Billion BiPAC 7300 RA User manual

BiPAC 7300(G) RA
(802.11g) ADSL2+Firewall Router with
EZSO and QoS
User Manual
Version released: 1.11（1.07）
Last revised date: 03-09-2010

Table of Contents
Chapter 1...................................................................................1
1.1Introducing the BiPAC 7300(G) RA........................... 1
1.2 Features....................................................................3
1.3.1 Applications of the BiPAC 7300G RA............... 6
1.3.2 Applications of the BiPAC 7300 RA.................. 6
Chapter 2...................................................................................7
2.1 Important Notes ........................................................ 7
2.2 Package Contents.....................................................7
2.3.1 The Front LEDs 7300G RA .............................. 8
2.3.2 The Front LEDs 7300 RA................................. 9
2.4.1 The Rear Ports 7300G RA ............................. 10
2.4.2 The Rear Ports 7300 RA.................................11
2.5 Cabling....................................................................13
Chapter 3.................................................................................14
3.1 Before Configuration...............................................14
3.1.1 Configuring a PC in Windows 7...................... 15
3.1.2 Configuring a PC in Windows XP................... 17
3.1.3 Configuring a PC in Windows 2000................ 18
3.1.4 Configuring PC in Windows 98/Me................. 19
3.1.5 Configuring PC in Windows NT4.0................. 20
3.2 Factory Default Settings .........................................21
3.3 LAN and WAN PortAddresses............................... 22
3.4 Information from your ISP....................................... 22
3.5 Configuring with your BiPAC 7300(G) RA .............. 23
3.5.1 Easy Sign On .................................................23
3.5.2 Web Configuration.......................................... 26
Chapter 4.................................................................................27
4.1 Status...................................................................... 28
4.2 Quick Start..............................................................29
4.3 WAN........................................................................ 30
4.4 WLAN .....................................................................31
Chapter 5.................................................................................35

5.1 Status...................................................................... 36
5.1.1 ADSL Status ................................................... 38
5.1.2 ARP Table.......................................................39
5.1.3 DHCP Table....................................................39
5.1.4 System Log ....................................................40
5.1.5 Firewall Log....................................................40
5.1.6 UPnP Portmap ...............................................41
5.2 Quick Start..............................................................42
5.3 Configuration .......................................................... 43
5.3.1 LAN (Local Area Network).............................. 43
5.3.2 WAN (Wide Area Network)............................. 53
5.3.3 System ........................................................... 60
5.3.4 Firewall........................................................... 65
5.3.5 QoS (Quality of Service)................................. 75
5.3.6 Virtual Server.................................................. 81
5.3.7 Wake on LAN .................................................87
5.3.8 Time Schedule................................................ 88
5.3.9 Advanced........................................................ 89
5.4 Save Configuration to Flash ................................. 105
5.5 Restart ..................................................................105
5.6 Logout...................................................................106
Chapter 6...............................................................................107
Problems starting up the router............................. 107
Problems with the WAN Interface.......................... 108
Problems with the LAN Interface........................... 109
APPENDIX..............................................................................110

1
Chapter 1
Introduction
1.1Introducing the BiPAC 7300(G) RA
Thank you for purchasing the BiPAC 7300(G) RA Router. Your new router is an all-in-one
unit that combines an ADSL modem, ADSL2/2+ router and Ethernet network switch to
provide everything you need to get the machines on your network connected to the Internet
over an ADSL broadband connection.
The BiPAC 7300(G) RA router complies with ADSL2+ standards for deployment worldwide
and supports downstream rates of up to 24 Mbps and upstream rates of up to 1 Mbps.
Designed for small office, home office and residential users, the router enables even faster
Internet connections. You can enjoy ADSL services and broadband multimedia applications
such as interactive gaming, video streaming and real-time audio much easier and faster
than ever before.
The BiPAC 7300(G) RA supports PPPoA (RFC 2364 - PPP (Point-to-Point Protocol) over
ATM Adaptation Layer 5), RFC 1483 encapsulation over ATM (bridged or routed), PPP over
Ethernet (RFC 2516) to establish a connection with your ISP. Your new router also supports
VC-based and LLC-based multiplexing.
The perfect solution for connecting a small group of PCs to a high-speed broadband
Internet connection, the BiPAC 7300(G) RA allows multiple users to have high-speed
Internet access simultaneously.
Your new router also serves as an Internet firewall, protecting your network from access by
outside users. Not only does it provide a natural firewall function with Network Address
Translation (NAT), it also provides rich firewall features to secure your network. All incoming
data packets are monitored and filtered. You can also configure your new router to block
internal users from accessing the Internet.

