Birlea LYNX 4 DOOR 2 DRAWER ROBE User manual

Page 1 of 12
ASSEMBLY INSTRUCTIONS
4 DOOR 2 DRAWER ROBE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR USE YOUR 4
DOOR 2 DRAWER ROBE
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
CARE & MAINTENANCE:
Assem le in the room of use.
Assem ly should e carried out with this item laying flat, not standing upright
Assem le on a soft, clean surface to prevent damages
To remove the printed num ers on the pieces, use a moistened cloth
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the ed frame as this will damage the legs.
Always lift the ed with two people to reposition.
Keep any sharp o jects away from the frame.

Page 2 of 12

Page 3 of 12
Parts L st Hardware L st (found n box 2)
Part Descr pt on Box Qty Part Descr pt on Qty
1 Top Panel 1 1 A 8 x 30 mm Wooden Dowel 44
2 Shelf 1 1 B Simple Minifix Screw 20
3 Base Panel 1 1 C Cam Lock 36
4 Left Panel 2 1 D Plastic Cap 32
5 Right Shelf Divider 1 1 E 8 x 50 mm Wooden Dowel 8
6 Left Shelf Divider 1 1 F 3.5 x 25 mm Screw 12
7 Drawer Ca inet Right
Panel
1 1 G 3.5 x 20 mm Screw 4
8 Right Panel 2 1 H 3.5 x 14 mm Screw 64
9 Door 3 2 I 10 x 10 mm Tack 20
10 Left Mirrored Door 3 1 J Small Plastic Foot 6
11 Right Mirrored Door 3 1 K Hinge 12
12 Drawer Front 1 2 L Hinge Bracket 12
13 Drawer Ca inet Left
Panel
1 1 M 3 x 14 mm Screw 18
14 Drawer Ca inet Top
Panel
1 1 N Open Rail Support 2
15 Right Side Drawer
Panel
1 2 O Rail Support 2
16 Left Side Drawer Panel 1 2 P Dou le Minifix Screw 8
17 Back Drawer Panel 1 2 Q Metal Claw 14
18 Drawer Base 1 2 R Glue 1
19 Left Front Support 1 1 S 4.5 x 45 mm Screw 8
20 Right Front Support 1 1 T Metallic Angle Plates 4
21 Back Support 1 2 U 3.5 x 20 mm Screw 12
22 Plinth 1 2 V Triangle Support 12
23 Back Panel 1 4 W Crayon 4
24 Hanging Rail 1 1 ** You w ll need a small mallet and a screwdr ver for
assembly.
25 Spine 2 1
26 Handle 3 6
27 Drawer Runners 1 2

Page 4 of 12
Step 1: Prepare the parts for assem ly using hardware parts A, B, E, G, H, I, J, K, L, M, N, O, R and T. You will
need to use a small mallet and a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Page 5 of 12
Step 2: Attach the drawer ca inet right panel (7) and drawer ca inet left panel (13) to the ase panel (3)
using hardware part S and a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Step 3: Attach the plinths (22) to the ase panel (3) using hardware parts H and T with a screwdriver (not
provided). Fix hardware part J to the ase using hardware part I and a small mallet (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Page 6 of 12
Step 4: Attach the drawer ca inet top panel (14) using hardware parts C and P with a screwdriver (not
provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Step 5: Attach the supports using hardware parts C and D with a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Page 7 of 12
Step 6: Attach the right panel (8) and shelf (2) using hardware parts C and D and a screwdriver (not
provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Page 8 of 12
Step 7: Secure the shelf (2) to the supports using hardware parts C, D and P. Position the hanging rail (24).
Attach the left panel (4) using hardware parts C and D. You will need to use a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Page 9 of 12
Step 8: Attach the shelf dividers using hardware parts C and D with a screwdriver (not provided). Connect
two ack panels (23) together with the spine (25) and position.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Page 10 of 12
Step 9: Attach the top panel (1) using hardware parts C and D with a screwdriver (not provided). Secure the
ack panels (23) using hardware parts I, Q, V and U with a small mallet and screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Page 11 of 12
Step 10: Attach the doors as shown, then attach the handles (26) using hardware part F. You will need to use
a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Page 12 of 12
Step 11: Assem le the drawer components using hardware parts C, D, F, M, R and S with a screwdriver (not
provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Additional Information: