Birlea BERLIN OTTOMAN 3' BED User manual

Vendor: S000145
Page 1 of 5
ASSEMBLY INSTRUCTIONS
BERLIN OTTOMAN 3’ BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR BERLIN
OTTOMAN 3’ BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
WARNING: If thi bed i placed on a non-carpeted floor you mu t place ome protection under all leg to top
the bed frame from moving. If thi i not adhered to there i no guarantee if the bed frame collap e .
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000145
Page 2 of 5
Part Li t Hardware Li t (found in box 2)
Part De cription Box Qty Part De cription Qty
2 Footend 3 1 A M5 llen Key 1
3 Headend 1 1 B M8 x 30 mm Bolt 8
4 Side Rail Left 2 1 C M8 Spring Washer 8
5 Side Rail Right 2 1 D M8 x 22 mm Flat Washer 8
6 Crossbar 3 1 E M8 x 14 mm Nut 6
7 Corner Bracket 2 4 F M14 Spanner 1
9 Metal Frame 3 1 G M6 x 20 mm Bolt 16
11 Metal Hook 3 1 H M4 llen Key 1
12 Pull Strap 3 1 I M4 x 60 mm Screw 4
13 Slat 3 13 J M8 x 40 mm Bolt 6
14 Fabric Base 3 1 K
Slat Cap
26
** You will need a crewdriver (not provided).

Vendor: S000145
Page 3 of 5
Step 1: Fix the left side rail (4) and right side rail (5) to the headend (3) and footend (2) using hardware parts
, B, C and D.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 2: ttach the corner brackets (7) using hardware part G and H. Fix the crossbar (6) into position using
hardware part I and a screwdriver (not provided).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.

Vendor: S000145
Page 4 of 5
Step 3: ttach the metal frame (9) to the gas lifts pre-fixed to the side rails using hardware parts , E, F and
J. Insert the metal hook (11).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 4: To attach the pull strap (12) place it beneath the frame, then pull the strap on the inner side of the
frame through the strap on the outer side to form a knot. Place hardware part K onto each slat (13) then
push firmly into the metal frame (9).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim

Vendor: S000145
Page 5 of 5
Step 5: Tilt the bedframe onto its side then attach the fabric base (10)
DO NOT use any power tools as this may damage the frame and will invalidate any claim
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.