BION TECHNOLOGIES tantulus hp indoor tunableWhite User manual

tantulus hp indoor
tunableWhite
USER MANUAL
BEDIENUNGSANLEITUNG
www.biontechnologies.com

tantulus hp indoor
tunableWhite
USER MANUAL
Safety Instructions
Devices must be installed by qualified personnel in compliance
with all pertaining regulations.
Always refer to the technical parameters in the data sheet. All items are subject to technical modification.
Refer to the attached User Manual as a basis for correct use.
Consult circuit diagram for correct wiring.
Note! Before attempting any work, make sure device is separated from main power.
Make sure protection against line voltage shock is provided during installation.
We recommend securing the installation by RCD circuit breakers.
Note that adjacent parts or devices must be temperature proof up to 90°C.
Do not operate the fixture with inductive consumers (fluorescent lamps, gas discharge lamps, ventilators etc.) in the same
electric circuit. Activation of inductive consumers can cause damage to the operating device.
Do not place heat insulation material on the fixture.
Mind the operating temperatures of the fixture according to the technical data sheet.
Before drilling the mounting holes, take precautions not to harm or damage any power lines.
Do not solder cable strands. Use cable strand sleeves instead.
Note and mind voltage label on the device.
Make sure flawless electrical connectivity is provided.;
Connecting the lamp to the powered-up mains can cause damage to the lamp! (voids product warranty!)
No modification allowed. No liability will be assumed in case of damage incurred by alteration, improper use or faulty installation.
2 | www.biontechnologies.com

Scope of delivery
Check completeness of supplied device immediately after receipt.
In delivery included:
1x Fixture tantulus according specifications type label
Bracket count: 2 <= 1225 mm (48.23 in) < 3
User manual
If you detect any transportation damage or differencies between specified packing contents and your unpacked delivery, please contact
your dealer immediately.
www.biontechnologies.com | 3

Technical Data
Dimensions 23 mm x 19 mm [W x H]
0.91 in x 0.75 in [W x H]
Standard Unit Lengths 105 mm (only end fitting), 207 mm (only end fitting), 310 mm, 615 mm, 920 mm, 1225 mm,
1530 mm, 1835 mm
4.14 in (only end fitting), 8.15 in (only end fitting), 12.21 in, 24.22 in, 36.23 in, 48.23 in, 60.24 in,
72.25 in
Fixture Typ
tunableWhite
Color Temperatures tunableWhite 2700 K - 6500 K
* Project-specific color temperature ranges for tunableWhite available.
Beam Angles 30° x 120°, 60° x 120°, 90° x 120°, 120°, 120°
120°, 160°
Luminous Flux 105 mm (4.14 in): 192 lm
207 mm (8.15 in): 385 lm
310 mm (12.21 in): 583 lm
615 mm (24.22 in): 1166 lm
920 mm (36.23 in): 1749 lm
1225 mm (48.23 in): 2332 lm
1530 mm (60.24 in): 2915 lm
1835 mm (72.25 in): 3498 lm
Light Source 105 mm (4.14 in): 7 LEDs
207 mm (8.15 in): 13 LEDs
310 mm (12.21 in): 20 LEDs
615 mm (24.22 in): 40 LEDs
920 mm (36.23 in): 60 LEDs
1225 mm (48.23 in): 80 LEDs
1530 mm (60.24 in): 100 LEDs
1835 mm (72.25 in): 120 LEDs
R9 20
LED-Binning
MacAdam Ellipses Binning 2
Input Voltage Power supply: external | 36 VDC
Power Consumption 105 mm (4.14 in): Max. 5 W
207 mm (8.15 in): Max. 5 W
310 mm (12.21 in): Max. 5 W
615 mm (24.22 in): Max. 10 W
920 mm (36.23 in): Max. 15 W
1225 mm (48.23 in): Max. 20 W
1530 mm (60.24 in): Max. 25 W
1835 mm (72.25 in): Max. 30 W
Protection Class II
Storage Temperatur -20 °C / +40 °C | -4 °F / +104 °F
Operating Temperature -20 °C / +40 °C | -4 °F / +104 °F
Start-up Temperature -20 °C / +40 °C | -4 °F / +104 °F
Lumen Maintenance [L70] 65’000 h @ 25 °C (77 °F) | 40‘000 h @ 50 °C (122 °F)
LED-Class Class 2 LED Product
4 | www.biontechnologies.com

Housing Aluminium
Housing Color(s)
Aluminium
anodized
(Standard)
Lens Material: PMMA
Translucency
clear 90%
frost 87%
white 70%
Weight 325 mm (12.80 in): 0,11 kg (0.24 lbs)
630 mm (24.80 in): 0,22 kg (0.49 lbs)
953 mm (37.52 in): 0,33 kg (0.73 lbs)
1240 mm (48.82 in): 0,44 kg (0.97 lbs)
1545 mm (60.83 in): 0,55 kg (1.21 lbs)
1850 mm (72.83 in): 0,66 kg (1.46 lbs)
Ingress Protection IP20
Environment
indoor
Certification
Engineering Drawing
www.biontechnologies.com | 5