BIGBIG WON GALE User manual

产品手册 / 取扱説明書
PRODUCT MANUAL
Wireless Game Controller
GALE

CABLE
2.4G ADAPTER
Menu
RT
RB
A/B/X/Y
Right joystick
RS
M2
M4
FN
D-pad
LT
LB
HOME
Screenshot
View
LS
Left joystick
M1
M3
NAME OF EACH PART

GALE WIRELESS CONTROLLER
The PC Tool allows you to customize the controller's parameters in real time, upgrade its firmware, and more. After
downloading the PC Tool, you can unlock more new features of the controller, including adjusting joystick dead
zones, visually editing macros, adjusting parameters that simulate motion control, toggling the rate of return,
adjusting vibration, and more.
PC TOOL Download：https://www.bigbigwon.com/support/controller/gale-app/
Press HOME button for 2 seconds to turn on/off the controller.
TURN ON/OFF
There are three connection methods for this controllers, 2.4G connection/Bluetooth connection/wired connection.
IThe connection methods are described as follows:
2.4G connection:
1. With the controller turned on, press and hold the pairing button on the back of the controller for 3 seconds; the
indicator light on the home button will flash to indicate that it is in the pairing mode.
CONNECTION
Gale Wireless Controller *1 / 2.4G Adapter *1 / User Manual *1 / After-sales Card *1
Qualified Certification *1 / USB Cable *1
Switch / win10/11 / Android / iOS
IN-THE-BOX
SUPPORTED
PLATFORM

The controller supports two modes: Xinput and Switch. Before connecting, you need to switch to the
corresponding mode in order to use it.
1. Press and hold the B+HOME button for 2 seconds until the HOME indicator turns green to switch to Xinput
mode.
2. Press and hold the A+HOME button for 2 seconds until the HOME light turns red to switch to Switch mode.
Note: Bluetooth connection between iOS and Android platforms must be switched to Xinput mode first.
MODE SWITCH
2. Plug the adapter into your computer and press and hold the pairing button on the adapter for 3 seconds; the
adapter light will flash rapidly to indicate that it is in pairing mode.
3. After waiting for a few seconds, the controller HOME button indicator and the adapter's indicator light will be
always on, which indicates successful pairing.
Bluetooth connection:
1. With the controller turned on, press and hold the pairing button on the back of the controller for 3 seconds; the
HOME button's indicator light will flash rapidly to indicate that the controller is in pairing mode.
2. Search for the controller's signal on the computer side and click Connect (Bluetooth name is Xbox Wireless
Controller when the controller is in xinput mode, or Pro Controller when the controller is in Switch mode).
3. When the indicator light of the controller's HOME button is always on, it indicates that pairing is complete.
Wired connection: With the controller turned on, use the Type-C cable to connect the controller to the console.
Note: The controller is compatible with Switch and Xinput modes. Xinput is the default mode. If you have a wired
connection to the Switch, turn on “Settings-Controllers & Sensors -Pro Controller wired communication”

The controller is equipped with four remappable additional buttons and compatible with button mapping settings.
The settings are as follows:
Set Mapping:
1. Press and hold FN + (M1/M2/M3/M4) for 2 seconds, and the indicator of the FN button will begin to display
orange, indicating that it is in mapping mode;
2. Press the button on the front of the controller to be mapped to M1/M2/M3/M4 again and the FN indicator will
double flash orange to indicate that the mapping is complete.
Clear Mapping: Long press the "Button to be unmapped (M1/M2/M3/M4)" and double click the FN, the FN
indicator will blink orange to indicate that the button's mapping has been cleared.
PC Tool: The shortcut setting only supports mapping the value of the controller's buttons to the back buttons
(M1/M2/M3/M4), but you can modify all the buttons of the controller with the PC tool.
MAPPING
This controller supports setting turbo, and the supported buttons include A/B/X/Y/LT/RT/LB/RB a total of eight
buttons, and the setting methods are as follows:
Setting Turbos: Press and hold FN + "button to be set", the FN indicator will flash orange, which means it is turned
on successfully. When the turbo is triggered, the FN indicator will flash according to the turbo frequency.
Clear Turbo: Press and hold the "button to cancel turbo", double click FN, the FN indicator light will flash orange, it
means the turbo setting of this button has been cleared.
Turbo Frequency: Press and hold FN + ←to cycle between 5/s, 10/s and 20/s, default is 5/s.
TURBO

