Birlea Edgeware EDG1SBWBK User manual

Assembly Instructions
www.birlea.com
Are you happy with your purchase?
For a chance to win a Love 2 Shop voucher
simply post a picture of your new product
on your preferred social channels tagging
Birlea Furniture and using the hashtag
#ShareYourStyle and #Birlea. One winner
will be selected at random each month.
To view our full terms and conditions please visit our website. www.birlea.com
Thank you for
purchasing a
Birlea product.
That’s great, we would love to hear more from you. Please leave us a review on
our social media channels or Trustpilot. Your feedback will be greatly appreciated.
If for any reason there is something missing, indifferent or incorrect with
your order, please contact the retailer you purchased the item from. We will
work with the retailer to resolve your issue as quickly as possible.
Yes:
No:

12
HEALTH & SAFETY:
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR
USING YOUR EDGEWARE 1 DOOR 2 DRAWER SIDEBOARD
Assemble in the room of use
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To remove the printed numbers on the pieces, use the eraser provided
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the item as this will damage the base.
Always lift the item with two people to reposition.
Keep any sharp objects away from the item.
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children
Always use on a level, even surface.
ASSEMBLY INSTRUCTIONS
www.birlea.com of
1 Page
CARE & MAINTENANCE:
Rev 00
Recycle
EDGEWARE 1 DOOR 2 DRAWER SIDEBOARD
1135mm
797mm
330mm
Vendor: S000139
1,5m
1m

1
1
75
1
15
74
01
Upper Right Backboard
1
1
06
14
04
07
05
03
Bottom Right Backboard
74
1
1
1
16
02
13
12
10
Left Backboard
2
75 1
1
1
1
1
Upper Base
08
09
11
2Right Side of Drawer
Left Side of Drawer
16
1
1
1
1
1
12 Page of 2
Shelf Right
Bottom of Drawer 2
Rear of Drawer 2
2Drawer Front
Door
15
14
13
12
11
10
11
11
1
1
1
11
Frame
Right Side
Division
Left Side
Bottom Base
Intermediate Base
Shelf Left
1
1
Parts List
DescripionPart Box Qty
11
21
3
4
9
8
7
6
5
Vendor: S000139

10 x 10 mm Tack
21
4
4,5 x 45 mm Screw
32
Metallic slide the left field
3,5 x 25 mm Screw
8
N
of
3,5 x 20 mm Screw
3
2
Small Plastic Foot
8 x 30 mm Wooden Dowel
Page
2
1
** You will need a small mallet and a screwdriver for assembly.
** Some screws and wooden dowel may remain.
** Wall plug and screw is supplied to attach strap to the wall.
Metal Claw
Metallic slide the right field
S
T
6
1
O
Cam Lock
Part
5,0 x 60 mm Screw
Qty
3
E3
10
12
6
2
2
2
6
Drawer slide right
Drawer slide left
3,5 x 14 mm Screw
Metal Bracket 46mm
Allen Key
41
7
Bore patch adhesive
M
L
Strap
E9
Shelf Bracket
E
Hinge Part 2 2
4
Structural Screw
Simple Minifix ScrewJ
Descripion
Hardware List
Glue
A1
10
L4 6
Stud
3
1
Hinge shim
10
1
1
P5 3,5 x 14 mm Screw
o2 Handle
Bushing
16
YA
YB
YC
YD
H
I
G
F9
A
1615141312111098
D5
B5
76543210
B3
A8
C1

01
10
04
11
12
Attach hardware part E to the intermediate base (04) and to the rear of drawer (12) using a small
mallet (not provided).
2X
2X
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
4
Step 3:
Attach the hardware part F9 to the door (10) using hardware part S with a screwdriver (not provided).
Step 2:
Step 1:
Page of
Attach the hardware part J to the upper base (01) and the drawer front (11 ) using the a screwdriver
(not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
12
S
S
F9
EE
E
E
E
E
E
E
J
J
J
J
J
J
J
J
E
Vendor: S000139Vendor: S000139

