Birlea KENSINGTON S000059 User manual

Vendor: S000059
Page 1 of 3
ASSEMBLY INSTRUCTIONS
KENSINGTON 4’6 BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR KENSINGTON 4’6 BED FRAME
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
HEALTH & SAFETY:
DO NOT jump on this bed frame
DO NOT use this bed frame if any parts are missing, damaged or worn
DO NOT use this bed frame unless all fixings are secured
Always use on a level, even surface
WARNING: If thi bed i placed on a laminated floor you mu t place ome protection under all leg
to top the bed frame from moving. If thi i not adhered to there i no guarantee if the bed frame
collap e
CARE & MAINTENANCE:
Periodically chec all screws & fixings to ensure they are secure
DO NOT push the bed frame as this will damage the legs
Always lift the bed with two people to reposition
Keep any sharp objects away from the frame
www.birlea.com

Vendor: S000059
Page 2 of 3
Part Li t Hardware Li t
Part De cription Qty Part De cription Qty
1 Headend 1 A M6 x 25 mm JCBC Screw 2
2 Side Rail 2 B M6 x 40 mm JCBC Screw 8
3 Footend 1 C M4 Allen Key 1
4 Centre Rail 1 D M5 Allen Key 1
5 Slat 26 E Double Slat Cap 13
6 Leg 4 F Single Slat Cap 26
7 Centre Leg 3
Step 1: Insert the legs (6) to the headend (1) and footend (3) and twist to secure
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim

Vendor: S000059
Page 3 of 3
Step 2: Attach the side rails (2) to the headend (1) and footend (3) using the pre-inserted screws and the M5
Allen ey
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim
Step 3: Fix the centre legs (7) to the centre rail (4) using the M5 Allen ey, then attach the rail to the headend
(1) and footend (2) using hardware part A and the M4 Allen ey
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim
Step 4: Fix the slats (5) to the side rails (2) using hardware parts E and F
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim
For complete product information, images and dimension diagrams please
visit www.birlea.com