bioBidet BB-600 User manual

Bio Bidet BB-600 Ultimate Bidet Seat Control Panel is ergonomically and intelligently designed for easy and efficient
operation.
All new BB-600 is designed to fit any toilets including 1pc and 2pc toilets. Its is fully functioned bidet seat with two nozzle,
warm air dry, pulsating massage, oscillating wide clean, kids, auto wash, hydraulic heated seat and much more. All this
functions and features available for you at your finger tips.
Shape of control panel follows exact contour of the bidet seat body for easier operation as well as for esthetic purpose. Each
large buttons with extra space around them for easy identification and operation.
STOP
Press to stop all current operation. When seat sensor is deactivated, all operations will
automatically stop.
Cleansing
(Posterior)
Press for posterior wash. This function will stop automatically in 60 seconds.
Press again to activate "Oscillation". Nozzle will move back and forth to widen cleansing area.
"Oscillation" will stop if pressed again.
Bidet
(Anterior)
Press for feminine wash. This function will stop automatically in 60 seconds.
Press again to activate "Oscillation". Nozzle will move back and forth to widen cleansing area.
"Oscillation" will stop if pressed again.
Dry
Press for warm air dry. This function will stop automatically in 180 seconds.
Kids
Press to change all pre-settings to lowest including water temperature, pressure and dry
temperatures.
Self Diagnose
Built in PCB has self-diagnose function. Should there be any defects in main components, self-
diagnose function will automatically kick in and power LED will flash. Unplug and contact service
center immediately for service.
Self Cleaning
Nozzle will be cleaned automatically before and after every use.
AUTO WASH
Wash, Oscillating Wash, Dry function will operate automatically. Each cycle last approximately
for 20 seconds in 60 seconds total operating time.
For auto wash for bidet function, press bidet then press auto.
AERATION
Gentle, delicate but satisfying water stream with air bubble within water stream.
Press button again to stop. Aerated automatically initiates for posterior wash.
NOZZLE POSITION
Nozzle position can be adjusted in 3 levels.

WATER PRESSURE/
DRY TEMPERATURE
Water spray pressure and dryer temperature can be adjusted in 5 levels.
WATER TEMPERATURE/
SEAT TEMPERATURE
Water temperature and Seat temperature can be adjusted in 4 levels..
POWER SAVING
Press to activate Power Saving. Unit will be in economy mode after 1 hour from last usage. In
economy mode, temperature of water and seat will be kept to 30C and LED will turn Green to
indicate economy mode. As soon as seat sensor activates or power saving button is pressed
again, unit will be in wake mode and return to settings used in last usage.