BIBOTING BB-333 User manual

一、碧波庭、BIBOTING and H34D are trademarks of BIBOTING
International
二、Our instruments are manufactured , researched and developed in
Taiwan, China.
三、Each Registered instrument has an identical serial number.
The serial number can be checked and verify through company
hotline and website.
BIBOTING Original Authentic Statement
In order to protecting consumer rights and for your safety. "PLEASE
READ CAREFULLY" to avoid purchasing of false corn !
Shanghai BIBOTING International Institutions
Phone：[phone]
China adress：Floor 7, 930 West ZhongShan Rd, ChangNin District,
Shanghai.
Taiwan BIBOTING International Institutions
Phone：[phone]
Taiwan adress：Floor 8, 66-7 Sec. 2, Nankan Rd,
Luzhu District,Taiwan.
The number of the company in China Taiwan：
99-687589-00
Taiwan adress：83165191534
www.biboting.com
English
Safety precautions 01
Function indication instruction for products and accessories 05
Product operation 09
Product maintenance and storage 10
Troubleshooting 11
After-sales service 12
Specifications 13
BIBOTING
BIBOTING Beauty Healthcare Instrument
· Thank you for purchasing BIBOTING Beauty Healthcare
Instrument
· For your safety, please read the operation manual carefully before
start using the product, take special concern to the provided safety
precautions manual
· This manual provides users with safe and comprehensive
operating instructions. Please retain the manual after reading
for future reference.
Table of Content

· Do not use on the following parts:(can cause threat to life)
· DO NOT USE under following physical conditions :
① Breast cancer or other cancer patients
② Any injection hairdressing
③ Cardiac catheter or heart pacemaker insertion patient
④ Pregnancy
⑤ Diabetes
⑥ Any major diseases
⑦ Hypertensive patients Epileptic patients
⑧ Heart disease patients
⑨ Epileptic
⑩ Skin disease patient with skin fester, infectious inflame skin,
honeycomb lymphatitis.
⑪Keep this product away from children. (larger suction may cause danger)
⑫Surgery patient
• Keep away from children. (larger suction may cause danger)
• BIBOTING Beauty Healthcare Instrument regards as healthcare product
only without enable to replacing any medications.
• For any improper use of this instrument, the operator is fully responsible
for any cause of damage or harm up on oneself or another.
Safety precautions
Important safety precautions
For correct operation, please read and follow all the safety instructions
below before use.
(Warning) This mark indicates caution. Ignorance of this mark may
cause severe injuries or death to users.
(Attention) This mark indicates the content that the user should be
aware of .。
· Consult a doctor before using the product if you have specific
health concerns or have been diagnosed with any breast disease.
Warning
1
Do not use the machine when the environment is too dusty or too
wet. It will cause electric contacts or machine failure.
Do not use the machine when the temperature indoor is over
40℃ (104° F).
Do not place the machine anywhere that near the heater, cooker or
direct contact from sun.
Keep the machine on a flat surface when operating.
Keep away from children and pets.
This machine shall be used indoors only.
When the product removes from lower temperature place to higher
temperature, it may cause internal steam gathering. The gathering
will influence normal operation, even cause failure to accessories.
We suggest use of device after 1 hour placed within normal indoor
temperature.
When the device is not in use, please remove the power adapter from the power
plug. In addition, please remove the power adapter from the plug when the
machine is idle.
To a vo i d a c ci de nt a l d i sc ha rg e, e le ct ri c s ho ck o r i n ju r y c a u se d b y o ve rh e at in g, d o
not operate the device on or cover by pillows or blankets.
This product is not suitable for children use. To ensure the children's safety,
please ensure educate children do not regard this product as any form of toy.
Do not operate the product under the following conditions: damage of power
cord or power adapter; abnormal operation; dropped on the ground or
damage; dropped into the water. Please submit your product to maintenance
and service center for repairing.
