Bend-Pak XPR-12CL User manual

BendPak, Inc. Corporate Oce
1645 Lemonwood Drive
Santa Paula, CA 93060 USA
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Customer Service Desk / Warranty
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
customerservic[email protected]
Parts Orders
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Domestic Sales & Service
USA Sales Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
International Sales & Service
Oce Tel: [phone]
Exports Dept: 1-805-933-9970 EXT. 192
Ext. Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
bpkex[email protected]om
Service Manual
SERVICE PARTS & DIAGRAMS
This guide is a troubleshooting reference used for maintaining and
servicing your Bend Pak product. It provides comprehensive information
on identifying serviceable parts and components and assists in
troubleshooting problems and performing assembly /disassembly
procedures.
BENDPAK
XPR-12CL
PRODUCT SKU
5175405
DRAWING Nº
5260567
CATEGORY
Two Post Li
REV
Version V
DATE
08.23.2021

DIMENSIONS ARE IN MM
☺
2
1
3
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5245138 XPR-12CL LIFT SUPERSTRUCTURE 1 AE
2 5250254 XPR-12CL PARTS BOX 1 F
3 5215283 XPR-12CL/FDL TRIPLE TELESCOPING ARM ASSEMBLY 4 K
- 5905109 WARNING ALI/WL 101 1 -
- 5905131 2 POST DECAL KIT, LESS ALI 1 E
- 5905404 MAX CAPACITY 12K DANGER LABEL, ENGLISH-FRENCH 1 -
- 5905465 MANUFACTURER LABEL 1 -
- 5905660 MAX CAPACITY NTRL 12K LABEL, ENGLISH-FRENCH 1 -
- 5905940 PRODUCT DATA LABEL 1 -
- 5905950 SERIAL TAG A 1 -
- 5905653 LABEL; ALI-ALCTV-2017 GOLD LABEL, US; MET LABS 1 -
- 5905414 GP/XPR LOCK-RELEASE LABEL 1 -
- 5905285 SERIALTAG EXTERIOR PEEL OFF INVENTORY LABEL 1 -
- 5905377 NOTICE LABEL, ALI/WLSIA01 1 -
- 5906044 AMERICAN OWNED LABEL 1 -
- 5905775 CALIFORNIA PROP. 65 LABEL 1 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
T UPDATED BOM REVISION 12/22/2020 TM 01251
U ADDED 5906044, UPDATED BOM REVISION 06/24/2021 TM 01310
V ADDED 5905775 08/09/2021 TM 01321
SHEET 1 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
V
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5260567
XPR-12CL PRODUCTION
LIFT VER E
12/15/2015
DO NOT SCALE DRAWING
1:40
SCALE:
THIRD ANGLE PROJECTION
OR 08/12/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE COLORS & GRAPHICS FOR LABEL PLACEMENT 2.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 3.

168.701in
4285.0mm
119.409in
3033.0mm
[5.618-74.618"]
142.7-1895.1mm
[13.016-82.016"]
330.6-2083.2mm
WITH 63mm [2.5"] &
125mm [5"] ADAPTERR
142.402in
3617.0mm
104.843in
2663.0mm
DRIVE THRU
155.157in
3941.0mm
[29.724-57.992in]
755-1473mm
SHEET 2 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
V
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260567
XPR-12CL PRODUCTION
LIFT VER E
1:50
SCALE:

DIMENSIONS ARE IN MM
☺
3
2
1
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
AC UPDATED BOM REVISIONS 05/16/2019 TS 01086
AD UPDATED BOM REVISIONS 03/09/2020 TM 01107
AE UPDATED BOM REVISIONS 12/22/2020 TM 01251
NEXT ASSEMBLY
5260563
5260567
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5215293 XPR-12CL POWER SIDE POST ASSEMBLY 1 AD
2 5215292 XPR-12CL OFF SIDE POST ASSEMBLY 1 AD
3 5210031 XPR-12/15/18C TOP TROUGH ASSEMBLY 1 L
WHERE USED
XPR-12CL
XPR-12CL-192
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
AE
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5245138
XPR-12CL LIFT
SUPERSTRUCTURE
01/29/2010
DO NOT SCALE DRAWING
1:35
SCALE:
THIRD ANGLE PROJECTION
OR 12/31/2020
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

