1 C
2 5600082 PL-7000XR/XPR-9S CHAIN ROLLER PIN WELDMENT 1 G
3 5215073 PL-7000XR/XPR-9 CHAIN ROLLER ASSEMBLY 1 H
4 5540006 SNAP RING TRUARC 5103-100 1 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
F UPDATED BOM REVISIONS 02/14/2012 TM 00490
G
G-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLIES
06/25/2013
06/07/2017
TM
TM
00605
00831
H UPDATED BOM REVISIONS 03/08/2018 CA 00929
NEXT ASSEMBLY
5215211
5215212
5215726
5215727
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
H
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215082
PL-7000 SERIES ROLLER
ASSEMBLY
02/28/2008
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
CA
3/13/2018
ASSEMBLE ITEMS AS SHOWN 1.

1
4
2
5
8
9
3
6
11
10
7
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600228 PL-7000XR OFFSIDE POST WELDMENT 1 G
2 5215082 PL-7000 SERIES ROLLER ASSEMBLY 1 H
3 5215325 PL-7000 SERIES LIFT HEAD ASSEMBLY - LH 1 M
4 5600111 ROLLER COVER WELDMENT 1 A
5 5700040 CYLINDER TIE STRAP 1 A
6 5736049 PL-7000 SERIES LIFT HEAD CONNECTOR 1 B
7 5761003 PL-7000, XPR-9S CHAIN CONNECTOR 1 H
8 5502325 CYLINDER ASSEMBLY Ø2.5 x 43 1 E
9 5530034 SHCS M10 x 1.5 x 50 GR8/CL10.9 2 -
10 5530039 SHCS M10 x 1.5 x 60 GR8/CL10.9 2 -
11 5535013 NUT M10 x 1.5 NL 4 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
T UPDATED BOM REVISION 01/15/2018 TS 00918
U UPDATED BOM REVISIONS 03/09/2018 CA 00929
V UPDATED BOM REVISION 06/14/2018 TM 00961
NEXT ASSEMBLY
5245042
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
V
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED.
GJZ
DIMENSIONS ARE IN MM
TOLERANCES: MACHINE TO
0 = ±1.5
0.0 = ±0.5
0.00 = ±0.13
ANGULAR: MACHINE TO
0. = ±½
°
SURFACE FINISH 1.6 Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
5215211
PL-7000XR OFFSIDE
POST ASSEMBLY
DO NOT SCALE DRAWING
1:18
SCALE:
THIRD ANGLE PROJECTION
CA 6/22/2018
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
12/12/2008

A
1
3
11
7
2
8
14
9
17
15
10
12
DETAIL A
SCALE 1 : 3
13
16
18
5
4
6
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5600229 PL-7000XR CONTROL POST WELDMENT 1 H
2 5215082 PL-7000 SERIES ROLLER ASSEMBLY 1 H
3 5215324 PL-7000 SERIES LIFT HEAD ASSEMBLY - RH 1 N
4 5505035 PL-7000 SERIES SAFETY CLEVIS PIN 1 B
5 5540001 2.5 WIRE DIA., Ø25.5x150 LG. 1 C
6 5620268 PL-7000 SAFETY LATCH WELDMENT 1 B
7 5600111 ROLLER COVER WELDMENT 1 A
8 5700040 CYLINDER TIE STRAP 1 A
9 5736049 PL-7000 SERIES LIFT HEAD CONNECTOR 1 B
10 5761003 PL-7000, XPR-9S CHAIN CONNECTOR 1 H
11 5502325 CYLINDER ASSEMBLY Ø2.5 x 43 1 E
12 5505026 1/2" PIPE STRAP Ø20.6mm 4 -
13 5505350 MODEL#211 HAIR PIN/ LARGE 1 -
14 5530034 SHCS M10 x 1.5 x 50 GR8/CL10.9 2 -
15 5530039 SHCS M10 x 1.5 x 60 GR8/CL10.9 2 -
16 5530756 HHB M6 x 1 x 25 1 -
17 5535013 NUT M10 x 1.5 NL 4 -
18 5535357 NUT M6 x 1.0 NL 1 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
V UPDATED BOM REVISION 01/15/2018 TS 00918
W UPDATED BOM REVISIONS 03/09/2018 CA 00929
X UPDATED BOM REVISION 06/14/2018 TM 00961
NEXT ASSEMBLY
5245042
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
X
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED.
GJZ
DIMENSIONS ARE IN MM
TOLERANCES: MACHINE TO
0 = ±1.5
0.0 = ±0.5
0.00 = ±0.13
ANGULAR: MACHINE TO
0. = ±½
°
SURFACE FINISH 1.6 Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
5215212
PL-7000XR CONTROL
POST ASSEMBLY
DO NOT SCALE DRAWING
1:18
SCALE:
THIRD ANGLE PROJECTION
CA 6/22/2018
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
12/15/2008

