Birlea BERLIN User manual

Vendor: S000145
Page 1 of 5
ASSEMBLY INSTRUCTIONS
BERLIN FABRIC OTTOMAN 5’ BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR BERLIN FABRIC
OTTOMAN 5’ BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
WARNING: If thi bed i placed on a non-carpeted floor you mu t place ome protection under all leg to top
the bed frame from moving. If thi i not adhered to there i no guarantee if the bed frame collap e .
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000145
Page 2 of 5
Part Li t Hardware Li t (found in box 2)
Part De cription Box Qty Part De cription Qty
1 Wooden Block 3 1 A M5 llen Key 1
2 Headend 1 1 B M8 x 30 mm Bolt 8
3 Footend 3 1 C M8 Spring Washer 8
4 Left Side Rail 2 1 D M8 x 22 mm Flat Washer 8
5 Right Side Rail 2 1 E M8 x 14 mm Nut 16
6 Crossbar 3 1 F M14 Spanner 1
7 U Shape Metal 3 2 G M6 x 20 mm Bolt 16
8 Corner Bracket 2 4 H M8 x 40 mm Bolt 8
9 Metal Frame 3 1 I M4 llen Key 1
10 Slat 3 28 J M4 x 60 mm Screw 4
11 Support Leg 3 1 K M8 x 80 mm Bolt 2
12 Metal Hook 3 2 L M8 x 45 mm Bolt 8
13 Pull Strap 3 1 M Slat Cap 56
14 Fabric Base 3 1 ** You will need a crewdriver (not provided).

Vendor: S000145
Page 3 of 5
Step 1: Fix the left side rail (4) and right side rail (5) to the headend (3) and footend (2) using hardware parts
, B, C and D. ttach the wooden block (1) using hardware parts and H.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 2: ttach the corner brackets (8) using hardware parts G and I. Fix the cross bar (6) to the side rails
using hardware part J and a screwdriver (not provided).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.

Vendor: S000145
Page 4 of 5
Step 3: Insert the metal hooks (12) then fix the u shape metal (7) to both ends of the frame using hardware
parts , E, F and L. ttach the metal frame (8) to the gas lifts pre-fixed to the side rails using hardware parts
, E, F and H.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 4: ttach the support leg (11) using hardware parts , E, F and K. To attach the pull strap (13) place it
beneath the frame, then pull the strap on the inner side through the strap on the outer side to form a knot.
Place hardware part M on each end of each slat (10) then press firmly into the metal frame (9).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.

Vendor: S000145
Page 5 of 5
Step 5: Tilt the bedframe onto its side and attach the fabric base (14).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.