Bend-Pak XPR-9S-LP User manual

BendPak, Inc. Corporate Oce
1645 Lemonwood Drive
Santa Paula, CA 93060 USA
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Customer Service Desk / Warranty
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
customerservic[email protected]
Parts Orders
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Domestic Sales & Service
USA Sales Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
International Sales & Service
Oce Tel: [phone]
Exports Dept: 1-805-933-9970 EXT. 192
Ext. Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
bpkex[email protected]om
Service Manual
SERVICE PARTS & DIAGRAMS
This guide is a troubleshooting reference used for maintaining and
servicing your Bend Pak product. It provides comprehensive information
on identifying serviceable parts and components and assists in
troubleshooting problems and performing assembly /disassembly
procedures.
BENDPAK
XPR-9S-LP
PRODUCT SKU
5175391
DRAWING Nº
5260557
CATEGORY
Two Post Li
REV
Version Y
DATE
08.20.2021

DIMENSIONS ARE IN MM
☺
3
4
2
1
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5245225 XPR-9 LIFT SUPERSTRUCTURE 1 W
2 5250037 XPR-9S PARTS BOX 1 Q
3 5215274 XPR-9S/10S-LP MEDIUM ARM ASSEMBLY 4 L
4 5215226 XPR-9/9D TOP EQUALIZER PULLEY PLATE ASSEMBLY 2 K
- 5905131 2 POST DECAL KIT, LESS ALI 1 E
- 5905109 WARNING ALI/WL 101 1 --
- 5905402 MAX CAPACITY 9K DANGER LABEL, ENGLISH-FRENCH 1 --
- 5905465 MANUFACTURER LABEL 1 --
- 5905650 MAX CAPACITY NTRL 9K LABEL, ENGLISH-FRENCH 1 --
- 5905940 PRODUCT DATA LABEL 1 --
- 5905950 SERIAL TAG A 1 --
- 5905285 SERIALTAG EXTERIOR PEEL OFF INVENTORY LABEL 1 --
- 5905377 NOTICE LABEL, ALI/WLSIA01 1 --
- 5905414 GP/XPR LOCK-RELEASE LABEL 1 --
- 5906044 AMERICAN OWNED LABEL 1 --
- 5905775 CALIFORNIA PROP. 65 LABEL 1 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
W UPDATED BOM REVISION 11/03/2020 TM 01226
X ADDED 5906044, UPDATED BOM REVISION 06/24/2021 CA 01310
Y ADDED 5905775 08/09/2021 TM 01321
SHEET 1 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
Y
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
JM
5260557
XPR-9S-LP PRODUCTION
LIFT VER E
12/15/2015
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
OR 08/12/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
SEE COLORS & GRAPHICS FOR LABEL PLACEMENT 3.

112.362in
2854.0mm
[5.055-79.055in]
128.4-2008mm
[9.697-83.697in]
246.3-2125.9mm
WITH 63mm [2.5in] ADAPTER
AND MAX ADJUSTMENT
[126.3-139.724in]
3208.0-3549.0mm
[92.678-106.102in]
2354.0-2695.0mm
DRIVE THRU
[132.00-145.00in]
3353.0-3683.0mm
[27.957-47.00in]
710.1mm-1194mm
SHEET 2 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
Y
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260557
XPR-9S-LP PRODUCTION
LIFT VER E
1:35
SCALE:

