Birlea OXFORD User manual

ASSEMBLY INSTRUCTIONS
90CM OXFORD PINE BED
IMPORTANT:READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR
90CM OXFORD PINE BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level,even surface.
WARNING:If this bed is placed on a non-carpeted floor you must place some protection under all legs to stop
the bed frame from moving. If this is not adhered to there is no guarantee if the bed frame collapses.
CARE & MAINTENANCE:
Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com
Page 1 of 5

Vendor:S000409
Page 2 of 5
Parts List Hardware List
Part Description Description
M6×80mm Bolt
φ10×30mm Dowel
φ4×30mm Screw
Plastic Cover
Allen key
Nut
Headboard Left Post
Headboard Right Post
Footboard Left Post
Footboard Right Post
Side Rail
Box Qty
1 1 1
1 1
1 1
1 1
1 2
1 2
Qty
12
14
60
1
28
16
1 2
1 2
1 6
1 6
1 1
2
3
4
5
6
Part
A
M6×70mm Screw 4D
M6×70mm Bolt 6E
B
C
F
G
H
7
8
9
10
Slat
11
** You will need a screwdriver and a small mallet (not provided).
Step 1:Please insert the dowels(C) into 2×side rails(5),2×bottom rails(6), and 2×upper
rails(7),using a small mallet(Not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
11
1
2
3
4
5
5
6
9
7
8
8
7
10 6
Bottom Rail
Upper Rail
Topper
Headboard Rail
Footboard Rail

Vendor:S000409
Page 3 of 5
Step 2: Insert hardware part C to Headboard rail (9) and Footboard rail (10) using a small
mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3:Attach the headboard left post(1) and headboard right post(2) to the bottom rail(6) and upper
rail(7)using hardware parts A,B,DandF.
Attach the footboard left post(3) and footboard right post(4) to the bottom rail(6) and upper
rail(7)using hardware parts A,B,DandF.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Vendor:S000409
Page 4 of 5
Step 4:Attach Topper(8) to the Headboard/Footboard using hardware parts EandF.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 5: Attach the side rails(5)to the headboard&footboard posts using hardware parts
A,BandF.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Vendor:S000409
Page 5 of 5
Additional Information:
● For complete product information, images and dimension diagrams please visit the
website www.birlea.com
● If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
● Why don't you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.
GGGGGG
GG
GG
G
GG
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
Step 6: Fix the slats(13)to the side rails(5)using hardware G with hand driver(not
provided). Make sure to start from the ends and work towards the middle.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
13