Do not move the product by pulling the power cord. The power cord also shall
be not used as a holder.
The main body and power cord should be kept in a safe distance away from
heating surfaces.
Do not operate the product when the airflow ports are blocked. Please keep the
outlet unobstructed. The outlet shall be prevented from blocking by lint, hair.
Do not insert or drop any object into the airflow ports.
To av oi d m al fu nc ti on an d a cc id en ta l d is ch a rge , pl e as e do no t i ns er t a ny m et a l or
flammable objects into the main body of the device.
Do not use the machine outdoor.
Do not use when the area lacks of oxygen or airflow.
Before turning off the power, please turn off all the operation controlling; remove
the power adapter from plug.
Do not use on hypoesthesia or highly sensitive skins or area that lacks of blood
circulation. Keep away from children. Physical or mental disorder people must
not use by oneself.
Keep this devise away from Children and shall not allowed to clean or perform
maintenance to the machine.
Attention
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Operation Environment
•
•
•
•
•
•
•
2
① Arterial section on both sides of
your neck.
② Trachea of neck
③ Direct to Eye balls
④ Ear Pierced
⑤ Temple on both side of head
⑥ Fresh cuts and Varix
⑦ Nostril
⑧ Mouth
⑨ Anus
⑩ Urethra

For operating properly, please read the operation manual carefully before
using.
Please always use the product in the ways described by the manual.
Please consult experienced users for self-operation. Qualified staff must
accompany patient during self-operation.
Stop immediately if you feel unwell.
Always use BIBOTING Beauty & Healthcare specified essential oils, skin
care products to operate with the device, any eroded materials shall be
avoided. The unspecified materials will cause lister, popi, congestion,
blocked pores or other unknown response. The above conditions shall take
fully responsible by operator or user oneself.
The suction level is recommended to start from level 3 to 5, strengthen the
suction when you are feeling more comfortable.
If the suction is too strong, it may cause discomfort. Please adjust the
suction level to your comfort level. Use no more than 30 mins on each
Chest, belly and hip, and rest for at least 6 hrs before reuse. Use no more
than 2 mins on spots other than chest, belly and hip, move to other
position before continue using the devise.
Operating on same spot for more than 30 mins may suffer detrimental effect.
It is recommended to rest the machine for half an hour every 60 mins to
avoid overheat. Please reuse after 30 minutes.
Congestion of blood is when blood is out-flowed from the vessel into the
skin, and skin becomes purple red color. Our body has self-repair function
to repair itself in few days or weeks. The skin color will become natural
again after the congestion absorbed by physical. If there is a perceived
disease or other discomfort symptoms, please seek medical treatment
immediately.
Disinfection procedure of cups must be performed before use. When
cleaning with water, keep the machine parts away from water.
Sweat, body waste, body toxins, discomfort or itching may appear on the
skin after use. Wash the skin with water or wipe clean with water.
Stop operating the machine when any part is broken.
To avoid injury and ensure effectiveness, do not mix-use the product with
any other device.
Do not use the machine within 2 hrs after consuming food.
To avoid accident, keep away from children and pets.
There must be guardian or adult supervision if children, physical or mental
disorder people attempt to use.
For patient receiving drug or medical treatment, please consult doctor
before using.
The product shall be not used in drinking or physical discomfort.
During massage, please keep your hair or attachments (jewelry, clothing,
etc.) away from interval inside products.
Do not use the product in lightning, humid environment, both hands wet.
When the liquid was poured to product accidentally, please remove the
power cord plug from socket immediately. When both hands are wet, do
not insert or remove power cord plug.
Please do not damage the power cord, or operate in damaged power
cord. It will cause accidental electric shock or malfunction. Please contact
BIBOTING service center for further maintenance.
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
Safety instructions
3
Inapplicable operating conditions
Shutdown, unplug the power and contact Biboting Service Centre under the
following conditions:
• Accidental liquid spilt on the machine, it may result in electric shock.