DIMENSIONS ARE IN MM
☺
1
3
4
2
5
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
NEXT ASSEMBLY
5260553
5260557
5260558
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5215391 XPR-9 OFF SIDE POST ASSEMBLY 1 W
2 5215392 XPR-9 POWER SIDE POST ASSEMBLY 1 W
3 5210018 XPR-9 GROUND PLATE 1 D
4 5600510 XPR-9 FLOORPLATE EXTENSION WELDMENT 1 A
5 5530079 BPHS M6 x1.0x10 2 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
U UPDATED BOM REVISIONS 05/20/2019 TS 01086
V UPDATED BOM REVISIONS 02/03/2020 TM 01107
W UPDATED BOM REVISIONS 11/03/2020 TM 01226
WHERE USED
XPR-9S
XPR-9S-LP
XPR-9TS
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
W
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5245225
XPR-9 LIFT
SUPERSTRUCTURE
08/31/2010
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
OR
11/05/2020
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
A
11
10
3
4
2
1
17
15
16
9
13
12
14
18
DETAIL A
SCALE 1 : 2
6
5
8
7
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
NEXT ASSEMBLY
5245225
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5600368 XPR-9 OFF SIDE POST WELDMENT 1 M
2 5535013 NUT M10 x 1.5 NL 2 -
3 5530761 SHCS M10 x 1.5 x 55 2 -
4 5761003 PL-7000, XPR-9S CHAIN CONNECTOR 1 H
5 5565350 D2/GP/PCL/XPR/PL-7000 SAFETY SHEAVE SPACER 2 C
6 5535357 NUT M6 x 1.0 NL 2 -
7 5530756 HHB M6 x 1 x 25 2 -
8 5575112 D2/GP/PCL/0XPR/PL-7000 SAFETY SHEAVE 2 C
9 5215386 XPR-9S LIFT HEAD ASSEMBLY 1 M
10 5502321 CYLINDER ASSEMBLY Ø2.5 x 37 - Ø1.75 ROD 1 G
11 5210117 XPR-9S CHAIN ROLLER ASSEMBLY 1 G
12 5575111 XPR-9S/10 SHEAVE ASSEMBLY 2 G
13 5505350 MODEL#211 HAIR PIN/ LARGE 2 -
14 5550041 FTG ELB -06 NPT x -06 NPT 1 -
15 5550108 XPR-9S 3/8" NPT TUBE FITTING 1 E
16 5550106 FTG ELB -04JIC x 3/8” NPT 1 -
17 5210943 XPR-9S CYLINDER LEVELING PLUG 1 F
18 5210116 XPR-9S CYLINDER CHAIN 2800mm 1 E
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
U UPDATED BOM REVISION 05/21/2109 TS 01086
V UPDATED BOM REVISION 02/03/2020 TM 01107
W UPDATED BOM REVISION 11/03/2020 TM 01226
WHERE USED
XPR-9 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
W
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215391
XPR-9 OFF SIDE POST
ASSEMBLY
08/30/2010
DO NOT SCALE DRAWING
1:18
SCALE:
THIRD ANGLE PROJECTION
OR 11/04/2020
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
CHAIN SHOWN IN REPRESENTATIONAL FORM ONLY 3.

DIMENSIONS ARE IN MM
☺
A
12
11
3
2
4
1
17
14
15
9
13
10
16
18
DETAIL A
SCALE 1 : 2
7
8 6
5
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600369 XPR-9 POWER SIDE POST WELDMENT 1 M
2 5761003 PL-7000, XPR-9S CHAIN CONNECTOR 1 H
3 5530761 SHCS M10 x 1.5 x 55 2 -
4 5535013 NUT M10 x 1.5 NL 2 -
5 5565350
D2/GP/PCL/XPR/PL-7000 SAFETY SHEAVE
SPACER
2 C
6 5530756 HHB M6 x 1 x 25 2 -
7 5535357 NUT M6 x 1.0 NL 2 -
8 5575112 D2/GP/PCL/0XPR/PL-7000 SAFETY SHEAVE 2 C
9 5215386 XPR-9S LIFT HEAD ASSEMBLY 1 M
10 5575111 XPR-9S/10 SHEAVE ASSEMBLY 2 G
11 5502321 CYLINDER ASSEMBLY Ø2.5 x 37 - Ø1.75 ROD 1 G
12 5210117 XPR-9S CHAIN ROLLER ASSEMBLY 1 G
13 5505350 MODEL#211 HAIR PIN/ LARGE 2 -
14 5550108 XPR-9S 3/8" NPT TUBE FITTING 1 E
15 5550106 FTG ELB -04JIC x 3/8” NPT 1 -
16 5550041 FTG ELB -06 NPT x -06 NPT 1 -
17 5210943 XPR-9S CYLINDER LEVELING PLUG 1 F
18 5210116 XPR-9S CYLINDER CHAIN 2800mm 1 E
NEXT ASSEMBLY
5245225
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
U UPDATED BOM REVISION 05/20/2019 TS 01086
V UPDATED BOM REVISION 02/03/2020 TM 01107
W UPDATED BOM REVISION 11/03/2020 TM 01226
WHERE USED
XPR-9S SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
W
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5215392
XPR-9 POWER SIDE
POST ASSEMBLY
08/30/2010
DO NOT SCALE DRAWING
1:18
SCALE:
THIRD ANGLE PROJECTION
OR 11/05/2020
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
CHAIN SHOWN IN REPRESENTATIONAL FORM ONLY 3.
NOTE: UNLESS OTHERWISE SPECIFIED .