DIMENSIONS ARE IN MM
☺
1
7
8
2
3
6
4
5
9
10
11
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
AB UPDATED BOM REVISION 05/15/2019 TS 01086
AC UPDATED BOM REVISION 03/09/2020 TM 01107
AD UPDATED BOM REVISION 12/22/2020 TM 01251
NEXT ASSEMBLY
5245138
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600404 XPR-12/15/18CL OFF SIDE POST WELDMENT 1 L
2 5575113 D2/XPR-12/15/18 SHEAVE ASSEMBLY 1 E
3 5620142
D2-12/15, XPR-12C/12FD/15/18C CABLE SHEAVE
PIN WELDMENT
1 A
4 5575112 D2/GP/PCL/0XPR/PL-7000 SAFETY SHEAVE 1 C
5 5565350 D2/GP/PCL/XPR/PL-7000 SAFETY SHEAVE SPACER 1 C
6 5530030 HHB M6 x 1 x 8 1 -
7 5530756 HHB M6 x 1 x 25 1 -
8 5535357 NUT M6 x 1.0 NL 1 -
9 5215269 XPR-12C LIFT HEAD ASSEMBLY 1 T
10 5502305 CYLINDER ASSEMBLY Ø2.5 x 69 1 J
11 5701115 CYLINDER CLAMP ASSY-74-79 1 -
WHERE USED
XPR-12CL SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
AD
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215292
XPR-12CL OFF SIDE
POST ASSEMBLY
01/05/2010
DO NOT SCALE DRAWING
1:25
SCALE:
THIRD ANGLE PROJECTION
OR 12/31/2020
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
1
7
8
2
3
6
9
4
5
11
10
12
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
AB UPDATED BOM REVISION 05/15/2019 TS 01086
AC UPDATED BOM REVISIONS 03/09/2020 TM 01107
AD UPDATED BOM REVISION 12/22/2020 TM 01251
NEXT ASSEMBLY
5245138
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5600399 XPR-12/15/18CL POWER SIDE POST WELDMENT 1 M
2 5575113 D2/XPR-12/15/18 SHEAVE ASSEMBLY 1 E
3 5620142
D2-12/15, XPR-12C/12FD/15/18C CABLE SHEAVE PIN
WELDMENT
1 A
4 5575112 D2/GP/PCL/0XPR/PL-7000 SAFETY SHEAVE 1 C
5 5565350 D2/GP/PCL/XPR/PL-7000 SAFETY SHEAVE SPACER 1 C
6 5530030 HHB M6 x 1 x 8 1 -
7 5530756 HHB M6 x 1 x 25 1 -
8 5535357 NUT M6 x 1.0 NL 1 -
9 5520001 RUBBER GROMMET, 3/4 I.D. 1 -
10 5215269 XPR-12C LIFT HEAD ASSEMBLY 1 T
11 5502305 CYLINDER ASSEMBLY Ø2.5 x 69 1 J
12 5701115 CYLINDER CLAMP ASSY-74-79 1 -
WHERE USED
XPR-12CL
XPR-12CL-192
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
AD
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215293
XPR-12CL POWER SIDE
POST ASSEMBLY
01/05/2010
DO NOT SCALE DRAWING
1:25
SCALE:
THIRD ANGLE PROJECTION
OR 12/31/2020
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
A
B
4
7
1
5
6
13
14
DETAIL A
SCALE 1 : 4
11
10
1516
9
DETAIL B
SCALE 1 : 4
2
8
3
12
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
J UPDATED BOM REVISION 08/22/2012 TM 00542
K
REPLACED 5210002 WITH 5600452, 5620445
AND 5300815, ADDED (2) 5530055, UPDATED
BOM REVISIONS
05/12/2015 TM 00689
L UPDATED BOM REVISOINS 11/03/2017 TM 00900
NEXT ASSEMBLY
5245138
5245139
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5600380 XPR-12/15/18C TOP TROUGH WELDMENT 1 E
2 5565350 GP/PCL/XPR/PL-7000 SAFETY SHEAVE SPACER 2 C
3 5575112 GP/PCL/XPR/PL-7000 SAFETY SHEAVE 2 C
4 5600452 XPR-12/15/18 TRIP STOP BAR WELDMENT 1 A
5 5575113 XPR-12/15/18 SHEAVE ASSEMBLY 4 E
6 5620142 XPR-12C/12FD/15/18C CABLE SHEAVE PIN WELDMENT 4 A
7 5530030 HHB M6 x 1 x 8 4 --
8 5530756 HHB M6 x 1 x 25 2 --
9 5530738 HHB M10 x 1.5 x 25 2 --
10 5545341 WASHER M10 x Ø20 FLAT 2 --
11 5535013 NUT M10 x 1.5 NL 2 --
12 5535357 NUT M6 x 1.0 NL 2 --
13 5580211 STEEL HOLE PLUG 1 1/4" 1 --
14 5300815 XPR STOP BAR CUSHION 1 D
15 5620445 XPR TRIP STOP BAR SLIDER WELDMENT 1 C
16 5530055 SSS M6x1x10 2 --
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
L
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5210031
XPR-12/15/18C TOP
TROUGH ASSEMBLY
11/10/2009
DO NOT SCALE DRAWING
1:18
SCALE:
THIRD ANGLE PROJECTION
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
2
1
4
7
8
3
5
6
9
100
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
Q UPDATED BOM REVISION 03/07/2018 CA 00929