DIMENSIONS ARE IN MM
☺
5
4
1
10
87
9
2
3
11
6
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
L
L-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLY
04/14/2017
06/07/2017
TS
TM
00819
00831
M UPDATED BOM REVISION 03/07/2018 CA 00929
N UPDATED BOM REVISION 06/14/2018 TM 00961
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600225 PL-7000 LIFT HEAD WELDMENT - RH 1 D
2 5215074 PL-7000 SERIES EQUALIZER ROLLER ASSEMBLY 1 C
3 5505682 PL-7000 SERIES CLEVIS PIN 1 B
4 5715005
PL-7000 SERIES POLYETHYLENE COVER BLOCK
95x95
1 D
5 5716001 PL-6000/7000, GP/XPR SERIES GUIDE BLOCK 8 F
6 5736051 PL-7000 SERIES SAFETY STOP BLOCK 1 B
7 5761003 PL-7000, XPR-9S CHAIN CONNECTOR 1 H
8 5505350 MODEL#211 HAIR PIN/ LARGE 1 -
9 5530039 SHCS M10 x 1.5 x 60 GR8/CL10.9 2 -
10 5535013 NUT M10 x 1.5 NL 2 -
11 5530033 SHCS M12 x 1.25 x 25mm NL 2 -
NEXT ASSEMBLY
5215212
5215726
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
N
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
GJZ
5215324
PL-7000 SERIES LIFT
HEAD ASSEMBLY - RH
12/08/2008
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
CA 6/22/2018
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
5
1
8
6
9
3
27
4
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
K
K-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLY
04/14/2017
06/07/2017
TS
TM
00819
00831
L UPDATED BOM REVISION 03/07/2018 CA 00929
M UPDATED BOM REVISION 06/14/2018 TM 00961
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600226 PL-7000 LIFT HEAD WELDMENT - LH 1 C
2 5215074 PL-7000 SERIES EQUALIZER ROLLER ASSEMBLY 1 C
3 5505682 PL-7000 SERIES CLEVIS PIN 1 B
4 5715005
PL-7000 SERIES POLYETHYLENE COVER BLOCK
95x95
1 D
5 5716001 PL-6000/7000, GP/XPR SERIES GUIDE BLOCK 8 F
6 5761003 PL-7000, XPR-9S CHAIN CONNECTOR 1 H
7 5505350 MODEL#211 HAIR PIN/ LARGE 1 -
8 5530039 SHCS M10 x 1.5 x 60 GR8/CL10.9 2 -
9 5535013 NUT M10 x 1.5 NL 2 -
NEXT ASSEMBLY
5215211
5215727
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
M
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
GJZ
5215325
PL-7000 SERIES LIFT
HEAD ASSEMBLY - LH
12/08/2008
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
CA 6/22/2018
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
A
1
3
2
DETAIL A
SCALE 1 : 2
6
5
4
8
7
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5620479 PL-7000 CONTROL ARM WELDMENT 1 A
2 5746110 PL-7000 SAFETY CONTROL HANDLE 1 A
3 5715014 Ø32mm PLASTIC BALL-M12x1.75 1 A
4 5575112 GP/PCL/XPR/PL-7000 SAFETY SHEAVE 1 C
5 5746109 PL-7000 SAFETY CONTROL SPACER 2 A
6 5565350 GP/PCL/XPR/PL-7000 SAFETY SHEAVE SPACER 1 C
7 5530097 HHB M6 x 1.0 x 50 2 -
8 5535357 NUT M6 x 1.0 NL 2 -
NEXT ASSEMBLY
5245042
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215210 03/10/2011 TM 00441
B
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED NEXT ASSEMBLY
06/01/2011 TM 00448
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
SIZE:
MATERIAL:
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215517
PL-7000 SERIES CONTROL
ARM ASSEMBLY
---
---
03/10/2011
DO NOT SCALE DRAWING
1:10
SCALE:
THIRD ANGLE PROJECTION
MT
06/15/2011
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

