BESAFE IZI UP User manual

www.besafe.eu
ECE R44/04 E4
universal 15-36 kg
ECE R44/04
04443713
GB
User manual
Complies with revised standard:
Tested and Approved

2
As you and we know, safety comes first when children are
involved. For that reason the iZi Up complies to the highest
safety requirements.
The shoulder belt guides and backrest will move to the
correct height and width automatically and simultaniously
when adjusting the head rest.
The iZi Up can be placed in the sleeping position, by a
simple movement. Because of the optimally engineered
belt guide system, full safety is guaranteed.
In order to maintain safety, moving upright when the child
is seated is prohibited, unless your child gets up and
takes his or her seat once more.
Thank you for choosing BeSafe iZi Up
Safety and convenience
It is important that you read this user manual BEFORE
installing your iZi Up. Incorrect installation could endanger
your child.
!

3
Only install the iZi Up with a 3-point-belt approved to
UN/ECE regulation No. 16 or other equivalent standards.
Forward facing installation only.
-
-
Contents
Vital information 3
Preparing to install 6
Installation in the car 7
Sleeping position 11
Removing the iZi Up from the car 12
Removing and refitting the cover 13
After an accident 15
Guarantee 16
Warning: Potential misuse 17
Important advice 18
Point of sale information 20
Vital information
!

4
AIRBAG
BeSafe advices that child seats should not be bought or
sold second-hand. Many seats sold through local advertising
have been found to be dangerous.
Second-hand car seats
Positioning in car:Forward facing installation:
Only forward facing
installation allowed. Allowed positions in car, only with a 3-point-belt, are
indicated green.
Advised position is on the
rear seat.
It is recommended not to use the iZi Up on a passenger
seat fitted with activated frontal airbag.
!

5
r
OK
Shoulder
belt
NO
The Besafe iZi Up can only be used with a 3-point-belt,
approved to UN/ECE regulation No. 16 or other equivalent
standards.
Important: belts
!
This is a 3-point-belt This is a 2-point belt
Lap belt

6
Preparing to install
1 Head rest
2 Cover head rest
3 Back rest
4 Cover back rest
5 Cover seat
6 Seat
7 Sleeping positioning handle
8 Shoulder belt guide
9 Base
10 Carrying handle
11 Storage user manualStorage user manual
12 Height adjusting knob
Crucial parts

7
1
2
Installation in the the car
Place the iZi Up on the car
seat.
Make sure the iZi Up is
touching the seat back
support.
The Besafe iZi Up can only be used with a 3-point-belt,
approved to UN/ECE regulation No. 16 or other equivalent
standards.
!
Let your child take place in
the iZi Up.
Make sure the belt is not twisted.
!
The lap belt should be worn over the hips.
!

8
3
4
11
8
Place the belt in the shoulder
belt guide (8). Make sure the
belt is not twisted.
Close the shoulder belt
guide (8).
Adjust the iZi Up to the
correct height (6 positions),
by turning the height
adjusting knob (11).
Place the belt in the shoulder belt guide (8).
Open the shoulder belt guide
(8) by sliding the lower part
outwards.

9
6
5
Lock the belt in the buckle, click.
Make sure that the belt
always runs from the
retractor straight over the
shoulder. The shoulder belt
should level with your child’s
shoulders. The lap belt
should be positioned over
the hips.
Remove slack by pulling the
belt toward the retractor.

10
Correct retractor position
Make sure the belt is positioned in the green zone.