Bestway Built-in Sidewinder P3143 User manual

1
INFLATION & DEFLATION EXCLUSIVELY DESIGNED
FOR AIR BEDS
READ CAREFULLY BEFORE OPERATING AND SAVE
THESE INSTRUCTIONS.
TO AVOID THE RISK OF ELECTRIC SHOCK, DO NOT
EXPOSE TO WATER OR RAIN.
OWNER’S MANUAL
P3143 Built-in SidewinderTM AC Electric Pump
DUAL FUNCTION:
NOTICE:
CAUTION:
FOR INDOOR USE ONLY.
HOUSEHOLD USE ONLY.
WARNING:
1. Unplug or disconnect the appliance from the power supply
before using and servicing.
2. This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way, if the plug
does not fit fully in the outlet, reverse the plug, if it still does
not fit, contact a qualified electrician. Do not attempt to defeat
this safety feature.
3. To reduce the risk of electric shock or injury, use indoors only.
4. Motor run time should not exceed 5 minutes. Operator
should allow motor to cool for 5 minutes between uses.
5. Children are strictly prohibited from operating pump.
6. The air vent on the cover should be kept free of debris during
use.
7. Product must be stored in a dry location.
8. After use, airbeds may require additional air to increase
firmness. Add air to proper firmness
9. Infants have suffocated on inflatable mattresses. Never place
infant aged birth to 15 months to sleep on this inflatable air
mattress/air bed. Infants can suffocate on an underinflated or
deflated mattress, on bedding, by co-sleeping with another
person, and by entrapment between the mattress and bed
frame or between the mattress and a vertical surface.

2
10. Children can be entrapped between the inflatable mattress
and an adjacent vertical surface. Provide at least a shoulder
width space between the inflatable mattress/airbed and
adjacent vertical surfaces such as walls, dressers, or other
objects.
11. Always keep the inflatable mattress fully inflated when in use.
NOTE: Drawings for illustration purpose only. May not reflect
actual product. Not to scale.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for
help.

3
1.1 1.2 1.3
1.4 1.5 1.6
INFLATION
2.1 2.2
2.42.3
INFLATE WITH HAND PUMP (not included)
3.2
3.4
3.1
3.3 3.5
DEFLATION
POWER CORD COMPARTMENT USB PORT STOP INFLATE
DEFLATE
INFLATION PORT

4
303021314027
Fig 1 Fig 2 Fig 3
Fig 4 Fig 5 Fig 6
CLEANING, MAINTENANCE & STORAGE:
1. If product gets dirty, use a clean damp cloth and wipe gently on the surface. Do not
use harsh detergents to clean. Fold and store after product is dried.
2. Deflate the airbed following the "DEFLATION" instructions.
3. Make sure all the air inside is removed so the bed can be folded to a minimum
size(Fig1).
4. Once deflated, fold the airbed along the longest side, beginning at the outside edge
of the mattress and folding inward toward the middle(Fig2). Make sure the
deflationvalve remains unobstructed. (Fig3)
5. When the mattress is folded lengthwise, fold in the other direction, beginning with
the foot and carefully pushing out any remaining air as you fold toward the deflation
valve.(Fig4)
6. Place the mattress in it's storage bag and store in a cool and dry location away from
chemicals and heavy or sharp objects.(Fig6)
USB port.
Specification: DC 5V 1A
The USB port can be powered when the pump plugs into the socket.
MANUAL-DEFLATION