SAFAVIEH COUTURE SFV5055 User manual

NOTICE
*Please make sure that you have all parts indicated and they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a soft surface to prevent scratching the finish during assembly.
*This item may require periodic tightening.
*If you are having difficulty, our friendly Customer Care team is always here to help.
Please email customersuppo[email protected]m
PREPARATION
Model# SFV5055
*Before beginning assembly of product, make sure all parts are present. Compare parts with
Product Dimensions: 31.30" W x 25.20" D x 32.70" H
part contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 30 minutes.
*Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should undertake
a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
Parts List and Hardware List
PIECE
DESCRIPTION
PICTURE
QUANTITY
ASeat 1X
BMetal Parts 1X
CMetal Parts 1X
DMetal Parts 1X
EMetal Feet 4X
HW1 Bolt M10 x 90MM 4X
HW2 Bolt M8 x 25MM 4X Weight Capacity: 275 lbs
HW3 Spring Washer 8.5 mm 4X
WARNING: DO NOT STAND ON CHAIR
HW4 Flat Washer 9 mm 4X
WARNING: DO NOT OVER TORQUE BOLTS
HW5 Plastic washer 1X
HW6 Allen Key 5mm 1X
HW7 Allen Key 6mm 1X

PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 30 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
STEP 2：Please assemble the metal parts in the order shown.
STEP 3：Assembled base as above photo.
STEP 4：Please assemble the metal base on the seat.
STEP 5：Please firmly tighten bolts with allen key.
STEP 1：Please assemble the metal parts in the order shown,
repeat the same steps for the other three legs.
HW2
HW3
HW4
HW6
4X
4X
B
E
C
HW5
HW1
HW7
E
E
E
E
D
B
STEP 6：Put the chair upright and make sure the legs are level.