Birlea NOVA BED User manual

ASSEMBLY INSTRUCTIONS
120/135/150CM NOVA BED
IMPORTANT:READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR
NOVA BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level,even surface.
WARNING:If this bed is placed on a non-carpeted floor you must place some protection under all legs to stop
the bed frame from moving. If this is not adhered to there is no guarantee if the bed frame collapses.
CARE & MAINTENANCE:
Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com
Page 1 of 4

Parts List Hardware List(found in box2)
Part Description Description
M6×100mm Bolt
φ10×30mm Dowel
φ4×30mm Screw
40×40mm Pad
Allen Key
Nut
Headboard Left Post
Headboard Right Post
Footboard Right Post
Footboard Left Post
Side Rail
Headboard Panel
Footboard Panel
Slat
Box Qty
1 2 1
2 1
2 1
2 1
1 2
2 1
Qty
14
14
14
1
32
4
3
2 1
2 1
2
3
4
5
6
Part
A
B
C
D
E
φ7×50mm Screw
G
F
7
8
Support Leg
Centre Rail
2 3
1 1
9
10
** You will need a screwdriver and a small mallet (not provided).
Step 1: Insert hardware part C to the headboard panel (6) using a small mallet (not provided).
Attach the headboard left post(1) and headboard right post(2) to the headboard panel(6) using
hardware parts A,B,andD. DO NOT use any power tools as this may damage the frame and will
invalidate any claim.
Vendor:S000409
Page 2 of 4
2
1
6
A
A
A
A
B
B
B
B
C
C
C
C
C
C
7
3
2
9
9
9
10
1
5
5
6
3
8
4

Step 2: Insert hardware part C to the footboard panel (7) using a small mallet (not provided).
Attach the footboard left post(4) and footboard right post(3) to the footboard panel(7) using hardware
parts A,B,andD. DO NOT use any power tools as this may damage the frame and will invalidate any
claim.
Step 3: Insert hardware part C to the side rails (5) using a small mallet (not provided).
Attach the side rails(5)to the headboard posts using hardware parts A,B,andD.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Vendor:S000409
Page 3 of 4
7
A
A
B
B
C
C
C
C4
3
AA
A
A
AA
A
A
B
B
B
B
B
B
B
B
C
C
C
C
5
5

Step 5: Fix the slats(8)to the side rails(5)using hardware E with screwdriver(not provided).
Make sure to start from the ends and work towards the middle.
Stick hardware F to the bottom of the legs.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
E x30
F
FF
Page 4 of 4
8
GGGE
E
10
9
99
Vendor:S000409
Step 4: Attach support legs(9) and centre rail (10) to the headboard posts using hardware E with
screwdriver(not provided) and G with hardware D.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

Additional Information:
● For complete product information, images and dimension diagrams please visit the
website www.birlea.com
● If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
● Why don't you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.