1
6
2
7
3
4
5ITEM
NO.
PART NUMBER DESCRIPTION QTY REV
1 5600634 PL-7000XR EQUALIZER CHAIN TUBE WELDMENT 1 A
2 5600016 PL-7000 SERIES TIRE STOP BAR WELDMENT 2 D
3 5600403 PL-7000 SERIES DRIVE UP RAMP WELDMENT-RH 1 C
4 5600402 PL-7000 SERIES DRIVE UP RAMP WELDMENT- LH 1 C
5 5600633 PL-7000XR DRIVE-ON AND TIRE STOP TUBE WELDMENT 1 B
6 5730002 PL-7000 SERIES TIRE STOP PLATE 2 D
7 5766175 PL-7000 SERIES DRIVE-ON AND TIRE STOP TUBE 1 B
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215187 05/31/2011 TM 00448
B UPDATED BOM REVISION 03/31/2017 DB 00820
NEXT ASSEMBLY
5245042
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED.
TM
DIMENSIONS ARE IN MM
TOLERANCES: MACHINE TO
0 = ±1.5
0.0 = ±0.5
0.00 = ±0.13
ANGULAR: MACHINE TO
0. = ±½
°
SURFACE FINISH 1.6 Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
5215524
PL-7000XR DRIVE UP
RAMP ASSEMBLY
DO NOT SCALE DRAWING
1:25
SCALE:
THIRD ANGLE PROJECTION
DB 4/26/2017
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
05/31/2011

9
3
7
1
11
13
6
4
2
12
10
5
8
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY REV
1 5600635 PL-7000 SERIES FLOOR CROSSTUBE WELDMENT 1 B
2 5215524 PL-7000XR DRIVE UP RAMP ASSEMBLY 1 B
3 5215211 PL-7000XR OFFSIDE POST ASSEMBLY 1 V
4 5215212 PL-7000XR CONTROL POST ASSEMBLY 1 X
5 5215517 PL-7000 SERIES CONTROL ARM ASSEMBLY 1 B
6 5620250
PL-7000 SERIES POWER SIDE POST BASE EXTENSION
WELDMENT
1 C
7 5620251 PL-7000 SERIES OFF SIDE TUBE EXTENSION WELDMENT 1 C
8 5620254 PL-7000 TAPERED FOOT WELDMENT 2 A
9 5620266 PL-7000 SERIES POST TOP PLATE WELDMENT 2 C
10 5600632 PL-7000XR REAR DECK WELDMENT 1 A
11 5600631 PL-7000XR FRONT DECK WELDMENT 1 A
12 5600630 PL-7000XR CENTER DECK WELDMENT 1 A
13 5701083 PL-7000 SERIES TUBE EXTENSION COVER-LH 2 C
NEXT ASSEMBLY
5260185
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
M UPDATED BOM REVISIONS 01/15/2018 TS 00918
N UPDATED BOM REVISIONS 03/09/2018 CA 00929
P UPDATED BOM REVISIONS 06/14/2018 TM 00961
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
P
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED.
TM
DIMENSIONS ARE IN MM
TOLERANCES: MACHINE TO
0 = ±1.5
0.0 = ±0.5
0.00 = ±0.13
ANGULAR: MACHINE TO
0. = ±½
°
SURFACE FINISH 1.6 Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
5245042
PL-7000XR LIFT
SUPERSTRUCTURE
DO NOT SCALE DRAWING
1:50
SCALE:
THIRD ANGLE PROJECTION
CA 6/22/2018
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
05/31/2011