DIMENSIONS ARE IN MM
☺
100
8
1
10
9
11
5
3
2
4
7
6
12
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600508 XPR-9 LIFT HEAD WELDMENT 1 J
2 5540133 GP-7, D2-8/10, XPR-9/10 LIFT HEAD SPRING 2 D
3 5746098 GP, D2-8/10, XPR-9/10 Ø25mm GEAR SHAFT 2 F
4 5701052 D2/GP/M6K/XPR ARM INTERNAL GEAR STOP 2 F
5 5580219 KEYRING 56mm x 3mm 2 -
6 5540006 SNAP RING TRUARC 5103-100 2 -
7 5505106 SPRING PIN M6 x 50 2 A
8 5716001 2 POST GUIDE BLOCK 8 G
9 5761003 D2-8F, PL-7000, XPR-9S CHAIN CONNECTOR 1 H
10 5530761 SHCS M10 x 1.5 x 55 2 -
11 5535013 NUT M10 x 1.5 NL 2 -
12 5930183 D2-8/10,XPR-9/10 LIFT HEAD GUSSET COVER 1 E
NEXT ASSEMBLY
5215391
5215392
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
K
UPDATED TITLE TO REFLECT WHERE USED
UPDATED BOM REVISIONS
11/03/2016 HG 00738
L UPDATED BOM REVISIONS 04/17/2017 TS 00819
M UPDATED BOM REVISIONS 03/06/2018 CA 00929
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
M
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215386
XPR-9S LIFT
HEAD ASSEMBLY
08/30/2010
DO NOT SCALE DRAWING
1:10
SCALE:
THIRD ANGLE PROJECTION
CA 03/13/2018
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
1
2
3
4
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600987 XPR-10S-LP MEDIUM ARM WELDMENT 1 L
2 5545341 WASHER M10 x Ø20 FLAT 3 -
3 5545200 WASHER M10 x Ø18 SL 3 -
4 5530302 HHB M10 x 1.5 x 40 FULLY THREAD 3 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
J UPDATED BOM REVISION 03/08/2018 TM 00930
K UPDATED BOM REVISION 05/29/2018 TM 00953
L UPDATED BOM REVISION AND NEXT ASSEMBLIES 02/20/2020 TM 01107
NEXT ASSEMBLY
5260240
5260243
5260246
5260557
5260566
WHERE USED
XPR-9S-LP
XPR-10XLS-LP
XPR-10XLS-181-LP
XPR-10S-LP
XPR-10S-168-LP
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
L
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
JM
5215274
XPR-9S/10S-LP MEDIUM
ARM ASSEMBLY
06/23/2015
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
OR 04/15/2020
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
NEXT ASSEMBLY
5260553
5260557
5260558
5260611
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY REV
1 5174215 XPR-9 PARTS BAG 1 L
2 5215704 ROUND ADJUSTABLE LIFT PAD ASSEMBLY 4 H
3 5701214 XPR-9 SAFETY CLOSEOUT COVER 2 G
4 5570104 XPR-9 HYDRAULIC HOSE ASSY Ø6.35 x 2985mm DS 1 E
5 5570103 D2-8F, XPR-9 HYDRAULIC HOSE ASSY Ø6.35 x 1359mm DS 2 E
6 5570176 HYDRAULIC HOSE ASSEMBLY Ø6.35 x 330mm DS 1 F
7 5550095 FTG NPL -04 JIC x -04 JIC 1 -
8 5595359 CABLE ASSEMBLY Ø10 x 9507mm DBST 2 D
9 5595161 XPR-9 Ø2.4mm x 6400 SAFETY CABLE 1 E
10 5505116 D2-8F, XPR-9/10 LIFT HEAD PIN WELDMENT 4 D
11 5540281 C RING Ø38mm OD 5103-150 4 -
12 5715003 POWER UNIT VIBRATION DAMPENER 1 B
13 5731121 XPR-9 SAFETY LINKAGE BAR 2 G
14 5600370 XPR-9 SAFETY WELDMENT #1 1 K
15 5600372 XPR-9 SAFETY WELDMENT #3 2 G
16 5600371 XPR-9 SAFETY WELDMENT #2 1 H
17 5736604 TWO POST LIGHT DUTY BOLT ON ARM RESTRAINT GEAR 4 E
18 5746167 DOUBLE THREADED ROD M10 x 1.5 x 275 2 B
19 5530337 AB 3/4" x 6.3" 12 -
20 5900371 XPR-9S INSTALLATION MANUAL 1 -
21 5746192 ARM ADAPTER, MEDIUM 4 E
22 5701663 D2-8F, XPR-9 FOOT GUARD, L.H. 2 A
23 5701664 D2-8F, XPR-9 FOOT GUARD, R.H. 2 A
24 5701660 10AP/D2-12/15/XPR HEIGHT ADAPTER HOLDER 2 B
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
N UPDATED BOM REVISION 07/24/2020 CA 01182
P UPDATED BOM REVISION 10/05/2020 TM 01215
Q UPDATED BOM REVISION 06/22/2021 TM 01310
WHERE USED
XPR-9S
XPR-9TS
XPR-9S-LP
XPR-9SBT
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
Q
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
JM
5250037
XPR-9S PARTS BOX
12/15/2015
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
OR 06/30/2021
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
INSERT PARTS BAG INTO PARTS BOX FOR SHIPMENT 2.
HOSES AND CABLES IN REPRESENTATIONAL FORM 3.

