Beok Controls TOL47 Series User manual

EP: Electric heating WPB: Gas boiler heating
Product packaging
Thermostat host 1 PC
Certificate of conformity 2PCS
Sensing line (optional) 1PC
Product parameters
WP : Water heating 3A;
EP : Electric heating 16A
WPB : Linkage; M:Gas boiler 3A
Electrical Specifications:
1.Temperature Sensor: NTC 2.Temperature accuracy: ±1℃
3. Display screen: LCD 4. Working environment: -5-50℃
5.Self-consumption power: <1W 6.Temperature setting: 5 ~60℃
7. Display range: 0-51℃ 8. Load current: water heater 3A
electric heater 16A
gas boiler heater 3A
9. Voltage: AC95- 220V, 50/60Hz
Icon description
WP: Water heating
Wiring Diagram
Mounting steps
1. Connect the power box
according to the wiring diagram
2. Separate the power supply
from the control board cable
3. Screw the power supply
into the box of 86
4. Connect the power board to the
control board line, and align the
buckle at 30 degrees to complete
the installation.
Welcome
Application
Thank you for your trust and support!
We have adopted advanced technology and perfect craftsmanship so that your new
thermostat will provide you with a sutable temperature environment every day in the
future. It makes your life more pleasant and artistic and making your living environment
more fashionable aesthetic.
For detailed instructions on installing and using this thermostat, please read this manual
carefully.
Please get in touch with a professional to install the thermostat for you. Besides, please
install and use this product within the scope of the law.
The intelligent digital humidity controller is a floor heating system suitable for room
temperature control and household temperature control. It controls the operating status
of the floor heating equipment by sensing the comparison between the ambient
temperature and the set temperature. While improving comfort, it achieves the purpose
of energy saving.
The digital thermostat adopts microcomputer control technology and has an elegant
design, and is easy to use. Moreover, it has manual and automatic functions,
programmable functions, and state memory functions.
This thermostat is used for water heating,
electric heating, or gas boiler.

07
When POWER OFF, press the M key and the key for 5 seconds to enter the
advanced setting.
Press the M key to enter the next option, then press the up and down key to adjust,
press the key to exit the advanced option setting mode.
01
02
03
04
05
06
07
08
09
10
Temperature
compensation
The default value of the calibration room temperature is -2℃ . Press
the up or down key to adjust the range from 9.9℃ to -9.9℃.
Sensor selection
Limit temperature
value modification
The temperature sensor selection defaults to IN. Press the up key or the down key
to adjust it respectively as IN internal sensor selection. ALL means all internal
sensors are selected; OUT means external sensors are set.
The limit temperature value is 35℃ by default. Press the up or down key to adjust
the range from 5℃ to 60℃.
The default setting temperature difference start is 1℃; press the up or down key to
adjust the range from 1℃ to 10℃.
Temperature difference
setting
Advanced Option Setting
Antifreeze function Set the antifreeze function as OFF by default; press the up key to turn on the
antifreeze function.
Rest day selection The default setting of rest days is double rest; press the up or down to adjust.
Main and auxili reverse
selection (optional)
Set the main and auxiliary reverse to 0 by default. Press the up or down key to
adjust 0 to turn off the main and additional reverse function, and 02 to indicate the
auxiliary reverse.
Passive linkage output
delay time (optional)
Set the passive linkage delay time as 0 by default. Press the up or down key to
adjust the range of 0-5 minutes.
Set temperature
upper limit Set the upper limit of the temperature to 60 ℃; press the up or down key to adjust
the range from 35℃ to 95℃.
Reset Set to restore factory settings. The default display is "-," press the up key to
display "---" and then press the enter key to restore the factory settings.
Operation Guide
1. Power on/off: press the key to turn on/off the thermostat.
2. Press the M key to switch between manual and automatic modes.
3. In the automatic mode, press the key or key to adjust the temperature, and it
will enter the automatic mode, which only runs for a while.
4. Press the key to enter the clock setting, press the mode key M to switch the
setting options, and press the up and down keys to adjust each parameter value.
Note: The time of the WIFI model will automatically obtain the Internet time.
5. Simultaneously press and hold the up and down keys for 5 seconds to add or
cancel the childlock.
6. WIFI link: When the thermostat is turned on, press and hold the up button for five
to eight seconds, the WIFI icon flashes on the thermostat display, and the thermostat
enters the code matching state.
Time programming instructions
Long press the M key to enter the programming setting, short press the M key to
switch options, press the up or down key to adjust the parameters of each option,
and press the 6 key to exit and save mode.