Birlea CORONA NEST OF TABLES User manual

Vendor: S000238
Page 1 of 7
ASSEMBLY INSTRUCTIONS
CORONA NEST OF TABLES
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR CORONA NEST
OF TABLES.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY INSTRUCTIONS:
Please check contents and read instructions carefully before commencing assembly.
To avoid damages assemble the item on a soft, clean surface.
Assemble in the room of use.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fi ings are secured.
Always use on a level, even surface.
It is recommended that two people handle and assemble the item.
Keep small parts out of the reach of children.
CARE & MAINTENANCE:
This product is manufactured in pine which is a wood with natural characteristics including knots, grains,
clusters or indentations.
On unpacking the item you may notice an odour due to the production process, however, this will disappear
after a period of time.
DO NOT place the item ne t to a radiator or direct sunlight as this item is susceptible to temperature
change. It is recommended to maintain an even room temperature with no sudden fluctuations.
For general cleaning use a duster or damp cloth (almost dry) not wet – do not use soap and water,
detergents, aerosol sprays or any polish as the use of these materials would invalidate any claims.
You may wish to re-treat the surface to maintain the original finish. This can be done using block wa (un-
perfumed). Please follow the manufacturer’s instructions carefully.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor.
Periodically check all screws & fi ings to ensure they are secure.
DO NOT push the item as this will damage the base.
Keep any sharp objects away from the item.
www.birlea.com

Vendor: S000238
Page 2 of 7
Parts List Hardwar List
Part D scription Qty Part D scription Qty
1
Large Table Top
1
A Wooden Dowel 12
2
Medium Table Top
1
B
16 mm Screw
24
3
Small Table Top
1
C 35 mm Screw 12
4
Large Leg
4
D 60 mm Bolt 12
5
Medium Leg
4
E Stud 24
6
Small Leg
4
F Allen Key 1
7
Large Front Rail
1
G Metal Bracket 12
8
Medium Front Rail
1
** You will n d a small mall t and a scr wdriv r.
9
Small Front Rail
1
10
Large Back Rail
1
11
Medium Back Rail
1
12
Small Back Rail
1
13
Large Side Rail
2
14
Medium Side Rail
2
15
Small Side Rail
2

Vendor: S000238
Page 3 of 7
St p 1: Attach the large legs (4) to the large front rail (7), large back rail (10) and large side rails (13).
DO NOT us any pow r tools as this may damag th fram and will invalidat any claim.
St p 2: Attach the medium legs (5) to the medium front rail (8), medium back rail (11) and medium side rails
(14).
DO NOT us any pow r tools as this may damag th fram and will invalidat any claim.

Vendor: S000238
Page 4 of 7
St p 3: Attach the small legs (6) to the small front rail (9), small back rail (12) and small side rails (15).
DO NOT us any pow r tools as this may damag th fram and will invalidat any claim.
St p 4: Secure the table frames using hardware parts B, D, F and G with a screwdriver (not provided).
DO NOT us any pow r tools as this may damag th fram and will invalidat any claim.

Vendor: S000238
Page 5 of 7
St p 5: Insert hardware part A to all frames using a small mallet (not provided).
DO NOT us any pow r tools as this may damag th fram and will invalidat any claim.
St p 6: Attach the large table top (1) using hardware part C and a screwdriver (not provided).
DO NOT us any pow r tools as this may damag th fram and will invalidat any claim.

Vendor: S000238
Page 6 of 7
St p 7: Attach the medium table top (2) using hardware part C and a screwdriver (not provided).
DO NOT us any pow r tools as this may damag th fram and will invalidat any claim.
St p 8: Attach the small table top (3) using hardware part C and a screwdriver (not provided).
DO NOT us any pow r tools as this may damag th fram and will invalidat any claim.

Vendor: S000238
Page 7 of 7
St p 9: Insert hardware part E with a small mallet (not provided).
DO NOT us any pow r tools as this may damag th fram and will invalidat any claim.
Additional Information:
• For complete product information, images and dimension diagrams please visit the website
www.birlea.com
• If you have any issues with your item please contact the retailer directly you purchased it from who
will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be shared in our
#birleahome feature on Instagram.