2
10
1
3
15
16
14
12
4
5
13
8
9
11
18
6
7
17
20
21 19
24
23
22
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
Q
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5250037
XPR-9S PARTS BOX
1:25
SCALE:

DIMENSIONS ARE IN MM
☺
A
B
C
17
19
20
18
21
22
23
DETAIL A
SCALE 1 : 5
2
1
DETAIL B
SCALE 1 : 8
16
9
610
9
11
15
8
13
12
14
DETAIL C
SCALE 1 : 5
5
4
3
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
J
J-001
REPLACED 5505113 WITH 5505001
UPDATED NEXT ASSEMBLY
10/06/2014
12/17/2015
TM
TM
00663
00738
K
ADDED (4) 5535357, 5530093, 5545005, AND
5580012
02/03/2020 TM 01107
L
REPLACED 5505001 WITH 5505113, REMOVED
(2) 5540075
10/05/2020 TM 01215
NEXT ASSEMBLY
5250037
ITEM NO. PART NUMBER DESCRIPTION QTY REV
1 5550153 FTG ELB -04 NPT F x -04 JIC 1 -
2 5550181 FTG TEE -04 JIC x -04 JIC x 04 NPT 1 -
3 5545200 WASHER M10 x Ø18 SL 4 -
4 5535998 NUT M10 x 1.5 4 -
5 5530760 HHB M10 x 1.5 x 38 4 -
6 5535001 NUT M8 x 1.25 NL 4 -
7 5550103 FTG ELB -04 JIC -06 ORB 1 -
8 5540075 R.H., 2.5 WIRE DIA., Ø20.5 x 75 LG 2 B
9 5530261 PHPS M6 x 1 x 10 8 -
10 5530010 HHB M8 x 1.25 x 25 4 -
11 5545347 WASHER, M12 FLAT WASHER 2 -
12 5530756 HHB M6 x 1 x 25 4 -
13 5535357 NUT M6 x 1.0 NL 8 -
14 5505350 MODEL#211 HAIR PIN/ LARGE 4 -
15 5535354 NUT M12 x1.75 2 -
16 5505113 2 POST SAFETY CLEVIS PIN 4 H
17 5545535 C WASHER SHIM FOR LIFTS 20 -
18 5535013 NUT M10 x 1.5 NL 4 -
19 5545341 WASHER M10 x Ø20 FLAT 4 -
20 5505031 ROTOR CLIP 12mm SS 1 -
21 5530093 HHB M6 x 1 x 20 4 -
22 5545005 M6 FLAT WASHER 8 -
23 5580012 LIQUID PTFE THREAD SEALANT 50ml 1 -
WHERE USED
XPR-9 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
L
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5174215
XPR-9 PARTS BAG
11/20/2009
DO NOT SCALE DRAWING
1:20
SCALE:
THIRD ANGLE PROJECTION
OR 10/15/2020
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
1
2
3
4
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600381 D2-8/XPR-9 PULLEY HOUSING WELDMENT 1 F
2 5600082 PL-7000XR/XPR-9S CHAIN ROLLER PIN WELDMENT 1 G
3 5215073 PL-7000XR/XPR-9 CHAIN ROLLER ASSEMBLY 1 H
4 5540006 SNAP RING TRUARC 5103-100 1 -
NEXT ASSEMBLY
5215391
5215392
5215914
5215915
5215993
5215994
5215997
5215998
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E
UPDATED BOM REVISIONS AND NEXT
ASSEMBLIES
06/24/2013 TM 00605
F
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED NEXT ASSEMBLY AND BOM REVISIONS
