bioBidet Discovery DLX User manual

PHONE: [phone] | EMAIL: [e-mail]|CHAT: WWW.BIOBIDET.COM
WATER TEMPERATURE | AIR TEMPERATURE | SEAT TEMPERATURE
Press the corresponding button to adjust the temperature settings.
Low - Blue | Medium - Purple | High - Red
WATER PRESSURE
Press the + or - buttons to adjust the water pressure accordingly.
NOZZLE POSITION
Press the arrow keys to adjust the position of the nozzle accordingly.
SETTINGS
QUICK GUIDE
REMOTE
Support: 847.458.2334
Dynamic
stream
Nozzle
forward
Nozzle
backward
Water
pressure
Water
pressure
Nozzle
clean
Night
light
Air
temp
Water
temp
Seat
temp
Open/Close
seat
Open/Close
lid
ff.
OPEN/CLOSE SEOPEN/CLOSE COVER AT NIGHT LIGHT
Open or close the lid. Open or close the seat. Turns the night light on/o
FRONT REAR STOP
Activate oscillating front wash. Activate oscillating rear wash. Stop any operation.
Press again to turn off oscillation. Press again to turn off oscillation.
FUNCTIONS
DRY
Press to activate the warm air dryer.
Press again to adjust the fan speed.
Low - Blue | Medium - Purple | High - Red
The dryer automatically turns off after 4 minutes.
DYNAMIC STREAM NOZZLE CLEAN
Activate during a wash to quickly alternate Extends the nozzle for manual cleaning.
the water temperature from warm to cold. The seat must be unoccupied.
FLUSH
Flushes the toilet.
The seat must be unoccupied.

Our goal is to provide you with the highest quality products and service possible.
If there is anything we can do to assist with your purchase, we have trained customer service professionals
waiting to assist you. Please feel free to connect with us via phone, email, or chat.
REMOTE
Water Does it Better ®
PHONE: [phone] | EMAIL: [e-mail]|CHAT: WWW.BIOBIDET.COM
QUICK GUIDE
QUICK INSTALLATION GUIDE
CONGRATULATIONS ON YOUR PURCHASE
Connect the T-valve.
Connect the T-valve to the water
supply valve.
Remove accessories first, then
remove the toilet from the box.
Open the box right side up. Secure the toilet base.
Press down evenly on the toilet
and secure it with the provided
washers and nuts.
Position the wax ring on the
flange and lower the toilet in
place. Remove the cap from
the toilet water inlet.
Place the wax ring and toilet. Attach the hoses.
Connect the toilet and bidet hoses
to the T-valve.
Test the connections.
Open the water supply valve and
check for leaks. Plug the power
cord into a grounded 120v outlet.