R UPDATED BOM REVISION 03/29/2018 TM 00930
T UPDATED BOM REVISIONS 03/09/2020 TM 01107
NEXT ASSEMBLY
5215292
5215293
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600392 XPR-12CL LIFT HEAD WELDMENT 1 L
2 5716001 2 POST GUIDE BLOCK 8 G
3 5746099 XPR-12C/FD/15/18C Ø25mm LONG GEAR SHAFT 2 E
4 5701052 GP/XPR ARM INTERNAL GEAR STOP 2 F
5 5540130 XPR-12C/FD/15/18C LIFT HEAD SPRING 2 A
6 5580219 KEYRING 56mm x 3mm 2 -
7 5505106 SPRING PIN M6 x 50 2 -
8 5540006 SNAP RING TRUARC 5103-100 2 -
9 5930184 XPR-12/15/18 LIFT HEAD GUSSET COVER 1 C
WHERE USED
XPR-12CL
XPR-12CL-192
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
T
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215269
XPR-12C LIFT HEAD
ASSEMBLY
11/27/2009
DO NOT SCALE DRAWING
1:12
SCALE:
THIRD ANGLE PROJECTION
OR 04/15/2020
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
1
2
3
4
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
H UPDATED BOM REVISION 05/30/2018 TM 00953
J UPDATED BOM REVISION 08/12/2019 CA 01117
K UPDAT ED BOM REVISION 80/23/2019 TM 01123
NEXT ASSEMBLY
5260563
5260567
5260568
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5600993 XPR-12CL/FDL TRIPLE TELESCOPING ARM WELDMENT 1 K
2 5545341 WASHER M10 x Ø20 FLAT 3 -
3 5545200 WASHER M10 x Ø18 SL 3 -
4 5530302 HHB M10 x 1.5 x 40 FULLY THREAD 3 -
WHERE USED
XPR-12FDL
XPR-12CL
XPR-12CL-192
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
JM
5215283
XPR-12CL/FDL TRIPLE
TELESCOPING ARM
ASSEMBLY
06/23/2015
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
CA 08/26/2019
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
NEXT ASSEMBLY
5260567
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5174518 D2-12/15, XPR CLEARFLOOR PARTS BAG 1 N
2 5736605
D2-12C/XPR-12 BOLT ON ARM RESTRAINT GEAR
4 E
3 5746192 ARM ADAPTER, MEDIUM 4 E
4 5746193 ARM ADAPTER, LONG 4 D
5 5716174
D2-8/12/15, GP/XPR OFF SIDE PLASTIC SAFETY COVER
1 B
6 5716173
D2-8/12/15, GP/XPR POWER SIDE PLASTIC SAFETY COVER
1 B
7 5215701 ROUND LIFT PAD ADAPTER ASSEMBLY 4 D
8 5715003 POWER UNIT VIBRATION DAMPENER 1 B
9 5210010 D2/XPR OFF SIDE SAFETY WELDMENT 1 F
10 5210196
D2/XPR POWER SIDE INCLINED SAFETY ASSEMBLY
1 C
11 5505346 D2/XPR-12C/FD LIFT HEAD PIN WELDMENT 4 B
12 5570150 HYDRAULIC HOSE ASSEMBLY Ø6.35 x 9611mm SB 1 E
13 5570017 HYDRAULIC HOSE ASSEMBLY Ø10 x 1219mm SB 1 D
14 5570832 HYDRAULIC HOSE ASSEMBLY Ø6.35 x 2299mm SB 1 F
15 5595125 Ø2.4mm x 8900 SAFETY CABLE 1 C
16 5595922 CABLE ASSEMBLY Ø12 x 10640mm ST 2 D
17 5540281 C RING Ø38mm OD 5103-150 4 -
18 5746166 DOUBLE THREADED ROD M10 x 1.5 x 295 2 B
19 5525150 SPDT MICRO SWITCH;25A@125VAC 1 -
20 5520116 14-4 SJO UL 62 CABLE 300vac 4275mm* -
21 5525112 MICRO SWITCH COVER-5PA2 1 -
22 5716634 D2/10AP/XPR MICROSWITCH COVER, PLASTIC 1 B
23 5215702 CRADLE LIFT PAD LARGE ADAPTER ASSEMBLY 4 E
24 5530308 AB 3/4" x 7" 14 -
25 5550112 FTG NPL -04 NPT x -04 F NPT 2 -
26 5900370 XPR-12CL-18CL INSTALLATION MANUAL 1 -
27 5701660 10AP/D2-12/15/XPR HEIGHT ADAPTER HOLDER 2 B
28 5701661 D2/XPR-12/15/18 FOOT GUARD, R.H. 2 A
29 5701662 D2/XPR-12/15/18 FOOT GUARD, L.H. 2 A
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
D
ADDED 5701660, 5701661 AND 5701662, REMOVED
5535011 AND 5545345, UPDATED BOM REVISIONS
03/09/2020 TM 01107
E UPDATED BOM REVISION 10/05/2020 TM 01215
F UPDATED BOM REVISION 06/22/2021 TM 01310
WHERE USED
XPR-12CL
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5250254
XPR-12CL PARTS BOX
10/17/2018
DO NOT SCALE DRAWING
1:28
SCALE:
THIRD ANGLE PROJECTION
OR 07/01/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
FOR 5220116 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 3.
(*)5520116 QTY FOR REFERENCE ONLY 4.