11/25/2015 TM 00738
G
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED BOM REVISIONS AND NEXT ASSEMBLY
03/08/2018 CA 00929
WHERE USED
D2-8F
XPR-9 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5210117
D2-8F, XPR-9S CHAIN
ROLLER ASSEMBLY
01/06/2006
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
CA 03/13/2018
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
3
2
4
1
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
H
H-001
H-002
H-003
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
05/21/2012
07/03/2013
08/19/2013
07/17/2014
TM
TM
TM
TM
00517
00605
00615
00661
J
UPDATED TITLE TO REFLECT MARKETING,
UPDATED BOM REVISIONS AND NEXT
ASSEMBLIES
11/23/2015 TM 00738
K UPDATED BOM REVISION 11/16/2017 TM 00900
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5210154
XPR-9/9D TOP EQUALIZER PULLEY PLATE
WELDMENT
1 G
2 5620141 XPR-9/10 CABLE SHEAVE PIN WELDMENT 1 F
3 5575111 XPR-9S/10 SHEAVE ASSEMBLY 1 G
4 5530030 HHB M6 x 1 x 8 1 -
WHERE USED
XPR-9 SERIES
NEXT ASSEMBLY
5260553
5260557
5260558
5260611
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215226
XPR-9/9D TOP EQUALIZER
PULLEY PLATE ASSEMBLY
02/26/2010
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
AW 12/20/2017
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
3
4
1
6
2
5
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
F UPDATED BOM REVISION 09/21/2016 DB 00780
G
G-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLY
02/05/2018
05/14/2018
TS
TM
00922
00946
H
H-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLIES
05/30/2018
06/25/2018
TM
TM
00953
00964
WHERE USED
10AP SERIES
XPR-9 SERIES
XPR-10 SERIES
ITEM NO. PART NUMBER DESCRIPTION QTY REV
1 5715017
ROUND LIFT PAD ADAPTER POLYURETHANE
PAD
1 E
2 5540025 S RING Ø35mm 1 --
3 5746692 INNER SCREW 1 C
4 5540026 S RING Ø45mm 2 --
5 5746693 ROUND LIFT PAD SCREW ADAPTOR 1 D
6 5601001 ROUND LIFT PAD ADAPTOR WELDMENT 1 D
NEXT ASSEMBLY
5250037
5250083
5250084
5250087
5250088
5250089
5250203
5250236
5250252
5250296
5250299
5250312
5250313
5250329
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
H
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
CHY
5215704
ROUND ADJUSTABLE LIFT
PAD ASSEMBLY
06/14/2015
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
CA 06/29/2018
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

