Birlea ATLAS User manual

Vendor: S000053
Page 1 of 3
ASSEMBLY INSTRUCTIONS
ATLAS 3’ BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR ATLAS 3’ BED
FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
WARNING: If thi bed i placed on a non-carpeted floor you mu t place ome protection under all leg to top
the bed frame from moving. If thi i not adhered to there i no guarantee if the bed frame collap e .
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000053
Page 2 of 3
Part Li t Hardware Li t (found in box 1)
Part De cription Box Qty Part De cription Qty
1 Headend 1 1 A M6 x 16mm JCBC Screw 8
2 Footend 1 1 B M6 x 45mm JCBC Screw 2
3 Side Support 2 2 C M6 Nut 2
4 Mid Support 2 1 D Single Slat Cap 24
5 Slat 3 12 E Finial 4
** M4 Allen key upplied
Step 1: Fix the side support (3) to the headend (1) and footend (2) using hardware part , but do not fully
tighten. Place the mid support (4) on top of both side supports (3) and secure using hardware parts B and C.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.

Vendor: S000053
Page 3 of 3
Step 2: Place the slat caps onto each end of each slat (5) then press firmly into the side supports (3). Insert
hardware part E to the headend (1) and footend (2).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.