Beok Controls TOL62A Series User manual

VIII. Operation Instruction
1)Power key “ ”
Programming:6-event time and temperature
Key Event Symbol Time Default value
Day1~5 Day6~7
1
2
3
4
5
6
1
2
06:00
08:00
11:30
12:30
17:00
22:00
08:00
23:00
Set progammed
Set the start/end
20℃
15℃
15℃
15℃
22℃
15℃
22℃
15℃
You can turn on/off the thermostat by pressing this key. Also
you can confirm and exit by pressing key when you have
completed the setting of every parameter.
2)The increase key“ ”and the decrease key “ ”
In the period of programmable mode or manual mode, when you
press the increase/decrease key once, alternate display stops in
the bottom right region and the value of the pre-set temperature
will increase/decrease 0.5°C.It will recover the alternate display
with no operation for 5 seconds.
3)Time setting key
You can adjust the time and week by pressing the key “ ” hold
for 5 seconds, the. If it is pressed, the hour bit flashes. Then you
can press key and key to change its value. When you
complete the setting of hour bit, you can press this key to confirm
and continue the setting of minute and week bit sequently. After
the completion of time, you can press “ ” to confirm and exit.
4)Mode selection key“ ”
You can select programmable mode or manual mode by pressing
this key. If you press this key and hold for 5seconds, you can enter
to set the time.
5)Locking “ ”and unlocking
When you press and at the same time and hold for 5
seconds, the thermostat will be locked/unlocked. When it
is locked, no operation can be carried out until it is unlocked.
week
menu
period
manual
heating on
locking
plus key
1-6period
minus key
measure Y4
T11
T1
K1
T6
1 2
6)Mode of period programming
If you press“ ”and“ ”at the same time and hold for 5seconds,
you can enter the mode of period programming.

Electrical heating thermostat
TOL62A
BEOK