10
8
11
7
12
15 13
14
16
4
3
5
9
17
18
2
24
20
19
26
21
23
1
22
25
6
27
28
29
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5250254
XPR-12CL PARTS BOX
1:22
SCALE:

DIMENSIONS ARE IN MM
☺
A
B
C
E
D
4
18
21
28
DETAIL A
SCALE 1 : 12
15
13
14
20
19
DETAIL B
SCALE 1 : 12
1
16
78
12
11
2
9
10
5
DETAIL C
SCALE 1 : 4
3
6
DETAIL E
SCALE 1 : 4
23
17
22
24
DETAIL D
SCALE 1 : 4
25
27
26
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
L
REMOVED 5520001, UPDATED NEXT
ASSEMBLIES
10/10/2018 TM 01011
M
ADDED 5535357, 5530093, 5545005, AND
5580012, REPLACED 5530750 WITH 5530799
02/20/2020 TM 01107
N
REPLACED 5505001 WITH 5505113, REMOVED
(2) 5540075
10/05/2020 TM 01215
NEXT ASSEMBLY
5250083
5250084
5250088
5250203
5250254
5250266
5250268
5250314
5250315
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5505113 2 POST SAFETY CLEVIS PIN 2 H
2 5715196 D2/XPR POLYETHYLENE COVER BLOCK 105 x 80 2 D
3 5535022 NUT 9/16"-18 JN 1 -
4 5550113 FTG ELB -04 NPT L x -04 JIC 2 -
5 5550183 FTG ELB -06 JIC -06L ORB 1 -
6 5550003 FTG TEE -04JIC -04JIC -06JIC 1 -
7 5505350 MODEL#211 HAIR PIN/ LARGE 2 -
8 5530261 PHPS M6 x 1 x 10 4 -
9 5545347 WASHER, M12 FLAT WASHER 2 -
10 5535354 NUT, M12 x1.75 2 -
11 5535001 NUT M8 x 1.25 NL 4 -
12 5530010 HHB M8 x 1.25 x 25 4 -
13 5545200 WASHER M10 x Ø18 SL 4 -
14 5535998 NUT M10 x 1.5 4 -
15 5530760 HHB M10 x 1.5 x 38 4 -
16 5540075 R.H., 2.5 WIRE DIA., Ø20.5 x 75 LG 2 B
17 5530799 HSDS M4.2 x 1.41 x 20 2 -
18 5545535 C WASHER SHIM FOR LIFTS 20 -
19 5545341 WASHER M10 x Ø20 FLAT 4 -
20 5535013 NUT M10 x 1.5 NL 4 -
21 5505031 ROTOR CLIP 12mm SS 1 -
22 5530115 BHS 6-32 x 1.25 2 -
23 5535190 HN 6-32 2 -
24 5520140 ROMEX CONNECTOR 3/8 #6623 2 -
25 5530093 HHB M6 x 1 x 20 4 -
26 5545005 M6 FLAT WASHER 8 -
27 5535357 NUT M6 x 1.0 NL 4 -
28 5580012 LIQUID PTFE THREAD SEALANT 50ml 1 -
WHERE USED
D2-12C
D2-15C
XPR-10AXLS
XPR-10AS
XPR-10S
XPR-10XLS
XPR-12CL
XPR-12CL-LTA/15CL
XPR-18CL
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
N
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5174518
D2-12/15, XPR
CLEARFLOOR PARTS BAG
02/11/2010
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
OR 10/19/2020
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.

