Bernini Fleur de Lis Decor Top User manual

Fleur de Lis
decor top
decor top
Instruction Manual

To install the Fleur de Lis Finial you will need to
use the clear extension tube included with your
Bernini™ Fountain.
Before installing the extension tube, pull the two
ends of the extension tube apart to about 9 inch-
es (22.8cm).
Fleur de Lis Decor Top Installation
Step 2: Attach the extension
tube to the water outlet in
the middle of the fountain
tier. NOTE: Extension must
be included.
Step 1: Remove the silicone
cap from the top of the
extension tube.
Step 3: Put the Fleur de
Lis Finial over the top of the
extension tube. Be careful
to keep the tube centered
in the hole at the top of the
Fleur de Lis Finial.
Step 4: The Fleur de Lis Finial
locks into place using a key
system in the middle of the
fountain tier. (See illustration to
the right) Align the bottom of the
nial to the top of the fountain tier
and twist the Fleur de Lis Finial a
quarter turn clockwise to lock it
into place.
Note: You will notice that there are two dierent sized tabs on the
bottom of the Fleur de Lis Finial and there are two corresponding
grooves in the top of the Fountain Tier. These tabs t together and
lock when turned clockwise.
Bottom of
Fleur de Lis Finial
Top of Fountain Tier
1

Fleur de Lis Decor Top Installation (continued)
Step 5: Replace the silicone
cap on to the extension tube.
Step 6: Press the extension
tube down until it is level with
the Fleur de Lis Finial.
At this point, your fountain should look like
the image on the left. You are now nished
installing the Fleur de Lis Finial. Turn on your
fountain and enjoy!
Remember!
If you ever need help, you can
contact our customer care at:
[phone]
2

WORLDWIDE PATENTS PENDING, 2015
Yeiser Research and Development, LLC
9545 Pathway St. Santee, CA 92071
Made in China