Birlea URBDSBRUS User manual

IMPORTANT : READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR URBAN DINING TABLE AND BENCH SET RUSTIC.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY:
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber inside the accessories pack.
HEALTH & SAFETY:
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Always use on a level, even surface.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT push this product as this will cause damage.
Always lift this product with two people to repositions.
Keep any sharp objects away from this product.
ASSEMBLY INSTRUCTIONS
www.birlea.com Page of 3
Vendor: S000350
1
URBAN DINING TABLE AND BENCH SET RUSTIC

Parts List Hardware List
Part Descripion Qty Part Description Qty
01 1
Table Top Panel
02
03
04
Table Metal Side ( Left & Right ) 2
2
1
Table Metal Middle
BJCBC screw M6 x 15mm
JCBC screw M6 x 35mm
DJCBC screw M6 x 50mm
8
30
16
A
C
2
Table Metal Support
Page of 3
Vendor: S000350
01
03
03
05
02
04
** You will need a small mallet and
a screwdriver for assembly.
** Some screws and wooden dowel may remain.
Step 1: Attach table metal side (2) to table metal middle (3) and table metal support (4)
and then attach bench metal side (6) to bench metal middle (7) using hardware A and D.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Allen key M4 1
A
D x 16
A
D
07
06
03
02
02
03
05 2
Bench Top Panel
06
07
08
Bench Metal Side ( Left & Right ) 4
4
2
Bench Metal Middle
Bench Metal Bottom
02
06
07
08
06 07
05
06
07
08
06 07
04
07
06
06
07
07
06
06
07

3
Page of 3
Vendor: S000350
Step 2: Attach bench metal bottom (8) to bench metal side (6) using hardware A and B.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3: Attach table top panel (1) to table metal side (2) and table metal middle (3) and then
attach bench top panel (5) to bench metal side (6) and bench metal middle (7) using hardware A and C.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Additional Information:
· For complete product information, images and dimension diagrams please visit the website
www.birlea.com
· If you have any issues with your item please contact the retailer directly you purchased it from
who will be able to resolve any issues with Birlea.
· Why don't you send us photos of your assembled furniture to [email protected] to be shared in
our #birleahome feature on instagram.
01
07
A
B x 8 A
B
06
08
06
A
C
A
C x 30
07
08
06
07
06
07
08
06
02
03
04
05
06
07
08
02
03
06
07
05
06
07
08 06
07