DIMENSIONS ARE IN MM
☺
2
1
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B
B-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLY
04/22/2016
07/05/2017
CA
TM
00750
00849
C UPDATED BOM REVISION 02/09/2018 TS 00922
D UPDATED BOM REVISION 05/31/2018 TM 00953
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600999 ROUND LIFT PAD WELDMENT 1 C
2 5715017 ROUND LIFT PAD ADAPTER POLYURETHANE PAD 1 E
NEXT ASSEMBLY
5250254
5250263
5250264
5250266
5250267
5250268
5250269
5250314
5250315
WHERE USED
D2-12C
D2-15C
XPR-12 SERIES
XPR-15 SERIES
XPR-18 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
JM
5215701
ROUND LIFT PAD
ADAPTER ASSEMBLY
06/26/2015
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
CA 06/18/2018
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
3
2
1
4
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C
C-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLY
04/22/2016
07/05/2017
CA
TM
00750
00849
D UPDATED BOM REVISION 02/26/2018 TM 00930
E UPDATED BOM REVISION 05/31/2018 TM 00953
NEXT ASSEMBLY
5250254
5250263
5250264
5250266
5250267
5250268
5250269
5250314
5250315
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5601000 CRADLE LIFT PAD WELDMENT 1 C
2 5715020 CRADLE LIFT PAD LARGE POLYURETHANE PAD 1 C
3 5530022 BPHS M6 x 1 x 20 ZPL 4 --
4 5535357 NUT M6 x 1.0 NL 4 --
WHERE USED
D2-12/15 SERIES
XPR-12FDL SERIES
XPR-12CL SERIES
XPR-15 SERIES
XPR-18 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
JM
5215702
CRADLE LIFT PAD LARGE
ADAPTER ASSEMBLY
06/24/2015
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
CA 06/18/2018
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