1359
12
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C
C-001
C-002
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLY
02/06/2012
06/20/2013
08/19/2013
TM
TM
TM
00490
00605
00615
D
REPLACED 5570110 WITH 5570129 TO REFLECT
INVENTORY, UPDATED TITLE TO REFLECT WHERE
USED
11/24/2014 TM 00673
E
UPDATED TITLE TO REFLECT MARKETING,
UPDATED NEXT ASSEMBLY
12/01/2015 TM 00738
NEXT ASSEMBLY
5250225
5250328
5250329
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5570129 Ø6.4 ID HYDRAULIC HOSE 1293mm* --
2 5550325 FTG NPL Ø1/4 CRIMP x -04 JIC 2 --
WHERE USED
D2-8F
XPR-9 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
GJ
5570103
D2-8F, XPR-9 HYDRAULIC HOSE
ASSY Ø6.35 x 1359mm DS
10/13/2008
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
CA 02/22/2016
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±1.0
0.00 = ±0.25
0.000 = ±0.13
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED.
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
(*)ITEM 1 QTY FOR REFERENCE ONLY 2.

2985
12
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C
REPLACED 5570110 WITH 5570129 TO REFLECT
INVENTORY, UPDATED TITLE TO REFLECT WHERE
USED
11/24/2014 TM 00673
D
UPDATED TITLE TO REFLECT MARKETING,
UPDATED NEXT ASSEMBLY
12/01/2015 TM 00738
E
UPDATED TITLE TO REFLECT MARKETING,
UPDATED NEXT ASSEMBLY
09/24/2018 CA 01001
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5570129 Ø6.4 ID HYDRAULIC HOSE 1 A
2 5550325 FTG NPL Ø1/4 CRIMP x -04 JIC 2 A
NEXT ASSEMBLY
5250037
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5570104
XPR-9 HYDRAULIC HOSE
ASSY Ø6.35 x 2985mm DS
11/13/2009
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
CA 09/24/2018
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±1.0
0.00 = ±0.25
0.000 = ±0.13
ANGULAR: MACH 2
°
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED.
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
(*)ITEM 1 QTY FOR REFERENCE ONLY 2.

PART SPECIFICATION FORM
ACP
BENDPAK Number:
5570129
MRP Description:
¼” HYDRAULIC HOSE 31 CL-0400X
Date:
05/24/2018
ECO :
00950
1. Engineering Specification
Application:
¼” HYDRAULIC HOSE
Detailed Description:
ONE or TWO BRAID STEEL WIRE HYDRAULIC HOSE
SIZE: 1/4” / 6mm I.D. MIN
0.53” / 13.4mm O.D. MAX
SPECS: 5700PSI OR 393 BAR WORKING PRESSURE MINIMUM
17100PSI OR 1179 BAR MINIMUM BURST PRESSURE MINIMUM
3” / 80mm MIN BEND RADIUS
COLOR: BLACK
ADDITIONAL CONTACT INFORMATION:
Xin Yurong
Shandong Ningjin High Energy Hose Co., Ltd.
Tel: [phone]
No. 7, Taishan Rd., Industrial Park, Ningjin County, Shandong, China
Approved Vendor
Vendor Part #
Contact #
AUTHORIZED
COMPONENT PROVIDER
1) Ningjin Hydraulic Hose
Co.
5570129
[phone]
X
2)
OR BENDPAK ENGINEERING APPROVED EQUIVALENT
2. Vendor Information (Or for Reference)