DIMENSIONS ARE IN MM
☺
1
5
6
7
4
3
2
8
10
9
12
11
13
NEXT ASSEMBLY
5260185
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5174015 PARTS BAG PL-7000 SERIES 1 G
2 5715003 POWER UNIT VIBRATION DAMPENER 1 B
3 5510101 PL-7000XR LIFT HEAD CHAIN 2 B
4 5510115 PL-7000XR EQUALIZER CHAIN 2 A
5 5570183 PL-7000XR HOSE ASSEMBLY Ø6.4 x 6315mm SB 1 B
6 5570182 PL-7000XR HOSE ASSEMBLY Ø6.4 x 2480mm SB 2 B
7 5595384
PL-7000XR SAFETY CONTROL CABLE ASSEMBLY Ø2.4 x
2650mm
1 B
8 5530456 AB 3/4" x 4 - 3/4" 8 -
9 5900159 PL-7000XR INSTALLATION MANUAL 1 -
10 5900152 ALIGN OIM OPERATION INSPECTION & MAINTENANCE 1 -
11 5900147 SAFETY MANUAL ALI / SM 93-1 1 -
12 5905151 SAFETY TIPS CARD ALI-ST 90 1 -
13 5715360 POLYETHYLENE TUBE COVER 2.00 x 3.00in 3 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
F UPDATED BOM REVISIONS 02/01/2017 DB 00807
G ADDED 5715360, REMOVED 5905925 & 5905630 06/09/2017 TM 00831
H UPDATED BOM REVISION 06/14/2018 TM 00961
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
H
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5250060
PL-7000XR PARTS BOX
05/31/2011
DO NOT SCALE DRAWING
1:20
SCALE:
THIRD ANGLE PROJECTION
CA 6/22/2018
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.

PART SPECIFICATION FORM
ACP
BENDPAK Number:
5570129
MRP Description:
¼” HYDRAULIC HOSE 31 CL-0400X
Date:
05/24/2018
ECO :
00950
1. Engineering Specification
Application:
¼” HYDRAULIC HOSE
Detailed Description:
ONE or TWO BRAID STEEL WIRE HYDRAULIC HOSE
SIZE: 1/4” / 6mm I.D. MIN
0.53” / 13.4mm O.D. MAX
SPECS: 5700PSI OR 393 BAR WORKING PRESSURE MINIMUM
17100PSI OR 1179 BAR MINIMUM BURST PRESSURE MINIMUM
3” / 80mm MIN BEND RADIUS
COLOR: BLACK
ADDITIONAL CONTACT INFORMATION:
Xin Yurong
Shandong Ningjin High Energy Hose Co., Ltd.
Tel: [phone]
No. 7, Taishan Rd., Industrial Park, Ningjin County, Shandong, China
Approved Vendor
Vendor Part #
Contact #
AUTHORIZED
COMPONENT PROVIDER
1) Ningjin Hydraulic Hose
Co.
5570129
[phone]
X
2)
OR BENDPAK ENGINEERING APPROVED EQUIVALENT
2. Vendor Information (Or for Reference)

2480
312
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5570129 Ø6.4 ID HYDRAULIC HOSE 2426mm* -
2 5550325 FTG NPL Ø1/4 CRIMP x -04 JIC 1 -
3 5550345 FTG ELB Ø1/4 CRIMP x -04 JIC 1 -
NEXT ASSEMBLY
5250060
5250372
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5570907 05/31/2011 TM 00448
B
B-001
REPLACED 5570110 WITH 5570129
UPDATED NEXT ASSEMBLY
12/23/2014
06/07/2017
TM
TM
00679
00831
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5570182
PL-7000XR HOSE ASSEMBLY
Ø6.4 x 2480mm SB
05/31/2011
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
TM 6/22/2017
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±1.0
0.00 = ±0.25
0.000 = ±0.13
ANGULAR: MACH 2
°
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED.
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
(*)ITEM 1 QTY FOR REFERENCE ONLY 2.

6315
312
ITEM NO PART NUMBER DESCRIPTION QTY. REV
1 5570129 Ø6.4 ID HYDRAULIC HOSE 6261mm* -
2 5550325 FTG NPL Ø1/4 CRIMP x -04 JIC 1 -
3 5550345 FTG ELB Ø1/4 CRIMP x -04 JIC 1 -
NEXT ASSEMBLY
5250060
5250372
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5570906 05/31/2011 TM 00448
B
B-001
REPLACED 5570110 WITH 5570129
UPDATED NEXT ASSEMBLY
12/23/2014
06/06/2017
TM
TM
00679
00831
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5570183
PL-7000XR HOSE ASSEMBLY
Ø6.4 x 6315mm SB
05/31/2011
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
TM 6/22/2017
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±1.0
0.00 = ±0.25
0.000 = ±0.13
ANGULAR: MACH 2
°
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED.
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
(*)ITEM 1 QTY FOR REFERENCE ONLY 2.

