Black & Decker BXRA43013GB User manual

BXRA43013GBwww.blackanddecker.co.uk
This product is only suitable for well-insulated
spaces or occasional use.

ENGLISH (Original instructions)
2
What’s in the box
Instruction Manual
Oil Filled Radiator
Castor Assembly
Remote Control
Features
1. Handle
2. Air Outlet
3. LED Display
4. Control Panel
5. Fins
6. Foldable Cord
Storage
7. Castor Wheels
Remote Control
1. ON/ Standby Key
2. Heat Setting Key
3. Decrease
4. Timer Key
5. Increase
LED/Control Panel
1. Temperature Icon
2. Temperature/ Time
3. Timer Key
4. Heat Setting Key
5. Decrease
6. Increase
7. ON/ Standby Key
1
1 2
5
3
4
5 6 7
4
2
3
3
4
5
6
7
21
...

ENGLISH
(Original instructions)
3
Intended Use
Your BLACK+DECKER BXRA43013GB 2KW Digital
Oil Filled Radiator has been designed for heating
small and medium spaces.
This appliance is intended for indoor household use
only.
Thank you for choosing BLACK+DECKER. We hope
that you will enjoy using this product for many years.
Safety Instructions
WARNING: Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions listed
below may result in electric shock,
re and/or serious injury.
♦ Read this manual carefully before
using the appliance.
♦ The intended use is described in
this manual.
♦ The use of any accessory or
attachment or the performance of
any operation with this appliance
other than those recommended in
this instruction manual may present
a risk of personal injury.
♦ Retain this manual for future
reference.
♦ WARNING: When using mains-
powered appliances, basic safety
precautions, including the following,
should always be followed to
reduce the risk of re, electric
shock, personal injury and material
damage.
Using Your Appliance
Please read the operating
instructions carefully before using
your oil lled radiator for the rst time.
♦ Check that the voltage of the main
circuit corresponds with the rating
of the appliance before operating.
♦ The heater must not be located
immediately below a socket outlet.
♦ Do not use this heater in the
immediate surroundings of a bath,
a shower or a swimming pool.
♦ In order to avoid overheating, do
not cover the heater.
♦ Do not use this heater if it has been
dropped.
♦ Do not use if there are any visible
signs of damage to the appliance.
♦ This heater is lled with a precise
quantity of special oil. Repairs
requiring opening of the oil
container are only to be made by
the manufacturer or his service
agent who should be contacted if
there is an oil leakage.
♦ Regulations concerning the
disposal of oil when scrapping the
appliance have to be followed.
♦ Children of less than 3 years should
be kept away unless continuously
supervised.
♦ Children between the ages of 3
and 8 years old should only switch
the appliance on or off when it
has been placed and installed
in its intended, normal operating
position and when they have been

ENGLISH (Original instructions)
4
given adequate supervision or
instruction concerning safe use of
the appliance and understand the
hazards involved. Children between
the ages of 3 and 8 years old
should not plug in, regulate, clean
or perform user maintenance on
the appliance.
♦ WARNING: Do not use this
appliance in small rooms when they
are occupied by persons not
capable of leaving the room on
their own, unless constant
supervision is provided.
♦ CAUTION: Some parts of this
product can become very hot and
cause burns. Particular attention
has to be given where children and
vulnerable people are present.
♦ Children shall not play with the
appliance.
♦ Do not let the cable hang over the
edge of a table or counter or let
it come into contact with any hot
surfaces.
♦ The use of accessory attachments
is not recommended by the
appliance manufacturer, apart from
those supplied with this product.
♦ Do not pull the plug out by the
cable as this may damage the plug
and/or the cable.
♦ Do not use this product for anything
other than its intended use.
♦ This appliance is for household use
only.
♦ Do not carry the appliance by the
power cable.
♦ Do not use the appliance outdoors.
♦ Do not operate with wet hands.
♦ Use of an extension cable with this
appliance is not recommended.
However, if it is necessary to use
an extension lead, ensure that
the lead is suited to the power
consumption of the appliance to
avoid overheating of extension
cable, appliance or plug point. Do
not place the extension cable in a
position where it can be pulled on
by children or animals or tripped
over.
♦ Always unplug the unit when not in
use or before cleaning.
♦ The manufacturer does not accept
responsibility for any damage
or injury caused by improper or
incorrect use, or for repairs carried
out by unauthorised personnel.
Safety Of Others
♦ Close supervision is necessary
when any appliance is used by or
near children.
♦ This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand the
hazards involved.

ENGLISH
(Original instructions)
5
♦ Cleaning and user maintenance
should not be undertaken by
children without supervision.
♦ Take care when any appliance is
used near pets.
♦ Do not allow the cord to become
twisted or come into contact with
children.
After Use
♦ Keep this unit clean.
♦ Check all inlets and outlets from
time to time for accumulated dust.
♦ Do not allow objects to enter the
ventilation opening as this may
cause electric shock, or damage to
the unit.
♦ Switch off at the wall socket then
remove the plug from the socket
when not in use, before relocating
or before cleaning.
♦ Switch off, remove the plug from
the socket and let the appliance
cool down before leaving it
unattended and before changing,
cleaning or inspecting any parts of
the appliance.
♦ While cleaning, DO NOT use a wet
cloth or use water on any part of
the unit, as this may cause a short
circuit or electrical shock.
♦ When not in use, the appliance
should be stored in a dry place.
Children should not have access to
stored appliances.
Inspections And Repairs
♦ Do not attempt to dismantle, repair
or remould any part of the unit. This
should only be done by a qualied
service agent. Even the change of
power cable should be done by a
qualied person.
♦ In the unlikely event the appliance
develops a fault, stop using it
immediately and seek advice from
the manufacturer.
♦ In case of technical problems,
switch off the product and do not
attempt to repair it yourself. Return
the appliance to an authorised
service facility for examination,
adjustment or repair. Always
insist on the use of original spare
parts. Failure to comply with the
above mentioned precautions and
instructions, could affect the safe
operation of this product.
Additional Safety Instructions for
This Appliance
♦ Always operate the appliance on a
smooth, even, stable surface. Do
not place the unit on a hot surface.
♦ Ensure that the unit is switched off
after use.
♦ Do not immerse cables, plugs or
any part of the appliance in water
or any other liquid.
♦ Operate the unit only at the voltage
specied.
♦ Do not use the unit near open
windows, as contact with rain and

