Bestway P3083 User manual

S-S-006048
#P3083/#P3085
www.bestwaycorp.com
S-S-006048 / 14.0x21.0cm / P3083AU / P3085AU / 澳规内置泵说明书 / JS-YF-2016-B-17820

S-S-006048
INFLATION & DEFLATION
EXCLUSIVELY DESIGNED FOR AIR BEDS
READ CAREFULLY BEFORE OPERATING AND SAVE
THESE INSTRUCTIONS.
TO AVOID THE RISK OF ELECTRIC SHOCK, DO NOT
EXPOSE TO WATER OR RAIN.
2
DUAL FUNCTION:
NOTICE:
CAUTION:
POWER CORD COMPARTMENT
STOP DEFLATE
INFLATE
INFLATION PORT
S-S-006048 / 14.0x21.0cm / P3083AU / P3085AU / 澳规内置泵说明书 / JS-YF-2016-B-17820
1. Unplug or disconnect the appliance from the power supply before using
and servicing.
2. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
3. Motor for short time operation only. Inflate only for 5 minutes and deflate
only for 5 minutes. Make sure motor's run time at a time not exceeds 5
minutes.
4. The air vent on the cover should be kept free of debris during use.
5. Product must be stored in a dry location.
6. After use, airbeds may require additional air to increase firmness. Add air
to proper firmness.
7. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
NOTE: This product is not intended for commercial use.
NOTE: Drawings for illustration purpose only. May not reflect actual product.
Not to scale.
CLEANING & STORAGE:
1. If product gets dirty, use a clean damp cloth and wipe gently on the flocked and PVC surface.
Do not use harsh detergents to clean.Fold and store after product is dried.
2. Before storing the product, release all the air. Store in a cool and dry place.
3. Do not place sharp or heavy objects near or on top of the mattress. Doing so will cause
damage and tears.
WARNING：

S-S-006048
1.1 1.2 1.3
1.4 1.5 1.6
INFLATION
3
2.1 2.2
2.42.3
INFLATE WITH HAND PUMP（not included）
3.2
3.4
3.1
3.3 3.5
DEFLATION
MANUAL-DEFLATION
S-S-006048 / 14.0x21.0cm / P3083AU / P3085AU / 澳规内置泵说明书 / JS-YF-2016-B-17820

S-S-006048
S-S-006048 / 14.0x21.0cm / P3083AU / P3085AU / 澳规内置泵说明书 / JS-YF-2016-B-17820
For support please visit us at:
www.bestwaycorp.com/support
©2018 Bestway Inflatables & Material Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten/Tutti i diritti riservati
®™ Trademarks used in some countries under license to/
Marques ®™ utilisées dans certains pays sous la licence de/
Marcas comerciales ®™ utilizadas en algunos países bajo la licencia de/
®™ Die Warenzeichen werden in einigen Ländern verwendet unter Lizenz der/
®™ Marchi utilizzati in alcuni paesi concessi in licenza a
Bestway Inflatables & Material Corp., No.3065 Cao An Road, Shanghai, 201812, China.
Manufactured,distributed and represented in the European Union by/
Fabriqués, distribués et représentés dans l’Union Européenne par/Fabricado, distribuido y representado en la Unión Europea por/
Hergestellt, vertrieben und in der Europäischen Union vertreten von/Prodotto, distribuito e rappresentato nell'Unione Europea da
Bestway (Europe) S.r.l., Via Resistenza, 5, 20098 San Giuliano Milanese (Milano), Italy
Distributed in North America by/Distribués en Amérique du Nord par/Distribuido en Norteamérica por
Bestway (USA) Inc., 3411 E. Harbour Drive, Phoenix, Arizona 85034, United States of America
Distributed in Latin America by/Distribué en Amérique latine par/Distribuido en Latinoamérica por/Distribuído na América Latina por
Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel, Santiago, Chile
Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, 98-104 Carnarvon Street, Silverwater, NSW 2128, Australia
www.bestwaycorp.com
Made in China / Fabriqué en Chine / Fabricado en China / Hergestellt in China / Prodotto in Cina