The default setting of this controller has a certain amount of joystick dead zone, users who have the need for 0 dead
zone can press FN + press down left OR right joysticks (LS/RS) to switch the 0/10 dead zone of the left and right
joysticks respectively.
Note: If the joystick has 0 deadzone, it means higher control precision, but it will also lead to joystick drift in games
with no deadzone.
PC Tool: With the PC tool, you can make more settings for the dead zone of the joystick, and it also supports
settings such as joystick curve, dead zone compensation, and so on.
DEADZONE OF JOYSTICK
When the joystick drifts severely, cannot be pushed to the maximum value, the trigger fires automatically, or the
trigger fails to reach the maximum linear value, you can try to calibrate the joystick and trigger as follows:
1. Press and hold the View button + Menu button for 3 seconds, the HOME button indicator light breathes white,
which means it is in calibration mode.
2. Push the joystick to the maximum value and turn in a circle at an even speed, repeat 3-5 times.
3. Press LT/RT to the maximum value and release, repeat 3-5 times.
4. Finally, press View + Menu at the same time, the HOME indicator will blink white to indicate that the calibration
is complete.
NOTE: Joystick Trigger Calibration is a complete set of calibration steps and all of the above steps must be
strictly completed or the calibration will fail.
JOYSTICK TRIGGER CALIBRATION
PC Tool: The shortcut setting only supports turbo setting for the eight buttons A/B/X/Y/LT/RT/LB/RB. After
downloading the PC Tool, you can set the turbo setting for all buttons of the controller.

When the controller's gyroscope drifts, you can try to calibrate the gyroscope as follows:
1. Place the controller horizontally on the desktop and press the Menu and Screenshot button at the same time,
the HOME button indicator will breathe purple, which means it enters the calibration mode.
2. Wait for a few moments for the HOME button indicator to double flash in purple, which means the calibration is
complete.
GYROSCOPE CALIBRATION
The vibration motor can be turned on and off by pressing FN + →.
PC Tool: The shortcut settings only control the vibration on and off. After downloading the PC Tool, you can also
adjust the start/maximum intensity of the vibration by using it.
VIBRATION CONTROL
In Xinput mode, you can adjust the volume of the PC by pressing FN + ↑/ ↓.
(PC volume adjustment is only supported in Xinput mode)
VOLUME ADJUSTMENT
PC Tools: The joystick supports Joystick Dynamic Calibration, which can be turned on or off from within PC Tools.
This feature can be turned on or off in the PC tool. When this feature is turned on, the joystick is calibrated in
real-time by comparing the center point of each joystick return; joysticks equipped with this technology can
achieve relatively equal amount of drift in all directions, up, down, left, right, and left.
(0 dead zone joysticks have physical drift that cannot be avoided).

1. In Xinput mode, click the Screenshot button to take a screenshot of your PC, and the file will be saved in the folder
"PC - Photos - Screenshots".
2. In Switch mode, click the Screenshot button to take a screenshot of your Switch.
SCREENSHOT
1. When the power is too low, the HOME button indicator light will flash orange 5 times at a frequency of 2 times per
second, cycling once every 30 seconds.
2. When connected to the power supply, the HOME button indicator light will breathe orange, representing the
charging state, when the battery is full, the charging light effect is off.
BATTERY
1. When the controller is put back to the charging stand, it will automatically turn off and enter the charging state.
During the charging process, the charging stand indicator light will be orange (when the controller is charging, the
HOME indicator light will also be orange), and it will turn off automatically when it is full.
2. When the controller is picked up from the charging stand, it will automatically turn on and enter back to the
connection state.
CHARGING STAND

If the controller is misconfigured or functions abnormally, you can try to reset the controller to recover, the operation
is as follows:
Long press the HOME button for 10s until the controller vibrates, which means the controller is finished resetting.
RESET
12-month limited warranty from the date of purchase.
WARRANTY

WELCOME TO THE BIGBIGWON COMMUNITY
The BIGBIG WON community is built to connect those who seek the winning edge. Join us Discord and
Follow our social channels for the latest offerings, exclusive event coverage, and opportunities to score
BIGBIG WON hardware.
BIGBIG WON DISCORD
@BIGBIG WON