RiverRidge 06-142 User manual

ASSEMBLY INSTRUCTIONS
ADULT ASSEMBLY REQUIRED
WARNING
SEE FULL WARNING ON PAGE 2
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.
ITEM #: 06-142 White
RiverRidge®Ashland Slim Cabinet with Drawer

THIS CABINET WILL HOLD UP TO 12 POUNDS PER SHELF AND 10 POUNDS PER
DRAWER OR A TOTAL OF 46 POUNDS. DO NOT LOAD EACH SHELF WITH MORE
THAN 12 POUNDS OR EACH DRAWER WITH MORE THAN 10 POUNDS. LOADING
WITH MORE THAN 12 POUNDS PER SHELF AND 10 POUNDS PER DRAWER MAY
CAUSE DAMAGE TO THE CABINET OR CAUSE SERIOUS INJURY OR DEATH.

1
2
3
4
5
6
7
8
9
10
12
11
13
14
PARTS LIST
Top Board1PC
QTYNO DESCRIPTION
1
Left Side Panel1PC2
Right Side Panel1PC3
Shelf1PC4
Bottom Board1PC5
Adjustable Shelf1PC6
Lower Cross Bar1PC7
Back Board1PC8
Door1PC9
Drawer Front Board1PC10
Drawer Left Side Panel1PC11
Drawer Right Side Panel1PC12
Drawer Back Board1PC13
Drawer Bottom Board1PC14

Magnet with 2 Screws
Adjustable Anchor Bracket
Plastic Anchor
Machine Screw (4x15mm)
Screw (3.5x25mm)
Cam Bolt
Cam Lock
Wood Dowel
Hinge
Machine Screw (4x18mm)
Knob
Screw (3x12mm)
Screw (4x30mm)
Screw(4x10mm)
Magnet Plate
Shelf Holder
Screw (2.5x10mm)
PARTS LIST
1 SET
16PCS
12PCS
12PCS
1PC
1PC
2PCS
A
B
C
D
E
F
G
1PC
1PC
H
I
1PC
4PCS
J
K
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
NO PARTS QTY DESCRIPTION
9PCS
L
12PCS
M
1PC
N
1PC
2PCS
8PCS
O
P
Q
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.

STEP 1
STEP 2
4
D
D
3
2
A
A
A
A
A
A
A
A
1. Screw 4 cam bolts (A) into cam bolt holes on left side panel (2).
2. Screw 4 cam bolts (A) into cam bolt holes on right side panel (3).
1. Attach magnet (D) to shelf (4) by inserting 2 screws through holes on magnet (D), then
tighten to shelf (4).