1219
13 2
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED NEXT ASSEMBLIES
01/12/2012 TM 00490
C
C-001
C-002
C-003
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLY
06/21/2013
10/16/2014
11/24/2015
06/25/2018
TM
TM
TM
TM
00605
00663
00738
00964
D
UPDATED TITLE TO REFLECT STANDARDS,
UPDATED NEXT ASSEMBLY
01/15/2020 TM 01107
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5570116 Ø10 ID HYDRAULIC HOSE 1144mm* -
2 5550337 FTG ELB -06 CRIMP x -06 JIC 1 -
3 5550336 FTG NPL -06 CRIMP x -06 JIC 1 -
NEXT ASSEMBLY
5250084 5250314
5250087 5250315
5250088
5250089
5250254
5250264
5250266
5250267
5250268
5250269
5250296
5250297
5250298
5250299
WHERE USED
10AP
10AP-168
D2-10/12/15 SERIES
XPR CLEARFLOOR
SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5570017
HYDRAULIC HOSE ASSEMBLY
Ø10 x 1219mm SB
08/27/2009
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
OR 04/17/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
ITEM 1 QTY FOR REFERENCE ONLY 2.

PART SPECIFICATION FORM
ACP
BENDPAK Number:
5570129
MRP Description:
¼” HYDRAULIC HOSE 31 CL-0400X
Date:
05/24/2018
ECO :
00950
1. Engineering Specification
Application:
¼” HYDRAULIC HOSE
Detailed Description:
ONE or TWO BRAID STEEL WIRE HYDRAULIC HOSE
SIZE: 1/4” / 6mm I.D. MIN
0.53” / 13.4mm O.D. MAX
SPECS: 5700PSI OR 393 BAR WORKING PRESSURE MINIMUM
17100PSI OR 1179 BAR MINIMUM BURST PRESSURE MINIMUM
3” / 80mm MIN BEND RADIUS
COLOR: BLACK
ADDITIONAL CONTACT INFORMATION:
Xin Yurong
Shandong Ningjin High Energy Hose Co., Ltd.
Tel: [phone]
No. 7, Taishan Rd., Industrial Park, Ningjin County, Shandong, China
Approved Vendor
Vendor Part #
Contact #
AUTHORIZED
COMPONENT PROVIDER
1) Ningjin Hydraulic Hose
Co.
5570129
[phone]
X
2)
OR BENDPAK ENGINEERING APPROVED EQUIVALENT
2. Vendor Information (Or for Reference)

9611
3
1 2
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C
C-001
UPDATED TITLE TO REFLECT WHERE USED
UPDATED NEXT ASSEMBLIES
02/15/2012
07/02/2013
TM
TM
00490
00605
D
D-001
REPLACED 5570110 WITH 5570129
UPDATED NEXT ASSEMBLIES
12/01/2014
12/16/2015
TM
TM
00673
00738
E UPDATED TITLE TO REFLECT STANDARD 03/09/2020 TM 01107
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5570129 Ø6.4 ID HYDRAULIC HOSE 9551mm* --
2 5550325 FTG NPL Ø1/4 CRIMP x -04 JIC 1 --
3 5550345 FTG ELB Ø1/4 CRIMP x -04 JIC 1 --
NEXT ASSEMBLY
5250254
5250266
5250268
5250314
5250315
WHERE USED
D2-12C
D2-15C
XPR-12CL
XPR-12CL-LTA
XPR-15CL
XPR-18CL
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
GJ
5570150
HYDRAULIC HOSE ASSEMBLY
Ø6.35 x 9611mm SB
10/20/2008
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
OR 4/17/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±1.0
0.00 = ±0.25
0.000 = ±0.13
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED.
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
(*)ITEM 1 QTY FOR REFERENCE ONLY 2.