• Cup, parts (such as Power cord, adjuster.) are broken. Stop immediately.
• Abnormal situation such as severe pain. Stop the operation and seek
medical advice.
• Suspicion of any abnormal or mechanical malfunction, stop the operation
immediately, and contact the service centre.
• When electric power is interrupted, sudden power resumption may
injure the user.
• Non Biboting essence or oil may cause damage to users or machine
itself. Biboting do not responsible for personal injure or repair under
such circumstance.
• If there is abnormal heating phenomenon of the instrument body,
please stop using immediately.
• In order to avoid damage, the product should not be started when the
voltage is unstable.
Product assembly and maintenance
• Please do not reform, disassembly or repair the product by yourself.
• Touching inside parts may cause failure or accidental discharge.
• The product must be repaired by BIBOTING service center.
• If user reform, disassembly and repair, customer complaints are nothing
to do with the company.
Please refer to instructions of power cord plug and power
plug, to avoid electric shock or parts failure.
• Please ensure the voltage is correct. All products can only be used with
Alternating Current (AC 100V ~ 240V)
• Do not touch the power cord when hands are wet.
• When unplugging the power cord , hold the cord holder and pull, do
not pull the cord itself.
• To avoid overheating, please ensure the power is off when idleand
keep the bottom of the instrument used in air circulation.
• Do not place heavy objects on power cord.
• Do not wind the power cord around the machine.
• Do not operate when power cord is damaged Contact Biboting Service
Centre when power cord is damaged.
• If DC line is damagedor poor contacted may cause short circuit and
then the product can not be started properly.
4

Function indicating instruction of product and accessories
5
Please read the tips when sidle using the product
1、Count down Timer
2、Continuous pressurize button (Press continuous pressurize button, press
again to stop)
3、Rhythm pressurize button (Press rhythm pressurize button, press
again to stop)
4、Air bleeding indicator light
5、Inhale indicator light
6、Negative ion indicator light
7、Air bleeding timer button (the minimum time setting is 0 second)
8、Inhale timer button (the minimum time setting is 0.1 second)
9、Magic cup DC power supply
10、Suction hole(Connect with long tube)
11、Power (on/ off)
12、Attentions for the use of the instrument
When the operation started, continuous pressurize button and rhythm
pressurize button can be pressed at the same time
If the inhale timer button and exhale time button on the rotate
panel can be adjusted on original set time, rotate of one scale is 0.1
second adjustment, continuous rotation can make continuous time
adjustment.
The minimum scale of inhale timer button can adjust to 0.1 second,
while the minimum scale of exhale timer button can adjust to 0.0
second.
When the exhale timer button adjust to 0.0 second (the minimum
scale), the instrument is in continuous inhale condition.
In the operation process, press continuous negative pressure button
or rhythm negative pressure button can change the original operation,
timer can be working when the button pressed instead of timing once
again.
After the operation, light of continuous negative pressure button or
rhythm negative pressure button will be off, the showing of reciprocal
timer is 30 minutes, the instrument is in ready mode station.
Operation method:
After press the power button for start,
the default value is:
• Whole process: 30 minutes
• Inhale frequency: 2.4 seconds
• Exhale frequency: 0.6 seconds
• Negative ion function initiate
•
•
•
•
•
•
6
①
②
④
⑦
⑥
⑧
③
①
②
③
④⑤
⑥
⑦⑧
Anion
⑨
⑩
11

Blood circulation cup manual(Developed by BIBOTING,All Right Reserved)
· A safety air releaser is installed, use when suction power exceeds your limit.
Pull the releaser up to release the air, or lower the suction power by adjusting
the airflow adjuster.
· There is a blood circulation device (vibration device) on each cup, turn the
switch clockwise to strengthen the vibration or turn left to lower the vibration
power.
· Blood circulation cups are sized 8,10,12 and 15 check the table below to find
the suitableblood circulation cup.
