Better Homes and Gardens Dalton Park Series User manual

Page 1 of 9
NEED HELP? For help with assembly or if you are missing a part, please visit Whalen Furniture at www.whalenstyle.com or call
1-866-942-5362 (8:30 a.m. to 4:30 p.m., PST, Monday - Friday). Or e-mail to: [email protected].
For returns, visit www.walmart.com and follow the steps to return a product.
Dalton Park 5pc Dining Set
Stock #: BH12-084-499-04
Lot Number:
Date Purchased:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
DO NOT RETURN THE PRODUCT TO THE STORE; individual stores do not stock
parts. If a part is missing or damaged, call our toll-free customer service line. We will
gladly ship your replacement parts FREE of charge.
STOP
Date 2014-09-10 Rev. 2 Factory: WOFUVI

Page 2 of 9
Dalton Park 5pc Dining Set
NEED HELP? For help with assembly or if you are missing a part, please call Whalen Furniture Mfg. Inc. 1-866-942-5362
(8:30 a.m. to 4:30 p.m., PST, Monday - Friday) or e-mail to: [email protected].
Counter Height Dining Set Parts
AB
Counter Height Dining Set Hardware
1
4
COMPONENTS
PART QTY.
ATable Top 1
BMounting Panel 2
CTable Leg 4
DShelf Frame 2
EChair Backrest 4
FCushion 4
GFront Leg Assembly 4
HSide Rail 8
ILeft Side Stretcher 4
JRight Side Stretcher 4
CD
EF
GH
IJ
2
3
5678
10
Get Ready!
We assembled every piece ourselves to make sure it’s truly easy.
●Please read all the instructions before starting.
●Carefully unpack and identify each part, component, and piece of
hardware to make sure you have everything you need for assembly.
Lay out each part on a soft, uncluttered surface.
9
HARDWARE
M6x55mm Bolt 12+1 extra
M4x25mm Screw 8+1 extra
M4x32mm Screw 16+1 extra
M4x38mm Screw 16+1 extra
Lock Washer 12+1 extra
Flat Washer 36+1 extra
Wood Dowel 2
Touch-up Pen 1
M4 Allen Wrench 2
M6x50mm Bolt 24+1 extra
1
3
4
5
6
7
8
9
2
10
Warning: Includes small
parts with sharp edges
that could be hazardous
to children.

Page 3 of 9
Dalton Park 5pc Dining Set
●Unpack the unit and confirm that you have all the hardware and required parts listed.
●Align and attach the Shelf Frames (D) to the cutouts of Table Legs (C), make certain the
aprons on Shelf Frames will face floor after assembly. Insert & screw the M6 x 55mm
Bolts (1) with Lock Washers & Flat Washers (5 & 6) through the corner blocks into the
threaded inserts in the Legs. Tighten the bolts with enclosed Allen Wrench .
NEED HELP? For help with assembly or if you are missing a part, please call Whalen Furniture Mfg. Inc. 1-866-942-5362
(8:30 a.m. to 4:30 p.m., PST, Monday - Friday) or e-mail to: [email protected].
Step 1:
HARDWARE
PART PART PART PART
M6x55mm Bolt x 8 M6 Lock Washer x 8 M6 Flat Washer x 8 Allen Wrench x 1
1569

Page 4 of 9
Dalton Park 5pc Dining Set
●Stand last assembly upright.
●Align and attach the Mounting Panels (B) onto the top of Table Legs (C) using four
M6x55mm Bolts (1) with Lock Washers & Flat Washers (5 & 6) through the countersunk
holes on Mounting Panels into the threaded inserts in Table Legs. Tightly fasten the bolts
with enclosed Allen Wrench.
NEED HELP? For help with assembly or if you are missing a part, please call Whalen Furniture Mfg. Inc. 1-866-942-5362
(8:30 a.m. to 4:30 p.m., PST, Monday - Friday) or e-mail to: [email protected].
Step 2:
HARDWARE
PART PART PART PART
M6x55mm Bolt x 4 M6 Lock Washer x 4 M6 Flat Washer x 4 Allen Wrench x 1
1569

Page 5 of 9
Dalton Park 5pc Dining Set
●Position the Table Top (A) upside down on a level & protective surface as shown.
●Insert 2 Wood Dowels (7) into the middle holes on the Table Top (A). Flip the assembled
frame upside down and position the Mounting Panels (B) onto the inserted Wood Dowels.
●Center and attach the Mounting Panels (B) to the Table Top (A) by inserting and screwing
eight M4 x 25mm Screws (2) through the pre-drilled holes on the Mounting Panels. Tightly
fasten the screws with Phillips Screwdriver.
NEED HELP? For help with assembly or if you are missing a part, please call Whalen Furniture Mfg. Inc. 1-866-942-5362
(8:30 a.m. to 4:30 p.m., PST, Monday - Friday) or e-mail to: [email protected].
Step 3:
HARDWARE
PART PART
M4 x 25mm Screw x 8 Wood Dowel x 2
27