PLEASE READ AND SAVE
THESE IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, basic safety
precautions should always be taken including
the following:
• Usethefanonlyforpurposesdescribedin
the instruction manual.
• Toprotectagainstelectricalshock,donot
immerse the fan, plug or cord in water or
spray with liquids.
• Closesupervisionisnecessarywhenany
appliance is used by or near children.
• Unplugfromtheelectricaloutletwhennotin
use, when moving the fan from one location
to another, before putting on or taking off
parts and before cleaning.
• Avoidcontactwithanymovingparts.
• Donotoperateinthepresenceofexplosive
and/or flammable fumes.
• Donotoperatefanuntilfullyassembledwith
all parts properly in place.
• Toavoidfirehazard,NEVERplacethecord
under rugs or any parts near an open flame,
cooking or other heating appliance.
• Ensurethatthefanisswitchedofffromthe
supply mains before removing the guard.
• Donotoperateanyappliancewitha
damaged cord, plug, after the appliance
malfunctions, or has been dropped/damaged
in any manner.
• Theuseofattachmentsnotrecommended
or sold by the appliance manufacturer may
cause hazards.
• Donotuseoutdoors.
• Donotletthecordhangovertheedgeofa
table or counter, or come into contact with hot
surfaces.
• Todisconnectfromtheelectricalsupply,grip
the plug and pull from the wall outlet. DO
NOT pull on the cord.
• Alwaysuseonadry,levelsurface.
• Donotoperatewithoutthefangrillsproperly
in place.
• Thisproductisintendedforhouseholduse
ONLY and not for commercial or industrial
applications.
• Shouldthefanstopworking,firstcheckthe
fuse in the plug (UK only) or fuse/circuit
breaker at the distribution board is operating,
before contacting the manufacturer or service
agent.
• Ifthesupplycordorplugisdamaged,it
must be replaced by the manufacturer or its
service agent or a similarly qualified person in
order to avoid hazard.
• Thisapplianceisnotintendedforuseby
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
DESCRIPTION OF APPLIANCE
(See Fig. 1, 2 & 3)
A. Air output vents
B. Air intake vents
C. Sleep timer button
D. Variable speed dial
E. Power light
F. Oscillation button
G. Power Jack
H. Power Adapter
2
U.K. and IRELAND
3
INTRODUCTION
Congratulations on the purchase of your
Bionaire™ bladeless fan. This fan features
innovative bladeless technology to deliver
smooth air flow and a variable speed dial for
cooling comfort and control.
OPERATING INSTRUCTIONS
1. Set fan on a dry, level surface.
2. Connect the power adapter to the power jack
located on the rear base of the fan.
3. Plug power adapter into the appropriate
outlet.
4. To turn the fan on, turn the variable speed
dial clockwise until the dial clicks. The power
light will glow blue.
5. To adjust the speed, continue to turn the
variable speed dial in the clockwise direction
to increase the speed as desired. The speed
level may be lowered by turning the dial
counterclockwise.
6. To turn the fan off, simply turn the dial
counterclockwise until it clicks and the power
light shuts off.
OSCILLATION FUNCTION
7. If you would like the fan to oscillate, push
the oscillation button located to the right of
the speed dial. To stop oscillation, push the
button again.
SLEEP TIMER
8. Your bladeless fan is equipped with a one-
hour sleep timer. To activate, push the sleep
timer button located to the left of the speed
dial. The power light will blink blue while the
sleep timer function is in use. When time is
up, the power light will glow red. If you wish
to resume operation after the timer has run
out, push the sleep timer button again. To
shut off the power light after the timer has run
out, turn the speed dial counterclockwise until
the dial clicks and the light shuts off.
CLEANING AND MAINTENANCE
Follow these instructions to correctly and safely
care for your fan.
• Alwaysunplugthefanbeforecleaning.
• Besuretocleanyourfanwithasoftcloth
moistened with a mild soap solution.
• Donotallowwatertodriponorenterintothe
fan motor housing.
• Donotusegasoline,thinner,orbenzeneas
a cleaner.
• Lightlyrunavacuumcleanernozzleoverthe
fan vents to remove any dust or dirt that may
have accumulated.
• Cleanthefanwithasoft,dampcloth.
Do not allow the motor or other electrical
components to be exposed to water.
FAN STORAGE
When storing your fan please use the original
box. It is important to keep it in a safe,
dry location.
• Storeyourfanintheoriginalboxoran
appropriately sized box.
• Protectthefanventsfromdust.
• Storeyourfaninadrylocation.
DESCRIPTION OF
THE APPLIANCE
G
H
Fig. 2
A
B
C
EF
D
Fig. 1
C
Fig. 3
FED
Technical Parameters
Adaptor
Unit
Rated input: 100-240V~/50-60Hz
Rated output: 12V
Wire length: 8M
Weight: 0.12kg
Operating temperature: 0-40°C
Rated input: 12V
Rated power: 18W
Operating temperature: 0-40°C
Operating humidity: 85%
Product Dimensions:
L146mm X W146mm X H500mm
Weight: 1.18kg
Package Dimensions:
L182mm X W177mm X 543mm