Billion BIPAC 7100G User manual

BIPAC 7100SG/7100G
802.11g ADSL Router
Quick Start Guide

Billion BIPAC 7100SG/7100G 802.11g ADSL Router
1
Package Contents
Billion BIPAC 7100SG/7100GADSL Router
CD-ROM containing the online manual
RJ-11 ADSL/telephone Cable
Ethernet (CAT-5 LAN) Cable
AC-DC power adapter (12VDC, 1A)
This Quick Start Guide
 Do not use the BIPAC 7100SG/7100G in high humidity or high
temperatures.
 Do not use the same power source for the BIPAC
7100SG/7100G as other equipment.
 Do not open or repair the case yourself. If the BIPAC
7100SG/7100G is too hot, turn off the power immediately and
have it repaired at a qualified service center.
 Avoid using this product and all accessories outdoors.
Warning
 Place the BIPAC 7100SG/7100G on a stable surface.
 Only use the power adapter that comes with the package. Using
a different voltage rating power adaptor may damage the router.
A
ttention
For more detailed instructions on configuring and using
the 802.11g ADSL Router, please refer to the on-line
manual.

Quick Start Guide
2
The Front LEDs
 7100SG
LED Meaning
1 PWR Lit green when power adapter is connected.
2 SYS When lit, it indicates that the device is working properly.
3 WLAN Lit green when the wireless connection is established.
Flashes when sending/receiving data.
4 LAN Lit green when the LAN link is connected.
5 ADSL When lit, it indicates that the ADSL (Line) port is connected
to the DSLAM and working properly.
1
2
3
5
4

Billion BIPAC 7100SG/7100G 802.11g ADSL Router
3
 7100G
LED Meaning
1 PWR Lit green when power adapter is connected.
2 SYS When lit, it indicates that the device is working properly.
3 WLAN Lit green when the wireless connection is established.
Flashes when sending/receiving data.
LAN1 Lit green when the LAN1 link is connected.
LAN2 Lit green when the LAN2 link is connected.
LAN3 Lit green when the LAN3 link is connected.
4
LAN4 Lit green when the LAN4 link is connected.
5 ADSL When lit, it indicates that the ADSL (Line) port is connected
to the DSLAM and working properly.
5
4
3
2
1

Quick Start Guide
4
The Rear Ports
Port Meaning
1 Power Switch Power ON/OFF switch
2 PWR Connect the supplied power adapter to this jack.
3 RESET
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password)
4 LAN Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to the LAN ports
when connecting to a PC or an office/home network of 10Mbps or
100Mbps.
5 LINE Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
4
BIPAC 7100G has 4 LAN ports, and each of them has the
same function as that of 7100SG.
1
2
3
5

Billion BIPAC 7100SG/7100G 802.11g ADSL Router
5
Connecting Your ADSL Router
1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.
2. Power on the device.
3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.

Quick Start Guide
6
 7100SG
 7100G

Billion BIPAC 7100SG/7100G 802.11g ADSL Router
7
Configuring PC in Windows XP
1. Go to Start / Control Panel (in Classic
View). In the Control Panel, double-click on
Network Connections
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window, click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.

Quick Start Guide
8
Configuring PC in Windows 2000
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
Dial-up Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.