DREAMS Seoul Sleepmotion 200i User manual

Double
King
Murphy Lifestyle Bed
Sleepmotion 200i
Two person
assembly
1 hour approx
assembly time
MK1 210708

Thank you
Hello, thanks for choosing to purchase your bed from Dreams - you're now on your way to your best
ever night's sleep. Before you begin building your bed, please take a moment to read through the
instructions and make sure that you've got all the relevant parts listed on the following pages.
Assembly tips
Before you begin, it’s best to identify all parts and fittings to build your bed.
We advise laying these out on the floor to check you have everything, and
familiarising yourself before building.
Help and support
At Dreams, it’s our mission to give the whole nation a great night’s sleep - this
means that the quality of our products is of utmost importance to us. If there
are any issues with your product or any missing parts, please contact our Help
Centre on 0800 652 6750, where a member of our team will be happy to help.
(For customers based in Northern Ireland, please call 028 9050 8300)
Safety and care
It’s really important to ensure children and animals are kept away from the
assembly area, as there are small components used in this bed which could
present a choking hazard. All plastic and wrapping materials should also be
To keep your little ones busy, there is a colouring page inside the back cover.
Recycling
Please ensure that packaging is disposed of in a safe and environmentally
friendly way, and recycle where possible. Our assembly instructions are
printed on recycled paper. Please keep your assembly instructions safe
to refer back to in the future.
We recommend that you build your new bed in the room you’d like it to be
located - this will help prevent any risk of damage to your newly built bed
whilst moving it.
Top tip
Murphy Sleepmotion Lifestyle Bed - Assembly guide - Page 1

Parts
Parts shown in dotted lines are packed in the sleepmotion bed base carton.
A
B
C
D
K
K
LL
M
1
1
1
1
A. Headboard
B. Footboard
C. Side rail - Left
D. Side rail - Right
2
2
1
Parts list
K. Bedsides
L. Metal Legs for Bedsides
M. Power adapter with 90º LV plug
Murphy Sleepmotion Lifestyle Bed - Assembly guide - Page 2
Important information
Identify which base you have purchased as the assembly method may change.
If you have purchased the Ottoman base please follow the instructions below in the current order.
If you have purchased a Sleepmotion base, please follow the assembly instructions provided in the Sleepmotion
side rail pack 3L. Once the base is built please follow the AI provided in pack 3L to build your frame around the
Sleepmotion Base.

Please note
To control the bed via an APP, please go to the APP store or Google Play and download the
'NAPP by Dreams". Once downloaded and registered stand close to the bed and 'add device'
then follow the instructions carefully. When connection is made you will be able to control the
Bed using 'NAPP by Dreams'.
Before starting assembly please refer to the owners manual
supplied with your sleepmotion 200i bed base and follow the
instructions taking note of any safety precautions or operational
safety requirements of the installation.
Build the bed base first using only the eight longer legs 6‘’
(15cm), see stage 1.
Place the base in final position in the room of use, connect the power and check the operation
then step by step follow the bed assembly instructions below, to build the bedstead around the
sleepmotion 200i bed base.
Important:
Murphy Sleepmotion Lifestyle Bed - Assembly guide - Page 3

Tools required
Please check you have all these below
Cross head
screwdriver
Tape measure
0 1 2 3 4 5 6 7 8 9 1010 11 12 13 14 15 16 17 18cm
Fittings
Please check you have all the parts listed below with your product:
a x14 b x14 c x14
Bolts (M8x30mm) for fitting
side rails (C&D) to headboard
& footboard (A&B) Flat washers for M8 bolts
Spring washers for M8 bolts
Hardware needed for fixing side rails to headboard & footboard
packed in side rail pack 3L - hardware pack (D)
Hardware needed for fixing bedsides to headboard
packed in headboard pack 1 - hardware pack ( B)
h x1
Spanner for M8 nuts
f x4 g x16
Spring washers for M8 bolts
e x4
Flat washers for M8 bolts
b x4 c x4
Threaded studs (M8x60mm)
for fitting bedsides (K) to
headboard (A)Nuts for M8 bolts
Screws (4x20mm) for fitting
metal legs (L) to bedsides (K)
(N.B. may include x4 spare
screws)
m x6
Bolts (M8x40mm) for bolting
wings to main headboard
Spring washers for M8 bolts Flat washers for M8 bolts
b x6 c x6 d x1
Allen key for M8 bolts
Hardware needed for fixing wings to headboard
packed in headboard pack 1 - hardware pack (A)
Power Plug
Power Plug - connects the LV socket on rear of
headboard to wall socket - hardware pack (C) M
Murphy Sleepmotion Lifestyle Bed - Assembly guide - Page 4

1
Folding Headboard - use pack 'A'
Left
Right
Unfold wings, unzip compartments and retrieve
hardware packs (A) & (B) & (C) from compartment
in left hand wing.
Hardware
Packs A & B
Hardware
Packs A, B & C
m
x6
b
x6
c
x6
d
x1
m
cb
d
Unclip both cables and pass through access
hole into main headboard compartment.
Bolt each wing to main headboard - screw three
bolt sets (m), (b) & (c) into the pre-tapped holes
on each side - tighten with allen key (d).
a) Connect both USB
terminals together (x).
b) Connect both lighting
cables together (y).
c) Re-zip compartments and
headboard assembly is now
complete.
M
i)
ii)
iii) iv)
Hardware
Packs A, B & C
Power Plug
pack (C)
(y)
(x)
Murphy Sleepmotion Lifestyle Bed - Assembly guide - Page 5

A
3
2
Bedside assembly - use pack 'B'
g
x12
f
x4
f x2
gx6
g
K
L
x2
c
x4
b
x4
h
x1
e
x4
c
b
h
e
M
Screw the threaded bolts (f) into the
tapped holes in rear of the bedside chests
until they stop, do not over-tighten..
K
For safety, remove glass during this step
and place well away from the workplace.
.
.
Murphy Sleepmotion Lifestyle Bed - Assembly guide - Page 6
Please do not sit or stand on the bedside, maximum load is 25 Kg.
Do not drag the bed across the floor as the bedside legs will be damaged.

4
Bed assembly - use pack 'C'
10mm
10mm
A
B
a
c
b
a
x8
b
x8
c
x8
a
c
b
M
Murphy Sleepmotion Lifestyle Bed - Assembly guide - Page 7

Screw in the legs and place the electric
bed base in the position in which it is
to be used.
5
6
x8
To the pre-assembled headboard, fit the
right hand side rail (D).
10mm
20mm
a
cb
d
A
A
D
D
90%
a
x2
b
x2
c
x2
d
x1
Murphy Sleepmotion Lifestyle Bed - Assembly guide - Page 8

Carefully position the electric bed
base and plug in the power cable
then raise the head and foot ends
7
Connect the footboard (B) to the
bracket on the side rail.
8
a
x1
b
x1
c
x1
d
x1
A
B
B
a
cb
d
D
90%
Murphy Sleepmotion Lifestyle Bed - Assembly guide - Page 9