Billy Goat 440140 User manual

440140 PARKING BRAKE KIT
Part No 440144 - 1 - Form No F051106A
BILLY GOAT FORCE BLOWER
Parking Brake Manual
PARKING BRAKE
Effective and Easy to
use.
P/N 440140

440140 PARKING BRAKE KIT
Part No 440144 - 2 - Form No F051106A
ASSEMBLY
To apply parking brake, simply rotate forks to till they rest against the back end of the tire.
Place once foot on top fork and gently put downward pressure on the fork while carefully
p
ushing unit forward. The forward motion of the tire will help to roll the forks into a fixed
p
osition. To remove from braking position pull unit backwa
r
ds rotating the tire, which will
rotate the forks away from locked position on wheel.
To install parking brake, first install the bushings (item #3) into the rear holes located on the
base next to the rear wheels (see figure below). Next place a washer (item #2) on the fork
shaft, against the stop washer. Then gently push shaft through the bushings and hole until it
rests against stop washer. Finally place pal nut (item #4) on opposing end. To install stop bolt,
p
lace washer face nut (item #6) on screwcap (item #5) until nut reaches the end of the threads.
N
ext insert the screwcap into the hole located in front of the brake and use the nut lock (item
#7) on the interior and tighten it.
4
3
2
1
56
7
Parts List
Part No. Description Qty
1 440143 ROD BRAKE WA 1
2 8172011 WASHER 1/2 SAE 1
3 500130 BUSHING SHIFTER 2
4 840089 NUT PAL 1/2 1
5 8041012 SCREWCAP 1/4-20X2 1/2 ZP 1
6 900453 NUT LOCK 1/4-20 WASH FACE 1
7 8160001 NUT LOCK 1/4-20 1
44014
0
PARKING BRAKE KI
T
1