Birlea corona User manual

Vendor: S000238
Page 1 of 9
ASSEMBLY INSTRUCTIONS
CORONA 2 DOOR 1 SHELF FLAT SCREEN TV UNIT
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR CORONA 2 DOOR
1 SHELF FLAT SCREEN TV UNIT.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY INSTRUCTIONS:
Please check contents and read instructions carefully before commencing assembly.
To avoid damages assemble the item on a soft, clean surface.
Assemble in the room of use.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fi ings are secured.
Always use on a level, even surface.
It is recommended that two people handle and assemble the item.
Keep small parts out of the reach of children.
CARE & MAINTENANCE:
This product is manufactured in pine which is a wood with natural characteristics including knots, grains,
clusters or indentations.
On unpacking the item you may notice an odour due to the production process, however, this will disappear
after a period of time.
DO NOT place the item ne t to a radiator or direct sunlight as this item is susceptible to temperature
change. It is recommended to maintain an even room temperature with no sudden fluctuations.
For general cleaning use a duster or damp cloth (almost dry) not wet – do not use soap and water,
detergents, aerosol sprays or any polish as the use of these materials would invalidate any claims.
You may wish to re-treat the surface to maintain the original finish. This can be done using block wa (un-
perfumed). Please follow the manufacturer’s instructions carefully.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor.
Periodically check all screws & fi ings to ensure they are secure.
DO NOT push the item as this will damage the base.
Keep any sharp objects away from the item.
www.birlea.com

Vendor: S000238
Page 2 of 9
Parts L st Hardware L st
Part Descr pt on Qty Part Descr pt on Qty
1
Top Panel
1
A Wooden Dowel 16
2
Right Panel
1
B 14 mm Screw 34
3
Left Panel
1
C 30 mm screw 24
4
Centre Panel
2
D 35 mm Screw 16
5
Shelf
1
E 19 mm Bolt 2
6
Base Panel
1
F
Handle
2
7
Back Panel
2
G Hinge 4
8
Right Front Frame
1
H
Clip
2
9
Left Front Frame
1
J
Plug
2
10
Top Front Frame
1
K Shelf Support 4
11
Door
2
L
Corner Bracket
1
12
Front
Plinth
1
M Tack 28
13
Side Plinth
2
** You w ll need a small mallet and a screwdr ver.
14
Cleat
4

Vendor: S000238
Page 3 of 9
Step 1: Insert the right panel (2) into the right front frame (8) ensuring parts are fully pushed together and
correctly lined up. Place the cleats (14) between the marks shown and secure using hardware part C and a
screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Vendor: S000238
Page 4 of 9
Step 2: Insert the left panel (3) into the left front frame (9) ensuring parts are fully pushed together and
correctly lined up. Place the cleats (14) between the marks shown and secure using hardware part C and a
screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Step 3: Insert hardware part A using a small mallet (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Vendor: S000238
Page 5 of 9
Step 4: Attach the centre panels (4) to the base panel (6) using hardware part D and a screwdriver (not
provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Step 5: Connect the top front frame (10) to the left panel (3).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.