Birlea BROOKLYN FABRIC 4 User manual

Vendor: S000059
Page 1 of 4
ASSEMBLY INSTRUCTIONS
BROOKLYN FABRIC 4’ BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR BROOKLYN
FABRIC 4’ BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
WARNING: If thi bed i placed on a laminated floor you mu t place ome protection under all leg to top the
bed frame from moving. If thi i not adhered to there i no guarantee if the bed frame collap e .
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000059
Page 2 of 4
Part Li t Hardware Li t (Found in box 2)
Part De cription Box Qty Part De cription Qty
1 Headend 1 1 A M6 x 25 mm Screw 2
2 Side Rail 2 2 B M6 x 40 mm Screw 8
3 Footend 2 1 C M4 llen Key 1
4 Centre Rail 2 1 D M5 llen Key 1
5 Slat 1 26 E
Double Slat Cap
13
6 Wooden Leg 1 4 F Single Slat Cap 26
7 Support Leg 2 3

Vendor: S000059
Page 3 of 4
Step 1: Remove the wooden legs (6) and slats (5) from the back of the headend (1) and attach the legs to the
headend (1) and footend (3) using hardware parts B and C.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 2: ttach the side rails (2) using the pre-inserted screws and hardware part D.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.

Vendor: S000059
Page 4 of 4
Step 3: Fix the support legs (7) to the centre rail (4), then attach the rail to the frame using hardware parts ,
C and D.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 4: Place hardware parts E and F onto the slats (5) and press firmly into the side rails (2) and centre rail
(4).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim .
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.