2
The BiPAC 7300(G) RA provides two levels of security support. First, it masks LAN IP
addresses making them invisible to outside users on the Internet, so it is much more difficult
for a hacker to target a machine on your network. Second, it can block and redirect certain
ports to limit the services that outside users can access. To ensure that games and other
Internet applications run properly, you can open specific ports for outside users to access
internal services on your network.
The Integrated DHCP (Dynamic Host Control Protocol) client and server services allow
multiple users to get IP addresses automatically when the router boots up. Simply set local
machines as a DHCP client to accept a dynamically assigned IP address from the DHCP
server and reboot. Each time a local machine is powered up; the router recognizes it and
assigns an IP address to instantly connect it to theLAN.
For advanced users, Virtual Service (port mapping) functions allow the product to provide
limited visibility to local machines with specific services for outside users. For instance, a
dedicated web server can be connected to the Internet via the router and then incoming
requests for web pages that are received by the router can be rerouted to your dedicated
local web server, even though the server now has a different IP address.
Virtual Server can also be used to re-task services to multiple servers. For instance, you
can set the router to allow separated FTP, Web, and Multiplayer game servers to share the
same Internet-visible IP address while still protecting the servers and LAN users from
hackers.

3
1.2 Features
Express Internet Access – ADSL2/2+ capable
The BiPAC 7300(G) RA complies with ADSL worldwide standards. Supporting downstream
rates of 8Mbps with ADSL, the router is capable of up to 12/24 Mbps with ADSL2/2+, and
upstream rates of up to 1 Mbps. Users enjoy not only high-speed ADSL services but also
broadband multimedia applications such as interactive gaming, video streaming and
real-time audio which are easier and faster than ever. The router is compliant with
Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (ITU G.992.1); G.hs (ITU G994.1);
G.dmt.bis (ITU G.992.3); and G.dmt. bisplus (ITU G.992.5)
802.11g Wireless AP with WPA Support
With integrated 802.11g Wireless Access Point in the router, the device offers a quick and
easy access among wired network, wireless network and broadband connection (ADSL)
with single device simplicity, and as a result, mobility to the users. In addition to 54 Mbps
802.11g data rate, it also interoperates backward with existing 802.11b equipment. The
Wi-Fi Protected Access (WPA) and Wired Equivalent Privacy (WEP) supported features
enhance the security level of data protection and access control via Wireless LAN.
Fast Ethernet Switch
A 4-port 10/100Mbps fast Ethernet switch is built-in with automatic switching between MDI
and MDI-X for 10Base-T and 100Base-TX ports, with auto detection allowing you to use
either straight or cross-over Ethernet cables.
Multi-Protocol to Establish a Connection
The router supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483
encapsulation over ATM (bridged or routed), PPP over Ethernet (RFC 2516) to establish a
connection with an ISP. The router also supports VC-based and LLC-based multiplexing.
Universal Plug and Play (UPnP) and UPnP NAT Traversal
This protocol is used to enable simple and robust connectivity among stand-alone devices
and PCs from many different vendors, and it makes setting up a network simple and
affordable. UPnP architecture leverages TCP/IP and the Web to enable proximity
networking in addition to control and data transfer among networked devices. With this
feature enabled, you can seamlessly connect to Net Meeting or MSN Messenger.