330
1 2
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5570129 Ø6.4 ID HYDRAULIC HOSE 264mm* --
2 5550325 FTG NPL Ø1/4 CRIMP x -04 JIC 2 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
D
REPLACED 5570110 WITH 5570129 TO REFLECT
INVENTORY
11/20/2014 TM 00673
E
E-001
E-002
E-003
E-004
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
07/22/2015
02/22/2016
02/02/2017
05/14/2018
06/25/2018
JM
CA
TM
TM
TM
00712
00738
00806
00946
00964
F
UPDATED TITLE TO REFLECT STANDARDS,
UPDATED NEXT ASSEMBLY
01/15/2020 TM 01107
NEXT ASSEMBLY
5240054
5240821
5250037
5250088
5250089
5250203
5250252
5250328
5250329
WHERE USED
D2-8F
XPR-10S
XPR-10S-168
XPR-10XLS
XPR-10XLS-181
XPR-9 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5570176
HYDRAULIC HOSE ASSEMBLY
Ø6.35 x 330mm DS
08/30/2010
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
OR 4/17/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
ITEM 1 QTY FOR REFERENCE ONLY 2.

6400
5
4
21
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED NEXT ASSEMBLY
02/06/2012 TM 00490
D
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED NEXT ASSEMBLIES
06/20/2013 TM 00605
E
UPDATED TITLE TO REFLECT MARKETING,
UPDATED NEXT ASSEMBLY
12/01/2015 TM 00738
NEXT ASSEMBLY
5250037
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5595682 CABLE SAFETY Ø2.4mm 6440mm* -
2 5580210 Ø2.4mm OVAL CABLE CRIMP 1 -
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
AC
5595161
XPR-9 Ø2.4mm x 6400
SAFETY CABLE
11/20/2009
DO NOT SCALE DRAWING
1:1
SCALE:
THIRD ANGLE PROJECTION
CA 02/22/2016
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
ANGULAR: 0. =
2
°
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
ASSEMBLE ITEMS AS SHOWN 1.
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.
INNER EYE LOOP DIAMETER OF Ø15mm 4.

9463.0
9507.0
330.0
18.0
9133.0
19.5
44.0
1
2 3
4
5
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5746021 Ø10 CABLE END CONNECTOR 2 E
2 5595011 CABLE, LIFTING Ø10mm 9447mm* A
3 5746022 Ø10 THREADED CABLE CONNECTOR 1 D
4 5545342 WASHER M18 FLAT 1 --
5 5535358 NUT M18 x 2.5 NL 1 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B
B-001
B-002
B-003
B-004
9507 WAS 9537, 9133 WAS 9163, 9463 WAS 9493
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLY
04/07/2011
04/18/2011
06/20/2013
08/19/2013
12/01/2015
MT
MT
TM
TM
TM
00453
00454
00605
00615
00738
C UPDATED BOM REVISION 11/01/2017 TM 00900
D
UPDATED TITLE TO REFLECT STANDARD, ADDED
5535358 AND 5545342
02/18/2020 TM 01107
NEXT ASSEMBLY
5250037
WHERE USED
XPR-9 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5595359
CABLE ASSEMBLY
Ø10 x 9507mm DBST
08/27/2010
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
OR 04/09/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
LENGTH SHOWN IS AFTER SWAGING 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.
THREAD 5535358 WITH 5545342 ONTO CABLES FOR SHIPMENT 4.