Billion myGuard 7500GL User manual

myGuard 7500GL
802.11g Security ADSL Router
Quick Start Guide

myGuard 802.11g Security ADSL Router
Introduction
In light of emerging threats of Viruses and growing demands for URL filtering from home users,
Billion designs myGuardTM 802.11g Security ADSL Router, with central control and central
guarding, to help identify vulnerabilities and protect PCs and networks while constant connected
to the Internet. Billion’s myGuardintegrates Security Service powered by Trend Micro includes
Anti-Virus, Anti-Spam, Security Scan and Dynamic Parental Control Service (60-day trial free),
in addition to security features of VPN, Firewall and Wi-Fi Protected Access. Simply connect
computer(s) to Billion’s myGuard Security ADSL Router and launch broadband access, Billion’s
myGuard Security ADSL Router will guard users’ home network and their PC. Security Services
also address parents’ concerns of children going to inappropriate websites. In the meantime,
users still enjoy the freedom of using Wireless WLAN technology.
Package Contents
myGuard 802.11g Security ADSL Router
CD with the user’s manual in PDF format, router’s application, and Trend Micro Internet
Security software. (For downloading Trend Micro Internet Security software, please
read details on page 11)*
RJ-11 ADSL/telephone Cable
Ethernet (CAT-5 LAN) Cable
Console (PS2-RS232) Cable
AC-DC power adapter (12V DC, 1A)
External Antenna
This Quick Start Guide
Warning
 Do not use this router in high humidity or high temperature.
 Do not use the same power source for this router as othe
r
equipment.
 Do not open or repair the case yourself. If this router is too hot, turn
off the power immediately and have it repaired at a qualified service
center.
 Avoid using this product and all accessories outdoors.
 Place this router on a stable surface.
 Only use the power adapter that comes with the package. Using
a different voltage rating power adaptor may damage the router.
A
ttention
1

Quick Start Guide
The Front LEDs
LED Meaning
1 PWR Lit when power is ON.
2 SYS Lit when the system is ready.
3 LAN port 1 Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps
Blinking when data is transmitted/received.
4 LAN port 2 Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps
Blinking when data is transmitted/received.
5 LAN port 3 Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps
Blinking when data is transmitted/received.
6 LAN port 4 Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps
Blinking when data is transmitted/received.
7 WLAN Lit green when the wireless connection is established. Flashes
when sending/receiving data.
10 MAIL Flash when there is Email in your configured Email account.
11 PPP Lit when there is a PPPoA / PPPoE connection.
13 ADSL Lit when successfully connected to an ADSL DSLAM (“linesync”).
2

myGuard 802.11g Security ADSL Router
The Rear Ports
6
5
4
3
2
1
Port Meaning
1 LINE Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
2 CONSOLE Connect a PS2/RS-232 cable to this port when connecting to a
PC’s RS-232 port (9-pin serial port).
3 LAN
1X — 4X
(RJ-45 connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
4
RESET
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you cannot login to the router. E.g. forgot the password)
5 PWR Connect the supplied power adapter to this jack.
6 Power Switch Power ON/OFF switch
3

Quick Start Guide
Connecting Your ADSL Router
1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.
2. Power on the device.
3. Make sure the PWR, SYS and WLAN LEDs are lit steadily and that the relevant LAN LED
is lit.
4

myGuard 802.11g Security ADSL Router
Configuring PC in Windows XP
1. Go to Start / Control Panel (in Classic View).
In the Control Panel, double-click on Network
Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window, click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
5

Quick Start Guide
Configuring PC in Windows 2000
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
Dial-up Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status window
click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
6

myGuard 802.11g Security ADSL Router
Configuring PC in Windows 98/Me
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
choose the Configuration tab.
2. Select TCP/IP ->
NE2000 Compatible, or the name of your
Network Interface Card (NIC) in your PC.
3. Select the Obtain an IP address
automatically radio button.
4. Then select the DNS Configuration tab.
5. Select the Disable DNS radio button and click
OK to finish the configuration.
7

Quick Start Guide
Configuring PC in Windows NT4.0
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
choose the Protocols tab.
2. Select TCP/IP Protocol and click Properties.
3. Select the Obtain an IP address from a
DHCP server radio button and click OK.
8