BDI Icon 9423 User manual

Back panel
Shelf
brackets x 2
F x 6
E x 2
D x 1
C x 7
B x 3
A x 4
Hardware list:
Base
G x 1
H x 1
ICON is a trademark of
Becker Designed Inc.
All rights reserved.
Patents pending
©2003 Becker
Designed Inc.
x 4 of each
K
L
Your ICON home theater furniture is engineered for easy assembly carefully
follow this procedure to prevent any damage. All tools necessary are
provided. Icon is designed for indoor use on level surfaces. clean glass parts
with glass cleaner, clean steel and wood parts with a moist cloth. If any parts
are damaged or missing please contact BDI at [email protected]
Designed by : Cristian Wicha & Bill Becker
Component list:
Glass shelves x 2
Front Frame
Icon 9423
Assembly Instructions
Glass top
Arm
HIGH PERFORMANCE
FURNITURE FOR YOUR
HOME THEATER

Back panel
Step 2
install frame onto base.
Use twisting motion and make sure frame is
completely seated on base . There should be 1/
16" gap between wood base and steel frame
Install Levelers x 6
adjust levelers so base is level and stable.
F
x 6
x 1
H
Step 1
installing the arm
D

Step 4
installing Back panel.
back panel is to be installed with
small holes facing backward.
wire management straps.
velcro straps are supplied to control
cables. they can be screwed into
the steel at top and bottom of the
arm or into the small holes on the
back panel.
Step 3
installing the Shelf
brackets.
shelf brackets can be adjusted to
offer three different shelf positions.
K
L
x 2
E
H
1/16"
GAP
x 2
brackets
E
H
E

Shelf Glass, Bottom :
Use 2 x C
Use 2 x A
Top Glass:
Use 3 x C
Use 1 x B
Use 2 x A
Step 5
installing Glass shelves.
Use appropriate hardware . Apply
Felt washers to the stainless pucks
prior to glass installation.
Note: leave screws loose until all
screws have been installed. Then
tighten securely. It may be
necessary to loosen shelf brackets
to obtain proper fit. Once fitted
tighten securely.
Shelf Glass:
Use 2 x C
Use 2 x B
Becker Designed Inc.
14101-A Parke Long Ct
Chantilly VA 20151
www.bdiusa.com