Bar Size Cap Size
A or B #8 30-32
B or C #10 32-34
C or D #11 34-36
D or E #15 36-38
Cup manual (Developed by BIBOTING,All Right Reserved)
① Airflow adjuster - Adjust the airflow strength by turning.
② Connect this point with short tube.
③ Blood circulation cup.
④ Vibration frequency.
⑤ power point – Power supplied blood circulation function.
⑥ Safety air releaser - Pull up to release the air.Do no connect to any tube.
⑦ Short tube - Connect to the airflow adjuster and other side connect to the cup.
7
Airflow adjuster Manual (Developed by BIBOTING,All Right Reserved)
The side ports of the airflow adjuster
These ports are used to connect with short tubes, and
the other side of tubes should connect with the blood
circulation cups.
The back port of airflow adjuster
This port is connected with the long tube, and the other
side of the long tube should connect with the suction port
on the main machine.
The sealed port
This port is sealed, do not connect with tube Connect
with tube only . For blood circulation cups use, you can
connect the unconnected short pipe to the adhesion
airflow.
Airflow adjuster knob
This knob has settings from 0-10,0 is minimum and 10
is maximum which represent the suction strength. It is
highly recommended to set at level 5 to start with.
①
②
③
④
①
②
③
④
Parts Manual (Developed by BIBOTING,All Right Reserved)
· Flat Cup / One (face) · Horn Cup / One (Private parts)
· Long tube(180 CM) / One
· DC cord (180 CM) / Two
(connect with blood circulation cups) · DC cord and Vehicle use (200 CM) / Two
·
Airflow adjuster set and
short tubes (40 CM ) / One set
●String cup/1 group (8 pcs).
8
①
②
③
④
⑤
⑥
⑦

Instruction manual (Developed by BIBOTING,All Right Reserved)
30
0
1
2
3
4
5
6
7
8
9
10
• Ensure your chest is completely clean.
• Apply essence oil first and then apply
to cream.
• Apply oil and cream from upper chest
to lower chest and all around breast
area completely.
• Connect with instrument and blood
circulation cups. Press the power
button.
• Lean the body slightly forward
then covers the breasts with
both blood circulation cups.
• Adjust the strength with the airflow
adjuster.(clockwise to strengthen the
power, anticlockwise to lower the power)
• Please start with a lower strength
until you feel comfortable.(Generally
the stronger, the more effective,
however do not exceed your limit)
• Machine will stop when time is up.
• Un-plug the power cord when idle.
• The power button can be reopened
to continue to use
• Pull the safety air releaser to remove
the blood circulation cups.
• Turn off the power to remove in emergency
Product fault elimination
· Check the power for securely
plugged into the power point.
· Check the short and long tubes
are connected to the right position,
and the airflow adjuster is set to
level 5.
· Adjust your strength from small to
large for the first time using, your
strength can’t be overstrain in
order to avoid any uncomfortable
feeling.
Step 1
Step 3
Step 5
Step 2
Step 4
9
A. Vigour Circulation Cup
Please use cleaning solution or disinfection ethanol first, and fiber towel
secondly to scrub the cup inside and outside (do not use tissue or cotton
towel) after using the product, if the black staleness rubber pin inside is
fallen off, use cotton swab with ethanol to clean the part, and then install
it to the original place.
Caution：Physical contact cup products must be cleaned and disinfected
after using to avoid cross-infection of skin, and personal hygiene products
is not recommended to be cross-used.
Product Maintenance and Storage
Storage(Developed by BIBOTING,All Right Reserved)
• Store on a flat surface when operating, do not put on any towels.
• Store in a dry area after use, avoid a wet environment and physical damage.
Place the power cord on the side of machine, metal from the power point
may damage the machine, avoid contact.
• Parts (Vibration cups, small cups, DC cord, airflow adjuster and tubes),
please store in a dry area when not using. Do not use ultraviolet rays
or high temperature steam to clean the parts.