4
Network Address Translation
Network Address Translation (NAT) allows multiple users to access outside resources such
as the Internet simultaneously with one IP address/one Internet access account. Many
application layer gateways (ALG) are supported such as web browser, ICQ, FTP, Telnet,
E-mail, News, Net2phone, Ping, NetMeeting, IP phone and others.
Firewall
NAT technology supports simple firewalls and provides options for blocking access from
the Internet, like Telnet, FTP, TFTP, WEB, SNMP and IGMP.
Domain Name System Relay
Domain Name System (DNS) relay provides an easy way to map a domain name with a
user-friendly name such as www.google.com with an IP address. When a local machine
sets its DNS server to the router’s IP address, every DNS conversion request packet from
the PC to this router is forwarded to the real DNS on the outside network.
Dynamic Domain Name System (DDNS)
The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname.
This dynamic IP address is the WAN IP address. To use the service, you must first apply for
an account from a DDNS service such as http://www.dyndns.org/.
PPP over Ethernet (PPPoE)
The BiPAC 7300(G) RA provides an embedded PPPoE client function to establish a
connection. You get greater access speed without changing the operation concept, while
sharing the same ISP account and paying for one access account. No PPPoE client
software is required for the local computer. Automatic Reconnect and Disconnect Timeout
(Idle Timer) functions are also provided.
Quality of Service (QoS)
QoS gives you full control over which types of outgoing data traffic should be given priority
by the router, ensuring important data like gaming packets, customer information, or
management information move through the router ay lightning speed, even under heavy
load. The QoS features are configurable by Internal IP address, External IP address,
protocol, and port. You can throttle the speed at which different types of outgoing data pass
through the router, to ensure P2P users don’t saturate upload bandwidth, or office browsing
doesn’t bring client web serving to a halt. In addition, or alternatively, you can simply

5
change the priority of different types of upload data and let the router sort out the actual
speeds.
Virtual Server:
You can specify which services are visible to outside users. The router detects an incoming
service request and forwards it to the specific local computer for handling. For example,
you can assign a PC in a LAN to act as a Web server inside and expose it to the outside
network. Outside users can browse inside the web server directly while it is protected by
NAT. A DMZ host setting is also provided for local computers exposed to the outside
Internet network.
Dynamic Host Configuration Protocol (DHCP) Client and Server
On a WAN site, the DHCP client obtains an IP address from the Internet Service Provider
(ISP) automatically. On a LAN site, the DHCP server allocates a range of client IP
addresses, including subnet masks and DNS IP addresses and distributes them to local
computers. This provides an easy way to manage the local IP network.
Rich Packet Filtering
This feature filters the packet based on IP addresses as well as Port numbers. Filtering
packets to and from the Internet provides a higher level of security control.
Web-based GUI
A web-based GUI offers easy configuration and management. It also supports remote
management capability for remote users to configure and manage this product.
Firmware Upgradeable
You can upgrade the router with the latest firmware through its web-based GUI.

6
1.3.1 Applications of the BiPAC 7300G RA
1.3.2 Applications of the BiPAC 7300 RA

7
Chapter 2
Product Overview
Standards-Based Technology (wireless router only)
The BiPAC 7300(G) RA Wireless Router utilizes the 802.11g standard. The IEEE 802.11g
standard is an extension of the 802.11b standard. It increases the data rate up to 54Mbps*
within the 2.4GHz band, utilizing OFDM technology. This means that in most environments,
within the specified range of this device, you will be able to transfer large files quickly or
even watch a movie in MPEG format over your network without noticeable delays. This
technology works by transmitting high-speed digital data over a radio wave utilizing OFDM
(Orthogonal Frequency Division Multiplexing) technology. OFDM works by splitting the
radio signal into multiple smaller sub-signals that are then transmitted simultaneously at
different frequencies to the receiver. OFDM reduces the amount of crosstalk (interference)
in signal transmissions.
The BiPAC 7300(G) RA is backwards compatible with 802.11b devices. This means that if
you have an existing 802.11b network, the devices in that network will be compatible with
802.11g devices at speeds of up to 11Mbps in the 2.4GHz range.
Installation Considerations (wireless router only)
The BiPAC 7300(G) RA Wireless Router lets you access your network, using a wireless
connection, from virtually anywhere within its operating range. Keep in mind, however, that
the number, thickness and location of walls, ceilings, or other objects that the wireless
signals must pass.
Keep the number of walls and ceilings between the BiPAC 7300(G) RA and other network
devices to a minimum - each wall or ceiling can reduce your BiPAC 7300(G) RA wireless
product’s range from 3-90 feet (1-30 meters.)
Position your devices so that the number of walls or ceilings is minimized. Be aware of the
direct line between network devices. Position the devices so that the signal will travel
straight through a wall or ceiling (instead of at an angle) for better reception. Building
Materials can impede the wireless signal - a solid metal door or aluminium studs may have