2650
2 1
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5595362 CABLE Ø2.38mm 7x7 1 A
2 5505036 3/32" STAKE EYE 2 A
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5595064 03/10/2011 TM 00441
B
B-001
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLY
06/01/2011
06/07/2017
TM
TM
00448
00831
NEXT ASSEMBLY
5250060
5250372
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5595384
PL-7000XR SAFETY
CONTROL CABLE
ASSEMBLY Ø2.4 x 2650mm
03/10/2011
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
TM 6/22/2017
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
ANGULAR: 0. =
2
°
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
LENGTH SHOWN IS AFTER CRIMPING 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.

1
2
3
ITEM NO. PART NUMBER DESCRIPTION QTY REV
1 5620260 PL-7000 SERIES LIFT HEAD TUBE WELDMENT - RH 1 D
2 5731037 PL-7000 LIFT HEAD FACE PLATE 1 A
3 5736233 PL-7000 LIFT HEAD CHAIN CONNECTOR PLATE 2 C
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B UPDATED BOM REVISIONS 09/10/2009 AC 00300
C UPDATED BOM REVISION 11/12/2009 AC 00318
D
D-001
D-002
UPDATED BOM REVISION
CLARIFIED 5731037 WELD pg2
UPDATED PAINT WAS BLUE NOW GREY
04/30/2010
01/30/2013
06/11/2018
AC
TM
TS
00350
00577
00956
NEXT ASSEMBLY
5215324
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED.
GJZ
5600225
PL-7000 LIFT HEAD
WELDMENT - RH
12/04/2008
DO NOT SCALE DRAWING
1:6.5
SCALE:
THIRD ANGLE PROJECTION
MM 01/30/2013
BREAK AND DEBURR ALL SHARP EDGES 0.3mm 1.
REMOVE ALL WELD SPLATTER 2.
DIMENSIONS SHOWN ARE AFTER PAINTING 3.
PAINT BENDPAK GREY (RAL-7024) 4.
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
ANGULAR: 0. =
2
°
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED

1
2
3
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5620261 PL-7000 SERIES LIFT HEAD TUBE WELDMENT-LH 1 C
2 5731037 PL-7000 LIFT HEAD FACE PLATE 1 A
3 5736233 PL-7000 LIFT HEAD CHAIN CONNECTOR PLATE 2 C
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE 12/08/2008 GJZ 00255
B UPDATED BOM REVISIONS 09/10/2009 AC 00300
C
C-001
C-002
UPDATED BOM REVISION
CLARIFIED 5731037 WELD pg2
UPDATED COLOR WAS BLUE NOW GREY
04/30/2010
01/30/2013
06/12/2018
AC
TM
TS
00350
00577
00956
NEXT ASSEMBLY
5215325
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED.
GJZ
5600226
PL-7000 LIFT HEAD
WELDMENT - LH
12/08/2008
DO NOT SCALE DRAWING
1:6.5
SCALE:
THIRD ANGLE PROJECTION
MM 01/30/2013
BREAK AND DEBURR ALL SHARP EDGES 0.3mm 1.
REMOVE ALL WELD SPLATTER 2.
DIMENSIONS SHOWN ARE AFTER PAINTING 3.
PAINT BENDPAK GREY (RAL-7024) 4.
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
ANGULAR: 0. =
2
°
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED

4
5
2
3
1
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5620262 PL-7000 POST BASE PLATE WELDMENT 1 B
2 5620252 PL-7000 POST BASE TUBE WELDMENT #2 1 A
3 5620888 PL-7000 SERIES POST BASE TUBE WELDMENT #3 1 B
4 5701085 PL-7000XR OFF SIDE POST 1 B
5 5736036 PL-7000 SERIES TIE STRAP BLOCK 2 B
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E
REPLACED 5620253 WITH 5620888, PAINT
WAS BLUE NOW GRAY
06/09/2017 TM 00831
F UPDATED BOM REVISION 08/18/2017 TS 00869
G WAS 37 NOW 35, WAS 10 NOW 15 01/15/2018 TS 00918
NEXT ASSEMBLY
5215211
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED.
GJZ
5600228
PL-7000XR OFFSIDE POST
WELDMENT
12/12/2008
DO NOT SCALE DRAWING
1:18
SCALE:
THIRD ANGLE PROJECTION
AW 1/29/2018
BREAK AND DEBURR ALL SHARP EDGES 0.3mm 1.
REMOVE ALL WELD SPLATTER 2.
DIMENSIONS SHOWN ARE AFTER PAINTING 3.
PAINT BENDPAK GRAY (RAL-7024) 4.
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
ANGULAR: 0. =
2
°
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED