Birlea PHONENIX User manual

Assembly Video
For a step by step guide on how
to build our Phoenix Ottoman
Bed visit our YouTube channel
‘BirleaFurnitureLtd’ or
alternatively scan the below
code on your smart phone.
How to scan a QR code from an apple device
Step One: Open up the camera app
Step Two: Hold the device’s camera up to the QR code
Step Three: Your Apple devise will automatically recognise the QR code and
provide you with a link to the video.
How to scan a QR code from an android device
Step One: Download the QR Code reader application from the Play Store.
Step Two: Open the QR code application and open the camera.
Step Three: Your Android devise will automatically recognise the QR code
and provide you with a link to the video.
How to scan a QR code from a Window’s device
Step One: Open up the camera app
Step Two: Hold the device’s camera up to the QR code
Step Three: Your Window devise will automatically recognise the QR code
and provide you with a link to the video.
Please ensure that you devise is up to date with the latest operating system.

ASSEMBLY INSTRUCTIONS
PHONENIX OTTOMAN 4’ BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR
PHOENIX OTTOMAN 4’ BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
WARNING: If this bed is placed on a non-carpeted floor you must place some protection under all legs to
stop the bed frame from moving. If this is not adhered to there is no guarantee if the bed frame
collapses.
WARNING: Take care when assembling the base, assemble the ottoman as close to its final position. The
ottoman has a powerful mechanism and after assembly should only be opened when the bed mattress is
in place.
CARE & MAINTENANCE:
Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
Assemble must be done by two persons.
Page 1of 10
Vendor: S000307

28


 
A  ~渗恁
  怎
C  尸
- ＿
 
E  沪
  
G  守
  
I  多
J  
K   @
L  巴
M  
N  令
。 
p  尸
  吧
R  令
s  
T  庐
u庐
 
w 
X 。
y




 ＿


S000307
 
14
12
2
4
8
16
16 ％
14
4
2
4
8
28
14
4
1
4
30 ％
8
1
1
1
6
30
10
3 10

 

 

FRONT VIEW
9
 
 ;  Y 
BACK VIEW

Y

Vendor: S000307
Step 3: Firstly screw the minifit part A to the top bar (1) as shown and then fix the top bar (1) to the
footboard frame (5) using hardware parts A;then paste the sticker Y.
Page 5 of 10
Y
Attention:Please close to
the headboard side when
assemble the hydraulic base
support !!!
4.2
Step 4: Firstly, fix the hydraulic pump to each hydraulic base as shown in diagram 4.1. Next fix the
left and right hydraulic spacer together with the hydraulic base supports on to both side rails using
bolts H. Ensure Plastic washers (part L) are used between the Hydraulic spacer (part 10) and the
hydraulic base support (parts 18/19) as shown in
the image. Then screw the minifit part A to both
side rails as shown in diagram 4.2.

 
  

 



 
  
                

 


 
 



 


Page 9of 10
Step 11: Adjust the bed base making sure that the distance to the footboard is approximately
15 mm to above. Tighten all bolts and screws now.
Vendor: S000307
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [e-mail] to be
shared in our #birleahome feature on Instagram.
FOOTBOARD
HEADBOARD
15 mm to above

Page 10 of 10
Vendor: S000307
CAUTION :
PLEASE USE HYDRAULIC PUMP STOPPER FOR SAFETY PURPOSE.
HYDRAULIC PUMP
STOPPER
(LOCK IN)
(LOCK OUT)

DON'T LIFT WITHOUT MATTRESS
ENSURE MATTRESS IS ON BEFORE LIFTING
MATTRESS
Important Ottoman Safety Warnings
. Caution. This bed uses a pressurised mechanism.
. Use caution when operating - Always use two hands at arm's length, and only where
illustrated on the proudct.
. You must ensure the mattress is on the bed frame before lifting the mechanism - Failure
to do so may result in injury.
. Please ensure Children and pets are kept away from the bed when operating the bed
mechanism.
. If removing the mattress, make sure that the frame is secured as it could flip open.
. Only use the storage compartment when the frame is fully raised in the 'up' position.
. No children or animals are left unattended when the frame is in the 'up' position.
. Do not remain on the bed whilst the lifting mechanism is in use.
. Beware of Entrapment - Keep both hands clear of mechanism when operating the
mechanism.
. When lifting the bed remove all bedding - Except the fitted sheet.