2299.0
3 1 2
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
D
D-001
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
06/27/2017
10/16/2014
TM
TM
00605
00663
E
E-001
E-002
REPLACED 5570110 WITH 5570129 TO REFLECT
INVENTORY
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
11/20/2014
11/24/2015
06/25/2018
TM
TM
TM
00673
00738
00964
F
UPDATED TITLE TO REFLECT STANDARDS,
UPDATED NEXT ASSEMBLY
01/15/2020 TM 01107
NEXT ASSEMBLY
5250084 5250314
5250087 5250315
5250088
5250089
5250254
5250264
5250266
5250267
5250268
5250269
5250296
5250297
5250298
5250299
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5570129 Ø6.4 ID HYDRAULIC HOSE 2249mm* --
2 5550325 FTG NPL Ø1/4 CRIMP x -04 JIC 1 --
3 5550345 FTG ELB Ø1/4 CRIMP x -04 JIC 1 --
WHERE USED
10AP
10AP-168
D2-10 SERIES
D2-12/15C
XPR CLEARFLOOR
SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
GJ
5570832
HYDRAULIC HOSE ASSEMBLY
Ø6.35 x 2299mm SB
10/13/2008
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
OR 04/17/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
ITEM 1 QTY FOR REFERENCE ONLY 2.

8900
5
15.0
21
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 800279 08/24/2009 TM 00293
B
B-001
B-002
UPDATED TITLE TO REFLECT WHERE USED
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
02/15/2012
07/02/2013
12/15/2015
TM
TM
TM
00490
00605
00738
C
UPDATED TITLE TO REFLECT STANDARD,
UPDATED NEXT ASSEMBLY
03/09/2020 TM 01107
NEXT ASSEMBLY
5250254
5250266
5250268
5250314
5250315
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5595682 CABLE SAFETY Ø2.4mm 8940mm* --
2 5580210 Ø2.4mm OVAL CABLE CRIMP 1 --
WHERE USED
D2-12C
D2-15C
XPR-12CL SERIES
XPR-15CL SERIES
XPR-18CL SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5595125
Ø2.4mm x 8900
SAFETY CABLE
08/24/2009
DO NOT SCALE DRAWING
1:1
SCALE:
THIRD ANGLE PROJECTION
OR 4/17/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
ASSEMBLE ITEMS AS SHOWN 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.

10640
23.0
10585
29.5
55.0
3 1
25
4
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5595001 CABLE, LIFTING Ø12 10558mm* -
2 5746020 Ø12 THREADED CABLE CONNECTOR 1 D
3 5746019 Ø12 CABLE END CONNECTOR 1 F
4 5535011 NUT M22 x 2.5 NL 1 -
5 5545345 WASHER M22 x 50mm FLAT 1 -
WHERE USED
D2-12C
D2-15C
XPR-12CL
XPR-12CL-LTA
XPR-15CL
XPR-18CL
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B UPDATED BOM REVISION 11/03/2017 TM 00900
C UPDATED TITLE TO REFLECT WHERE USED 03/27/2019 TS 01066
D
UPDATED TITLE TO REFLECT STANDARD, ADDED
5535011 AND 5545345
03/09/2020 TM 01107
NEXT ASSEMBLY
5240868
5250254
5250266
5250268
5250314
5250315
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5595922
CABLE ASSEMBLY
Ø12 x 10640mm ST
01/05/2010
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
OR 4/17/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
LENGTH SHOWN IS AFTER SWAGING 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.
THREAD 5535011 WITH 5545345 ONTO CABLE FOR SHIPMENT 4.