Birlea RIO 3 BED FRAME User manual

IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR
USING YOUR RIO 3’ BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Always use on a level, even surface.
WARNING: If this bed is placed on a non-carpeted floor you must place some protection under all legs to stop
the bed frame from moving. If this is not adhered to there is no guarantee if the bed frame collapses.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
4 m
4m
ASSEMBLY INSTRUCTIONS
RIO 3’ BED FRAME
Vendor: S000238
!
f
You
Tube
www.birlea.com Page 1 of 7

HARDWARE LIST
Part Item Qty
30mm dowel
16mm Screw
30mm Screw
22mm Bolt
90mm Bolt
Half moon nut
Coupling screw
Code: S000238
A
D
G
L
B
E
J
M
C
F
K
6
12
4
24
8
6
4
4
4
2
40mm dowel
100mm Bolt
Metal bracket
Page 2 of 7
Recycle
2m
01 2 345 6 7891 0
mm 1 1 1 2 1 3 1 4 1 5 1 6
1Headboard panel (88.2 x 57.4cm)
2Footboard panel (88.2 x 11.2cm)
3Side rail x 4 (95 x 11.2cm)
Headboard post x 2 (85 x 5.2cm)
Left footboard post (40 x 5.2cm)
Right footboard post (40 x 5.2cm)
Slat x 12 (91.2 x 6.5cm)
Support side rail x 2
(32 x 6.5cm)
Part Item Qty
H
N
4
Washer
2
Spacer
1
Allen key
4
5
6
7
8
You will need a screwdriver, small mallet and M11 spanner (not provided).
9Hardware Kit x 1
O4
Plastic hole plugs

Page 3 of 7
Vendor: S000238
Step 1: Insert hardware part B to the side rails (3) using a small mallet (not provided).
Step 2: Insert the dowels B into both siderails as per the drawing.
Please note that the support for the slats must be pointing up and the holes must be pointing outside.
Step 3: Join the two rails (3) and attach the support leg (8) using hardware E, J, K (spanner not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
2x
3
2x 3 2x
BB
B
2x 3
3
8
3
3
E
K
J

Vendor: S000238
Page 4 of 7
A
A
A
A
A
A
2x
1
2
Step 4: Attach metal bracket L to the joint of the siderails using hardware C and a screwdriver
(not provided) to fix them, this is for extra support.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 5: Insert hardware part A to the headend panel (1) and footend panel (2) using a small mallet (not provided).
L
L
C
C

Vendor: S000238
Page 5 of 7
1
4
4
F
M
F
M
2
5
6
Step 6: Attach the headend post (4) to the headend panel (1) using hardware parts F and M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 7: Attach the left footend post (5) and right footend post (6) to the footend panel (2) using hardware parts F and M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
F
F
F
F
F
F
5