Better Homes and Gardens 5685215WCOM User manual

B345685215WCOM
6
5685215WCOM
STOP
1-800-489-3351
Need Parts or Assistance?
WWW.AMERIWOODHOME.COM/PARTS
If a part is missing or damaged, visit our website or call our toll-free
customer service line. We will gladly ship your replacement parts
FREE of charge.
For prompt, reliable service please have your assembly manual ready.
DO NOT RETURN PRODUCT TO THE STORE
Individual stores do not stock parts.
or call toll free:
Recommended # of people needed for assembly: 2
Estimated assembly time is 2 hours.
Se localizan las traducciones españolas en el centro de este
manual.
THIS INSTRUCTION BOOKLET CONTAINS
IMPORTANT SAFETY INFORMATION. PLEASE
READ AND KEEP FOR FUTURE REFERENCE.
Date of Purchase
___ / ___ / ___
Please Recycle
Recicle Por Favor
and Gardens
®
omes
Better
H
Date of Purchase ___ / ___ / ___
Lot Number:

2
Visit www.AMERIWOOD.com to view the limited warranty valid in the U.S. and Canada.
Thank you for purchasing from AMERIWOOD.
HELPFUL HINTS
BEFORE STARTING
-Read each step carefully before starting. It is very important that each
step of instruction is performed in the correct order. If these steps are not
followed in sequence, assembly difficulties will occur.
-Make sure all parts are included. Most board parts are labeled or
stamped on the raw edge.
-Work in spacious area, preferably on a carpet, near the place the unit will
be used.
-Have the following tools close at hand.
-Do not use power tools to assemble your furniture. Power tools may strip
or damage the parts.
- Visit our website for basic assembly tips and to order replacement parts..
- Call our toll free number if you need assistance.
- Compression dowels are tapped in with a hammer.
- Back panels provide stability and support. Use all the nails provided. Units without the back panel
installed may collapse.
- When tapping nails into a board, be sure there are equal margins on all sides to square the unit.
- Move your new furniture carefully, with two people lift and carry the unit to it's new location.
- Never push, drag or scoot your furniture (especially on carpet).
- Additional parts are available for a nominal fee.
For help with assembly, identifying parts, product information or to order parts, please contact us:
AMERIWOOD
410 East First Street South
Wright City, MO 63390
Attention: Consumer Service
Write to:
USA
Visit our website: FAX:
Call us at:
(Central Time)
9:00 am - 5:00 pm
Monday - Friday
available 24 hours a day,
7 days a week
available 24 hours a day,
7 days a week
WWW.AMERIWOODHOME.COM/PARTS

B345685215WCOM
6
3 /47
www.ameriwoodhome.com
PARTS
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
LEFT PANEL
356852150101
A
RIGHT PANEL356852150201B
UPPER PARTITION356852150301C
LOWER PARTITION
356852150401D
TOP
356852150501E
BOTTOM
356852150611F
FIXED SHELF
356852150711
G
UPPER SIDE MOLDING356852150802
H
LOWER RAIL356852150902I
LEFT PANEL RAIL356852151001J
RIGHT PANEL RAIL356852151101K
UPPER FRONT MOLDING
356852151201L
CENTER MOLDING
356852151301M
LOWER SUPPORT356852151412
N
FRONT LEG356852151502O
REAR LEG356852151602P
BACK PANEL
K568500001AA
Parts shown are the base cabinet of your model. Drawers shown on next page. Please note, some parts are labeled with a sticker and some
parts have a letter stamped on a raw edge.
This piece is paperboard construction. It is not made from
wood but is required for the assembly of your unit.
A
B
C
D
E
F
G
H
H
I
I
J
K
LM
N
N
O
O
P
AA

B345685215WCOM
6
4 /47
www.ameriwoodhome.com
PARTS
Parts List
DESCRIPTIONPART NUMBERQTYITEM
DRAWER BOTTOM356853312001T
DRAWER SIDE39991120346200C2
-
DRAWER BACK
39991120055640B1
-
UPPER DRAWER FRONT
356852152511Y
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
LOWER DRAWER FRONT
356852152111U
DRAWER SIDE39991167346200C
2
-
DRAWER BACK39991167055640B1
-
DRAWER BOTTOM356853312001T
Parts shown are for the upper drawers and four lower drawers. Please note, some parts are labeled with a sticker and some parts have a
letter stamped on a raw edge.
Quantities listed are per drawer. You will have 2 upper
drawers.
Quantities listed are per drawer. You will have 4 lower
drawers.
upper drawer
lower drawer
Note: The drawer side will be labeled " DWR SIDE" and the drawer back
will be "DWR BACK". Your unit has two different size drawers. The upper
drawers will use the smaller of the two sizes.
DWR
SIDE
DWR
BACK
DWR
SIDE
T
Y
DWR
BACK
DWR
SIDE
T
DWR
SIDE
U

B345685215WCOM
6
5 /47
www.ameriwoodhome.com
PARTS
x
cam bolt
#A22610
6
20
x
8 20
#A22910
connector bolt
x
20
connector
#A22920
9
1-3/4" flat head
x
#A13410
13 4
x
#A11080
7/16" flat head
x
6011
x17 22
#A21110
nail
x
10 14
#A12810
1" pan head
right cabinet memberleft cabinet member left drawer runner right drawer runner
x
#A56750
1d1c1b
1 6
1a
x
4 1
#A84050
safety bracket kit
4a
4b
4c 4d
x
2 12
#A52480
knob
x
31
#A43105
foot
x
#A22620
cam lock
520
x
#A21660
wood dowel
712
x
#A12120
7/16" pan head
12 60
x
15 16
#A17010
3/8" machine screw
x
#A17400
8-32 x 7/8" bolt
16 8
x
20 1
#A43490
glide spacer
x
#A21970
drive fastener
14 24
x
18 4
#A54510
drawer bracket
x
19 8
#A54520
drawer bracket