B. Small size cups
Wipe clean with diluted alcohol.(same as above)
C. DC power cord
If the cord is stained by essence oil or cream, un-plug the cord first then
wipe clean with diluted alcohol on fibre towel. To avoid damage to the
cord, please don’t fold the cord.
D. Airflow adjuster
Set the level to 0 and place into hot water for at least 5 mins, and then
clean with cold water and leave it until dry.
E. Long(180CM)/Short tubes(40CM)
Wipe clean with diluted alcohol and fibre towel.
· Caution: Ensure hands are clean before touching the machine panel
and button. Touching the essential oil or frost will influence life and
operation of machine.
10
Parts cleaning(Developed by BIBOTING,All Right Reserved)

Situations Solutions
Cannot start, numbers
flashing, no suction.
Un-plug the DC cord from machine, start the
machineagain. If problem is fixed, the DC
cord needs to be changed.
Shaker cup on blood
circulation can not
vibrate .
① Ensure DC cord is connected to machine properly.
② Turn the adjuster on cup clockwise.
③ Change to spare DC cord, or send back for service.
④ This product is a consumable item. Do not crash
duringone year in order to affect the normal use.
Press the power button
and nothing appears on
screen.
① Restart the power.
② Replace the power outlet location test.
Send back for service if not working.
Airflow Adjuster does
not work.
Clean the airflow adjuster.
(Refer to cleaning instructions.)
Suction becomes low.
① Connect all tubes properly.
② Tubes might be broken, change to a new set.
③ Clean the tubes.(Refer to cleaning instructions)
④ Main machine suction hole is blocked.(Refer to
cleaning instructions)
⑤ Black rubber cap needs to be checked.
11
Troubleshooting (Developed by BIBOTING,All Right Reserved)
• When experience any problem, please refer to the following solutions to
resolve the problems. If the solution is not helpful, please shut down and
remove the plug, then contact Biboting Service Centre immediately.
• Users should not disassemble the BIBOTING Beauty
Healthcare Instrument. Self disassembly will invalidate the
product warranty.
After-sales service
Warranty clauses (Developed by BIBOTING,All Right Reserved)
Under normal operating conditions, the following non-accidental failure is
covered by warranty:
• Main machine has a 3 years guarantee, and 20 years warranty.
• For pipeline and cup, these accessaries can be changed within 30 days of
warranty only.
• Warranty and Guarantee period commences from purchase date, and will not
restart after service or replacement.
• For products purchased after 3 years (within 20 years), when operated under
normal conditions, Biboting will charge a repair service fee depend on parts.
Repair process
① Please enter into the after-sales service website (http://service.biboting.
com) for the maintenance of the product.
② Please keep the product well packed and return to the following address.
③ Please be sent to Shanghai China if you are in China, otherwise sent
to China Taiwan.
Scan the code to enter into the after-sales website.
Repair address
• Shanghai BIBOTING International Institutions
Phone : [phone]
China repair address : Floor 7, 930 West Zhongshan Rd, Changnin District,
Shanghai
• Taiwan BIBOTING International CO., LTD
Phone :[phone]
Taiwan repair address : Floor 8, 66-7 Sec. 2, Nankan Rd, Luzhu District, Taiwan
Postage
Please consult the local service center and take the local warranties as
principle treaty.
12

Free statement
• The physical reaction caused by products not produced by our company has
nothing to do with us.
• The company's products are without any ill effect and do not induce disease,
if feeling unwell, please consult to professional medical organization.
• claims that products are from Be Boting, our company reserves the power to
legal recourse.
Specification
Product name: BIBOTING Beauty Healthcare Instrument
Product model: BB-333
Voltage: 100V-240VAC
Power consumption: 25W
Output: DC12WTALWAN, CHINA
Dimension: Approx.270(L)×130(W) ×180(H)mm
Ner weight: Approx.2.5kg
Place of origin: China Taiwan
13