bioBidet Prodigy P700 User manual

Installation Manual

INSTALLATION MANUAL
Before Installing
Parts List
A
B
● Confirm the compatibility of your
bathroom using the dimensions below:
A
B
C
Remote
Wall Mount
Wax Ring
Conversion Nut
(optional)
Hose
AA Batteries (x3) Screws (x3) Anchors (x3)
A - Rough-In
B
- Shutoff Valve Distance
C
- Shutoff Valve Length

INSTALLATION MANUAL
Remove Existing Toilet
1
● Close the water shutoff valve and flush the toilet.
● Disconnect the existing water hose and unscrew the
flange bolts.
● Remove the toilet and wax ring, leaving the exposed
trap (pictured below).
*If you are not immediately installing the Prodigy, cover the
exposed trap to eliminate any fumes.

INSTALLATION MANUAL
Install Prodigy Base
2
● Attach the provided water hose to your water shutoff valve.
● Apply the new wax ring to the exposed trap.

INSTALLATION MANUAL
Attach Bidet Seat
3
1
● Line up the toilet base over the flange screws. Place the
toilet base and re-secure the flange bolts.
● Feed the water hose through the back of the toilet base
and attach it to the underside of the bidet seat.

INSTALLATION MANUAL
● Attach the bidet seat to the toilet base by lining up the
mounting hooks and pressing down until you hear a “click”.
REMOVING THE BIDET SEAT
The bidet seat can be removed by pulling
the tabs beneath the unit forward and lifting up.

INSTALLATION MANUAL
1
● Plug in the power cord.
P770
P700
● Insert the included batteries into the remote control and
flush the toilet.
● Open the water shutoff valve.
ENJOY YOUR NEW PRODIGY
Please contact Bio Bidet Support if you have any questions.
Trained support agents are available Mon - Fri, 9:00 AM - 5:00 PM CST.
Email: [e-mail] Phone: [phone] Chat: www.biobidet.com