B345685215WCOM
6
6 /47
www.ameriwoodhome.com
2
3½ turn to fully
lock.
½ se vuelven a
totalmente
cerradura.
4
Tighten to fully seat. Do not over
tighten.
Apriétese a totalmente asiento. No
haga encima de apriétese.
Proper orientation of cam.
La orientación apropiada de leva.
1
This illustration shows how the CAM fastening system works.
Esta ilustración muestra el sistema de fijación de leva y como funciona.
Lock
Apretar

1
B345685215WCOM
6
7 /47
www.ameriwoodhome.com
You will need to tap the connector (9) with a hammer
to fully insert. Be sure the connector is positioned as
shown before pushing into holes.
Important: When using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is
tight. Failure to do so may result in stripping the screw.
x
12
9
A
B
9
9
9
9
9
9
9
9
9
9
9
9

2
B345685215WCOM
6
8 /47
www.ameriwoodhome.com
x
812
8
O
O
P
P
You will use the larger holes in the rear legs (P) for the connector bolts (8). The rear legs (P) has holes in the front and rear surface.
8
8
8
8
8
8
8
8
88
8

3
B345685215WCOM
6
9 /47
www.ameriwoodhome.com
O
P
A
Finished Edge
Borde Acabado
Press the front and rear legs (O&P) onto the left panel (A) so the connector bolts (8) engage the connectors (9). Turn the screw in
the center of the connector (9) clockwise to lock in place.
Turn screw clockwise to lock in place.
Gire hacia la derecha el tornillo para bloquear en su lugar. End View
Vista Final
Small holes in rear surface.
Los agujeros pequeños en superficie posterior.
8
9

4
B345685215WCOM
6
10 /47
www.ameriwoodhome.com
Turn screw clockwise to lock in place.
Gire hacia la derecha el tornillo para
bloquear en su lugar.
Finished Edge
Borde Acabado
Small holes in rear surface.
Los agujeros pequeños en superficie posterior.
Press the front and rear legs (O&P) onto the right panel (B) so the connector bolts (8) engage the connectors (9). Turn the screw
in the center of the connector (9) clockwise to lock in place.
O
P
B
End View
Vista Final
9
8

5
B345685215WCOM
6
11 /47
www.ameriwoodhome.com
x
1 3
1a
x
x
911
O
A
P
1a
1a
1a
1a
11
11
11
11
11
11
11
11
11
11
Using the small pilot holes, attach the left cabinet members (1a) as
shown.

6
B345685215WCOM
6
12 /47
www.ameriwoodhome.com
O
A
x
6
5
x
71
P
7
5
6
Proper orientation of CAM LOCK
Posición correcta de la cerradura de leva.
x
52

7
B345685215WCOM
6
13 /47
www.ameriwoodhome.com
Using the small pilot holes, attach the right cabinet members (1b) as shown.
x
x
911
x
1 3
1b
11
11
11
11
11
11
11
11
11
11
1b
1b
1b
1b
B
O
P

8
B345685215WCOM
6
14 /47
www.ameriwoodhome.com
x
6
5
x
71
5
6
7
O
P
B
x
52
Proper orientation of CAM LOCK
Posición correcta de la cerradura de leva.

9
B345685215WCOM
6
15 /47
www.ameriwoodhome.com
x
10 4
Finished Edge
Borde Acabado
10
Attach the upper side molding (H) and lower rail (I) to the left panel (A) as shown with screws (10).
Be sure the bottom edge of the lower rail (I) is flush with
the bottom edge of the left panel (A).
Be sure the top edge of the upper side molding
(H) is flush with the top edge of the left panel (A).
A
A
H
H
I
I

10
B345685215WCOM
6
16 /47
www.ameriwoodhome.com
x
10 4
Attach the upper side molding (H) and lower rail (I) to the right panel (B) as shown with screws (10).
Be sure the top edge of the upper side molding (H)
is flush with the top edge of the right panel (B).
Be sure the bottom edge of the lower rail (I) is flush with
the bottom edge of the right panel (B).
Finished Edge
Borde Acabado
I
H
10
B
H
I
B

11
B345685215WCOM
6
17 /47
www.ameriwoodhome.com
x
10 3
A
J
H
I
10
Position the left panel rail (J) as shown. Attach the left panel rail (J)
to the left panel (A) with screws (10) as shown. If needed loosen
screws, make needed adjustment of rail and re-tighten.

12
B345685215WCOM
6
18 /47
www.ameriwoodhome.com
x
10 3
Position the right panel rail (k) as shown.
Attach the right panel rail (K) to the right
panel (B) with screws (10) as shown. If
needed loosen screws, make needed
adjustment of rail and re-tighten.
B
H
I
K
10

13
B345685215WCOM
6
19 /47
www.ameriwoodhome.com
x
71
x
1 1
1a
x
x
611
x
1 1
1b
Finished Edge
Borde Acabado
Finished Edge
Borde Acabado
C
C
1a
1a
1b
1b
7
7
11
11
11 11
11
11
11
11
right surface
derecho de superficie
left surface
superficie izquierda
x
52
Proper orientation of CAM LOCK
Posición correcta de la cerradura de leva.
5

14
B345685215WCOM
6
20 /47
www.ameriwoodhome.com
x
1 2
1a
x
1 2
1b
x
x
1211
right surface
derecho de superficie
left surface
superficie izquierda
11
11
11
1a
11
11
11
1a
11
11
11
11
11
11
1b
1b
1a 1b
11
11
DD
Finished Edge
Borde Acabado
Finished Edge
Borde Acabado