Birlea DENVER 4’6 BED PINE User manual

Vendor: S000107
Page 1 of 4
ASSEMBLY INSTRUCTIONS
DENVER 4’6 BED PINE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING
YOUR DENVER 4’6 BED FRAME
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
HEALTH & SAFETY:
DO NOT jump on this bed frame
DO NOT use this bed frame if any parts are missing, damaged or worn
DO NOT use this bed frame unless all xings are secured
Always use on a level, even surface
WARNING: If this bed is placed on a laminated oor you must place some protection under all legs
to stop the bed frame from moving. If this is not adhered to there is no guarantee if the bed frame
collapses
CARE & MAINTENANCE:
Periodically check all screws & xings to ensure they are secure
DO NOT push the bed frame as this will damage the legs
Always lift the bed with two people to reposition
Keep any sharp objects away from the frame
www.birlea.com
3m
3 m

85
7
1
4
2
3
10
611
9
No Item Qty Box No Item Qty
1 Post Headend
Post Headend
101
01
01
01
01
01
01
02
02
02
01
1
A
¼* 90 mm
7 x 80 mm
7 x 90 mm
Bolt
HARDWARE LIST ( FOUND IN BOX 02)
Bolt
Bolt
8
2Post Footend
Post Footend
1
1
B
24
3
Grids
Plinth
2
C
12
4
Slat
12
D
4*35 mm Screw
10 x 40 mm Wooden Dowel
8
5
9
10
11
1
1
1
1
1
E
4*16 mm Screw
1
F
Allen Key
10
G
8
H
I
J
K
L
Spacer Block
Screw Cap
4
1
2
16
2
GLUE
Vendor: S000107
2 of 4
** you will need a small
mallet and a screwdriver
Page
I
5
1
7
4
C
C
C
C
C
C
G
G
K
K
K
K
K
K
G
E
E
G
6
2
3
C
C
G
G
K
K
Steep 1 - Use the foot (1) and (4) with the parts (5) and (7) to assemble the headboard. In parts (5)
and (7) use the hardware (C) applying the glue (I). Fit in the feet (1) and (4) to the parts (5) and (7),
using the hardware (G) + (E) to fix it, once it’s done put the hardware (k) on the top of screw. Use
the foot (2) and (3) together with the part 6 to assemble the footboard. Use hardware (C) applying
glue (I). Fit in the feet (2) and (3) with the part 6, fix these parts with the hardware (G) and (E) on the
screw tips.
7
SideRail
Headend Rail
Footend Rail
8
6

Vendor: S000107
B
D
AE
C
E
A
C
L
F
B
F
A
A
5
Step 3: Fix hardware part L to the headend (7) using hardware part F, then attach the side
rails (8) using hardware parts A, C and E
DO NOT use any power tools as this may damage the frame and will invalidate any claim
Page 3 of 4
Step 2: Attach a plinth (10) to the headend (5) using hardware part H.
DO NOT use any power tools as this may damage the frame and will invalidate any claim
H
5
10
I
K
K
K
K

B
B
B
B
B
B
B
J
J
Step 5: Fix the slats (11) into position whilst applying pressure to both side rails (8) using hardware parts B and
J and a screwdriver (not provided)
DO NOT use any power tools as this may damage the frame and will invalidate any claim
Vendor: S000107
Order Number: B 00567
Step 4: Secure the centre rail (9) using hardware part F
DO NOT use any power tools as this may damage the frame and will invalidate any claim
5
10
6
9
8
8
F