75
Step 6:
of 5
Step 5:
Step 4:
09
Page
Attach hardware parts E and E3 to the left side (06) using a small mallet. Then attach the hardware
part D5 using the hardware part S and a screwdriver (not porvided).
Attach hardware part B5 to the frame (9) using hardware part S and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
12
06
Attach hardware part E to the left and right sides of the drawer (74 to (75) using hardware part A1 and
a small mallet(not provided).
2X
74
2X
S
S
EE
EE
A1
B5
B5
Vendor: S000139Vendor: S000139
E3
E3
E
E
E
E
B5
S
S
D5

Step 7:
Attach the hardware parts E and E3 to the division (07) using a small mallet.Then attach the
hardware part YA using the hardware P5 and a screwdriver (not provided).
Step 8:
07
of
08
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
07
Attach the hardware parts E and E3 to the right side (08) using a small mallet.Then attach the
hardware part YB using the hardware P5 and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 6 12
ATENTION FOR POSITION
YB
E
E
E
E
ATENTION FOR POSITION
YA
E
E
E
Vendor: S000139
P5
E3
E3
E3
E3
E3
E3
P5
P5
E
P5
P5
P5

Step 9:
7
04
Step 10:
Page of
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Attach the intermediate base (4) in the right side (8), using the hardware part G and I.
04
07
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
12
Attach the division (7) in the intermediate base (4), using the hardware part G, H and I.
08
Vendor: S000139
I
I
G
G
I
G
I
H
G
G
H

of
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Attach the left side (6), the division (7), right side (8), to the upper base (1) using the hardware part L
and a screwdriver(not provided). Insert hardware part M into right side (8), the division (7) and left side (6).
8
08
07
Step 12:
Step 11:
05
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
01
Page
Join the bottom base (5) to the assembled section using hardware part O and a screwdriver
(not provided).
12
06
Vendor: S000139
ML
L
L
L
O
O
O
O
O
O

ofPage
Step 13:
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 14:
05
Attach the frame (9) using de hardware parts B5 and S and a screwdriver (not provided).
Attach the hardware part L4 to the bottom base (5) using hardware part A8 and a screwdriver
(not provided).
129
09
L4
A8
A8
L4
A8
L4
A8
L4
A8
L4
A8
L4
B5
S
S

Page
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Attach the left backboard (14), upper right backboard (15) and bottom right backboard (16) using the
hardware parts N and C1 and a small mallet (not provided).
16
12 of 10
14
Step 16:
To secure the item to the wall use hardware part A, B3 and E9 using a screwdriver (not provided), then
attach the hardware part S to the item with a screwdriver (not provided).Then insert the shelf right (2)
and shelf left (3).
03
02
15
Step 15:
N
C1
N
C1
N
C1
N
1º
2º
S
B3
A
Vendor: S000139
N
N
N
N
E9
C1
C1
N
C1

Page
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 17: Attach the hardware part o2 to the door (10) using the hardware part T and a screwdriver
(not provided), then attach the door (10) to the side left (06) using hardware part D5 and F9.
75
10
12
2X
Attach the left side of drawer (74) and the right side of drawer (75) to the rear of drawer (12) and the
bottom of drawer (13) using the hardware part O and a screwdriver (not provided).
1211
Step 18:
Horizontal Adjustment
o2
74
13
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Depth Adjustment
Vertical Adjustment
of
Vendor: S000139
T
T

12
2X
Step 20:
who will be able to resolve any issues with Birlea.
For complete product information, images and dimension diagrams please visit the website
Attach the hardware part YC and YD using the hardware part P5 and a screwdriver (not porvided),
then attach the hardware part o2 to the drawer front (11) using hardware part T and a screwdriver
(not provided).
o2
Attach the front of drawer (11) using the hardware part L and M and a screwdriver (not provided).
Page of
If you have any issues with your item please contact the retailer directly you purchased it from
Why don't you send us photos of your assembled furniture to [e-mail] to be shared in
Additional Information:
www.birlea.com
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
12
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 19:
11
2X
our #birleahome feature on Instagram.
Vendor: S000139
A1
L
M
L
M
P5
P5
P5
YD
YC
P5
T
T