Berkley Jensen 280155 User manual

Note: The gazebo needs to be installed in cooperation with four people.
The following tools are not included and needed for assembly:
12.5’x12.5’
STEEL HARDTOP GAZEBO
ARTICLE# 280155
If you have comments or questions, please contact BJ’s Wholesale Club at 1-800-934-1204.
If you have any issues with the product, do not return the product back to the store.
For any questions, replacement parts or issues about our product, call Sunjoy Customer
Service 1(866) 578 6569. For further assistance, please email us at [e-mail].
ASSEMBLY INSTRUCTIONS
Drill Hammer Screwdriver Ladder 4 people

2/ 31
Warning! To reduce the risk of serious injury, read the following safety instructions before assembling
and using the gazebo.
Caution! Always keep children under close supervision while they are using or around this product.
Never leave children unattended.
This product is intended for outdoor use only.
The product should be assembled on a flat stable surface.
Do not assemble the gazebo on unstable surfaces.
Ensure the location and clearance of your gazebo is acceptable.
The gazebo must be anchored with stakes into the ground for added safety. It is recommended that
it should not be permanently attached to a concrete floor or platform.
Arrange the necessary manpower when assembling or moving the product.
Some parts may contain sharp edges. Wear protective gloves and glasses if necessary.
Keep children and pets away while setting up the gazebo.
Check all nuts and bolts periodically for tightness. When required, tighten them again.
Repairing and replacing parts should be done by a qualified technician.
The gazebo is intended for decorative and shade purposes only, and is not designed to withstand
harsh weather, including high winds, rain and snow.
If the product is not being used for long periods of time (e.g. winter), it should be stored in a clean,
dry environment.
Do not put a Liquid Propane or Wood Burning fire pit or fireplace inside the product.
Do not climb or place heavy objects onto the gazebo roof.
Retain the original packaging to store and protect the gazebo during the winter months.
Do not use or enter the gazebo if the following conditions exists：
1. Visible movement of supports, roofing panels or a sagging roof.
2. Unusual noise from the gazebo.
3. Deformed roof panels.
4. Damaged or missing bolts/fasteners.
Please check your HOA, Local, and State Governments prior to purchasing and assembling
gazebos. These local organizations may require permits and specific requirements for installation.
Maintain your instruction manual for future reference
Warranty: Please retain you receipt for proof of purchase.
I
mportant Safety Instructions

3/ 31
Description Label Part Number Qty Part Image
Post A P00020058101 4
Base Cover B P00610021401 4
Post Base C P00010041501 4
Cross Beam 1 D P00040112601 4
Cross Beam 2 E P00040112701 4
Connect Bar of
Cross Beam F P00050155001 4
Beam Cap G P00560044501 4
Brace 1 J P00500056201 4
Brace 2 K P00500056301 4
Brace Connector 1 L P00050155101 4
Brace Connector 2 M P00050155201 44
Dome Decoration
Frame N P00060191501 4
Top Skew Beam P P00060191701 4
Bottom Skew
Beam Q P00060191801 4
Middle Beam R P00060191901 4
Lateral Beam
Trabecula of The
Greater Roof 1
S P00060192001 4
Part List

4/ 31
Lateral Beam
Trabecula of The
Greater Roof 2
T P00060192101 4
Small Top
Connector U P00050154901 1
Small Top Skew
Beam V P00060191601 4
Small Top Inclined
Beam Support
Rod
W P00500056101 4
Dome Decoration
Frame X P00560044601 4
Small Roof
Decorative Panel Y P00560044701 4
Small Roof Panel AA P00070093301 4
Small Roof
Inclined Beam
Cover Plate
AB P00080032901 4
Small Top Cover AC P00090015101 1
Hook AD P005800001 1
Big Roof Top
Beam 1 AE P00060192201 4
Big Roof Top
Beam 2 AF P00060192301 4
Decorate Panel for
Post AG P00220033001 4
Big Top and Small
Cover 1 AJ P00070092701 4
Big Top and Small
Cover 2 AK P00070092801 4
Big Top and Middle
cover 1 AL P00070092901 4

5/ 31
Big Top and Middle
cover 2 AM P00070093001 4
Big Top and Large
Cover 1 AN P00070093101 4
Big Top and Large
Cover 2 AP P00070093201 4
Center Beam
Cover Plate AQ P00080033201 4
Inclined Beam Top
Cover AR P00080033001 4
Inclined Beam
Lower Cover Plate AS P00080033101 4
Lower Baffle of
Inclined Beam AT P00220032901 4

6/ 31
Label Description Part Number Qty Part Image
H1 Bolt M6*20 H100010050 181+10
H2 Bolt M6*25 H100010086 52+3
H3 Bolt M6*45 H100010059 20+1
H4 Bolt M6*75 H100010087 8+1
H5 Flat Washer
M6 H050030001 20+1
H6 M6 Rubber
Washer H050050018 24+2
H7 Nut M6 H040010004 20+1
HS Stake Φ8*180 H070010003 8
HW1 Wrench M6 H090010017 2
HW2 Allen Key M6 H090030002 1
Hardware Pack

7/ 31
1
Install the post base.

8/ 31
2
Install Cross Beam.

9/ 31
3
Connect the Cross Beam to post.

10 / 31
4
Connect the Cross Beam to post.

11 / 31
5
Install the Brace.

12 / 31
6
Install the Dome Decoration Frame.

13 / 31
7
Connect the Top Skew Beam to bottom Skew Beam.

14 / 31
8
Install the Skew Beam.

15 / 31
9
Install the Middle Beam.

16 / 31
V
10
Install the Lateral Beam Trabecula of The Greater Roof.

17 / 31
11
Install the Small Top Skew Beam (v) and Small TopInclined Beam Support Rod (w).

18 / 31
12
out
out
in
Install Dome Decoration Frame(x) and Small Roof Decorative Panel(Y).

19 / 31
13
Install the Small Roof Panel.

20 / 31
14
Install the Small Roof Inclined Beam Cover Plate (AB) and Small Top Cover (AC).