Billion BiPAC 645 User manual

BIPAC-645
DSL/Cable Router Plus ISDN Router
With 4-Port 10/100M LAN Switch
Quick Start Guide

Quick Start Guide
1
Package Contents
1. BIPAC-645
2. AC Power Adapter (9V 1Amp)
3. RS-232 cable (Null modem type)
4. RJ-45 ISDN cable
5. RJ-45 LAN cable
6. CD containing the online manual
7. This Quick Start Guide
The Front Panel LEDs
LED Meaning
1 Power Lit when AC power is connected.
2 LAN 1-4 /
ACT/COL
Lit Green when connected to a LAN device.
Flashes Green when sending/receiving data.
Flashes Yellow when collisions happen.
3 WAN /
ACT/COL
Lit Green when connected to a WAN device.
Flashes Green when sending/receiving data.
Flashes Yellow when collisions happen.
4 PPP Lit when PPPoE connection is activated.
5 ISDN / SYNC Lit when ISDN Layer 1 is activated.
6 ISDN / B1/B2
Lit Green when B1 channel is activated.
Lit Yellow when B2 channel is activated.
Lit Green +Yellow when B1 and B2 channels
are activated.

BIPAC-645 DSL/Cable Router plus ISDN Router
2
The Rear Ports
Power
(jack) Connect the supplied power adapter to this jack.
Console
(port) Connect the supplied RS-232 cable to this port when connecting to a PC’s RS-232 port (9-pin serial port).
ISDN So
(RJ-45
connector)
Connect an RJ-45 cable to this port when connecting
to the ISDN.
LAN 1-4
(RJ-45
connector)
Connect an UTP Ethernet cable to this port when
connecting to a LAN such as an office or home
network.
WAN
(RJ-45
connector)
Connect an UTP Ethernet cable to this port when
connecting to the Internet or making other WAN
connections.
Connecting the BIPAC-645
1. Connect the BIPAC-645 to a LAN (Local Area Network)
and the WAN or ISDN.
2. Power on the device.
3. Ensure the Power and LAN LEDs are lit.

Quick Start Guide
3
For more detailed instructions on configuring
and using the device, please refer to the on-line
manual.

BIPAC-645 DSL/Cable Router plus ISDN Router
4
Configuring PC in Windows 95/98/ME
1. Go to Start / Settings /
Control Panel. In the
Control Panel
double-click on Network
and choose the
Configuration tab.
2. Select TCP/IP ->
NE2000 Compatible, or
any Network Interface
Card (NIC) in your PC.
Then click Properties.
3. Select the Obtain an IP
address automatically
radio button.

Quick Start Guide
5
4. Then select the DNS
Configuration tab.
5. Select the Disable DNS
radio button and click
OK to finish the
configuration.
Configuring PC in Windows NT4.0
1. Go to Start / Settings /
Control Panel. In the
Control Panel double
click on Network and
choose the Protocols tab.
2. Select TCP/IP Protocol
and click Properties.

BIPAC-645 DSL/Cable Router plus ISDN Router
6
3. Select the Obtain an IP
address from a DHCP
server radio button and
click OK.
Configuring PC in Windows 2000
1. Go to Start / Settings /
Control Panel. In the
Control Panel
double-click on Network
and Dial-up
Connections.
2. Double-click Local Area
Connection.

Quick Start Guide
7
3. In the Local Area
Connection Status
window click
Properties.
4. Select Internet Protocol
(TCP/IP) and click
Properties.

BIPAC-645 DSL/Cable Router plus ISDN Router
8
5. Select the Obtain an IP
address automatically
and the Obtain DNS
server address
automatically radio
buttons.
6. Click OK to finish the
configuration.
Configuring PC in Windows XP
1. Go to Start / Control
Panel (in Classic
View). In the Control
Panel, double-click on
Network Connections.
2. Double-click Local
Area Connection.

Quick Start Guide
9
3. In the Local Area
Connection Status
window, click
Properties.
4. Select Internet
Protocol (TCP/IP) and
click Properties.