Better Homes and Gardens Mercer Dining Bench User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Whalen Furniture Manufacturing Page 1 Factory No. 16434
Date 2015-06-29 Rev. 1 Factory: DOSHFU
Mercer Dining Bench
Stock # BH15-022-599-03
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions
and parts list ready to provide the model name, part name or factory number:
866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenstyle.com
Or e-mail your request to [e-mail]
LOT NUMBER:
DATE PURCHASED: / /

Stock # BH15-022-599-03
Please call for replacement parts or assistance: 866-942-5362
Whalen Furniture Manufacturing Page 2 Factory No. 16434
QUALITY GUARANTEE
We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will
repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is
designed to meet your highest expectations. We guarantee that you will immediately see the value of
our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from
State to State.
Customer Service: 866-942-5362
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.whalenstyle.com
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Mercer Dining Bench (BH15-022-599-03)
MADE IN CHINA
MAXIMUM RECOMMENDED WEIGHT LOADS
THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE
MAXIMUM WEIGHTS INDICATED. USE WITH LOADS HEAVIER THAN THE
MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING
POSSIBLE INJURY.
MAXIMUM LOAD 275 lb. (124.7 kg)

Stock # BH15-022-599-03
Please call for replacement parts or assistance: 866-942-5362
Whalen Furniture Manufacturing Page 3 Factory No. 16434
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Bench Top (1)
B- Leg (2) C- Top
Stretcher (1)
(1) Ø1/4” x 5/8” Bolt (2) Small Lock Washer (3) Small Flat Washer
(4+1 extra) (4+1 extra) (4+1 extra)
(4) Ø5/16” x 2-1/2” Bolt (5) Large Lock Washer (6) Large Flat Washer
(4+1 extra) (4+1 extra) (4+1 extra)
4 mm Allen Wrench (1) 5 mm Allen Wrench (1) Touch-up Pen (1)
Tools required: Allen wrench (provided).

Stock # BH15-022-599-03
Please call for replacement parts or assistance: 866-942-5362
Whalen Furniture Manufacturing Page 4 Factory No. 16434
Assembly Instructions
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go
back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Align and attach Top Stretcher (C) between two Legs (B) by using two 5/8” Bolts (1) with the Small Lock
Washers (2) and Flat Washers (3) through the end brackets and screw into the threaded sockets on the Legs.
B
CB
1
2
3
1
2
3
Small Lock Washer
(2 used in this step)
②
Small Flat Washer
(2 used in this step)
③
Ø1/4” x 5/8” Bolt
(2 used in this step)
①

Stock # BH15-022-599-03
Please call for replacement parts or assistance: 866-942-5362
Whalen Furniture Manufacturing Page 5 Factory No. 16434
Assembly Instructions
3. Place the Bench Top (A) upside down on a level and protective surface with the threaded inserts facing up.
4. Position last assembly onto the sub-top of Bench Top (A). Insert and screw two 5/8” Bolts (1) with the
Small Washers (2 and 3) through the metal tabs and screw into the threaded inserts on the Bench Top (A).
5. Secure the top rail of Legs (B) to the Bench Top (A) by using four 2-1/2” Bolts (4) and four Large Washers
(5 and 6) as shown.
Small Lock Washer
(2 used in this step)
②
Small Flat Washer
(2 used in this step)
③
Large Lock Washer
(4 used in this step)
⑤
Large Flat Washer
(4 used in this step)
⑥
Ø5/16” x 2-1/2” Bolt
(4 used in this step)
④
Ø1/4” x 5/8” Bolt
(2 used in this step)
①
C
A
B
B
6
5
4
6
5
4
1
2
3

Stock # BH15-022-599-03
Please call for replacement parts or assistance: 866-942-5362
Whalen Furniture Manufacturing Page 6 Factory No. 16434
Assembly Instructions
6. Go back and tighten all bolts with the enclosed Allen wrench. Ask for assistance to lift the assembled Bench
upright and position it at the desired location.
7. If necessary, adjust the pre-attached floor levelers at the bottom of Legs (B) to level the unit.

Stock # BH15-022-599-03
Please call for replacement parts or assistance: 866-942-5362
Whalen Furniture Manufacturing Page 7 Factory No. 16434
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage your furniture’s finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
Stains or marks from crayons or ink markers will be difficult to remove.
In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity
changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful
tips will enhance your furniture as it ages.
A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during
assembly or shipping.
We hope you enjoy your purchase for many years.
Thank you for your purchase!

IF YOU NEED TO ORDER ANY REPLACEMENT PARTS, PLEASE USE THE LIST BELOW
Mercer Dining Bench (BH15-022-599-03)
*BH15-022-599-03-1-BT Bench Top *BH15-022-599-03-8-LLW Large Lock Washer *BH15-022-599-03-2-L Leg *BH15-022-599-03-9-SFW Small Flat Washer *BH15-022-599-03-3-FL Floor Leveler *BH15-022-599-03-10-LFW Large Flat Washer *BH15-022-599-03-4-TS Top Stretcher *BH15-022-599-03-11-M4AW 4 mm Allen Wrench *BH15-022-599-03-5-5/8B Ø1/4” x 5/8” Bolt *BH15-022-599-03-12-M5AW 5 mm Allen Wrench *BH15-022-599-03-6-2 1/2B Ø5/16” x 2-1/2” Bolt *BH15-022-599-03-13-TUP Touch-up Pen *BH15-022-599-03-7-SLW Small Lock Washer *BH15-022-599-03-CH Complete Hardware