Birlea MAYFAIR 5' BED User manual

Vendor: S000013
Page 1 of 9
ASSEMBLY INSTRUCTIONS
MAYFAIR 5’ BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR MAYFAIR 5’ BED
FRAME
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface
WARNING: If this ed is placed on a non-carpeted floor you must place some protection under all legs to stop
the ed frame from moving. If this is not adhered to there is no guarantee if the ed frame collapses.
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000013
Page 2 of 9
1 2 3
4 5 6
7 8 9
10 11 12
13 14 15
16 17 18
19

Vendor: S000013
Page 3 of 9
Parts List Hardware List (found in ox 3)
Part Description Box Qty Part Description Qty
1 Headend 1 1 A 8 x 25 mm Plastic Dowel 24
2 Footend 2 1 B M6 x 40 mm JCBC W 24
3 Side Rail 3 2 C M6 x 40 mm JCBC 18
4 Centre Rail 3 1 D White Nail 20
5 Slat 3 28 E 6/8 Tack 48
6 Drawer Runner Pack 1 4 8 F M3.5 x 16 mm CSK 48
7 Drawer Runner Pack 2 4 8 G M4 x 25 mm CSK 14
8 Support Leg 3 2 H M4 x 32 mm CSK 16
9 Foot 3 4 I M4 x 50 mm CSK 32
10 Drawer Front 4 4 J llen Key 1
11 Drawer Back 4 4 K M6 Flat Washer 16
12 Drawer Side 4 8 L Double Slat Cap 14
13 Drawer Base 4 4 M Single Slat Cap
28
14 Drawer Support 4 8 *You will need a small mallet and screwdriver (not
provided).
15 Drawer Frame Side 4 2
16 Drawer Frame Divider 1 4 2
17 Drawer Frame Divider 2 4 2
18 Drawer Frame Cross Bar 4 2
19 Drawer Frame Support 4 4
Step 1: Join together the drawer front (10), drawer back (11) and drawer sides (12) using hardware part I
and a screwdriver (not provided). Repeat for the remaining drawers.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 2: Slide the drawer base (13) into position on all four drawers. Secure with hardware part E and a small
mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Vendor: S000013
Page 4 of 9
Step 3: Secure the drawer supports (14) using hardware part H and a screwdriver.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4: ttach the drawer runners from pack 2 (7) using hardware part F and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 5: ttach the drawer runners from pack 1 (6) to the drawer frame side (15) using hardware part F and a
screwdriver (not provided). Insert hardware part D using a small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6: ttach the drawer runners from pack 1 (6) to the drawer frame divider 1 (16) and drawer frame
divider 2 (17) using hardware part F and a screwdriver (not provided). Insert hardware parts and D using a
small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Vendor: S000013
Page 5 of 9
Step 7: Insert hardware parts and D to the drawer frame crossbar (18) using a small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 8: Insert hardware parts and D to the drawer frame crossbar (18) using a small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 9: Join together the drawer frame sides (15) and drawer frame crossbars (18).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 10: Secure the frame using hardware parts B and J.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Vendor: S000013
Page 6 of 9
Step 11: ttach the drawer frame dividers (16) and (17).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 12: Insert the drawer frame supports (10).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 13: Secure the frame using hardware parts B and J.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Vendor: S000013
Page 7 of 9
Step 14: ttach the side rails (3) using hardware parts C, J and K.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 15: ttach the feet (9) to the headend (1) and footend (2) using hardware part G and a screwdriver (not
provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 16: Undo the screws and washers in the headend (1) and footend (2) using hardware part J.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Vendor: S000013
Page 8 of 9
Step 17: Secure the headend (1) and footend (2) using hardware part J.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 18: ttach the support legs (8) to the centre rail (4) using hardware parts C and J.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 19: Secure the centre rail into position using hardware part G and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Vendor: S000013
Page 9 of 9
Step 20: Secure the frame using hardware parts C, J and K.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 21: ttach the slats (5) using hardware parts L and M, then secure the frame using hardware part J.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.