Birlea Woodstock User manual

Vendor: S000299
Page 1 of 5
ASSEMBLY INSTRUCTIONS
WOODSTOCK 2 DOOR 2 DRAWER WARDROBE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR WOODSTOCK 2
DOOR 2 DRAWER WARDROBE.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this wardrobe if any parts are missing, damaged or worn.
DO NOT use this wardrobe unless all fixings are secured.
Always use on a level, even surface.
WARNING: If this it m is plac d on a non-carp t d floor you must plac som prot ction und r all l gs to stop
th wardrob from moving. If this is not adh r d to th r is no guarant if th wardrob collaps s.
CARE & MAINTENANCE:
Periodically chec all screws & fixings to ensure they are secure.
DO NOT push the wardrobe as this will damage the legs.
Always lift the wardrobe with two people to reposition.
Keep any sharp objects away from the wardrobe.
www.birlea.com

Vendor: S000299
Page 2 of 5
Parts List
1. Top Panel
(Box 1)
2. Drawer Cabinet
(Box 2)
3. Front Panel
(Box 1)
4. Left Panel
(Box 1)
5. Ri ht Panel
(Box 1)
6. Back Panel
(Box 1)
7. Han in Rail
(Box 1)
Hardwar List (found in box 1)
Part D scription Qty
A
M6 x 35 mm Bolt
16
B
M6 x 50 mm Bolt
10
C
6 x 19 mm Washer
16
D
8 x 25 mm Dowel
10
E
Brac et
2
F
Connector
2
G 3 x 15 mm Screw 12
H
Handle
6
K
Allen Key
1
**You will n d a scr wdriv r (not provid d).

Vendor: S000299
Page 3 of 5
St p 1: Attach the left panel (4) and right panel (5) to the front panel (3) using hardware parts A, C, D and K.
DO NOT us any pow r tools as this may damag th fram and will invalidat any claim.
St p 2: Attach the bac panel (6) using hardware parts A, C and K.
DO NOT us any pow r tools as this may damag th fram and will invalidat any claim.

Vendor: S000299
Page 4 of 5
St p 3: Attach the top panel (1) using hardware parts B and D.
DO NOT us any pow r tools as this may damag th fram and will invalidat any claim.

Vendor: S000299
Page 5 of 5
St p 4: Place the top unit onto the drawer cabinet (2) and secure using hardware parts E, F and G with a
screwdriver (not provided). Attach hardware part H to the doors with a screwdriver (not provided) then
insert the hanging rail (7).
DO NOT us any pow r tools as this may damag th fram and will invalidat any claim.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.