ENGLISH (Original instructions)
6
other natural elements could cause
an electrical hazard
♦ Do not put heavy objects on the
appliance.
♦ Do not tip the unit on its side.
♦ Never insert any other object into
the unit body to avoid any hazard
or unit failure.
♦ Do not put the unit close to
heat-generating devices or
near ammable and dangerous
materials.
♦ If the supply cable is damaged,
it must be replaced by the
manufacturer or its service agent or
a similarly qualied person in order
to avoid a hazard.
♦ For optimal airow circulation,
leave a distance of at least 1 metre
around the appliance on every side.
Always direct the airow in order
to optimise heating. Avoid corners,
small objects and other surfaces
or objects which may impede the
airow.
♦ The appliance must be positioned
so that the plug is accessible.
♦ Always turn the heater off and
unplug it from the mains before
attempting to move it.
♦ This heater is lled with a precise
quantity of special oil. Repairs
to the oil container should only
be made by the manufacturer a
qualied service agent. When
disposing of the heater, take care
to follow regulations concerning the
disposal of oil.
♦ In case of an oil leak, please
contact the manufacturer a
qualied service agent
♦ WARNING: Do not place the unit
on or near a hot gas electric burner.
Electrical safety
WARNING: Before use, check that the mains
voltage corresponds to the voltage on the rating
plate.
This product must be earthed. Always
check that the mains voltage
corresponds to the voltage on the rating
plate.
♦Appliance plugs must match the outlet. Never
modify the plug in any way.
♦Do not use any adapter plugs with earthed (Class
1) appliances. Unmodied plugs and matching
outlets will reduce the risk of electric shock.
♦To avoid the risk of electric shock, do not immerse
the cord, plug or appliance in water or other liquid.
Extension cables
♦Up to 30m (100 ft) can be used without loss of
power.
♦If the supply cord is damaged, it must be
replaced by the manufacturer or an authorised
BLACK+DECKER Service Centre in order to avoid
a hazard.
WARNING: Before assembling, switch the
appliance off and remove the plug from the socket.
Mains plug replacement
WARNING: The above section on mains plug
replacement is for authorized service centre
persons.
If a new mains plug needs to be tted:
♦Safely dispose of the old plug.
♦Connect the brown lead to the live terminal in the
new plug.
♦Connect the blue lead to the neutral terminal.
♦If the product is class I (earthed), connect the
green/yellow lead to the earth terminal.
Note! If your product is class II double insulated
(only 2 wires in the cord set), no connection is to be

ENGLISH
(Original instructions)
7
made to the earth terminal.
Follow the tting instructions supplied with good
quality plugs. Any replacement fuse must be of the
same rating as the original fuse supplied with the
product.
Labels on Appliance
The following pictograms along with the date code
are shown on the appliance:
WARNING: Hot surface
WARNING: Do not cover
WARNING: Before assembling, switch the
appliance off and remove the plug from the socket.
Features
1. Handle
2. Air Outlet
3. LED Display
4. Control Panel
5. Fins
6. Foldable Cord Storage
7. Castor Wheels
Assembly
♦ To use the unit, start by attaching the castors.
♦ Turn the heater upside down.
♦ Align the mounting holes of a castor bracket
assembly with the U shaped bracket. Secure the
castor assembly with two buttery nuts.
♦ Align the mounting holes of the other castor
bracket assembly and lower on to the screws of
the castor pad plate at the bottom of the radiator.
♦ Secure the castor assembly bracket with the
buttery nuts.
♦ Once the buttery nuts are tightened turn the
appliance upright on to the castors.
♦ The unit is now ready for normal use.
Use
About the Controls
♦ Adjustable thermostat
♦ 3 heat settings
♦ Programmable 24 hour timer
Inserting the Batteries
This unit can be operated through its built-in control
panel or through the included remote control.
♦ To make use of the unit’s remote functionalities,
start by inserting the batteries into the remote
control.
♦ To install the batteries, rst detach the battery
cover from the remote. To do this, place a thumb
or small object, on the grooved area at the top of
the battery cover and push it gently downwards
and away from the body of the remote.
♦ Insert 2 x AAA batteries into the battery
compartment, taking care to ensure the polarities
are correct.
♦ Once the batteries are in place, slide the battery
cover back into the remote. It will automatically
lock into place and secure the batteries inside.
NOTE: Ensure the battery cover is rmly secured
into place before attempting to use the remote.
♦ Your remote control is now ready for use.
WARNING: Battery acid leakage can cause
personal injury and cause damage to the product
and surrounding property.
If battery leakage occurs, thoroughly wash any
affected skin, making sure to keep battery acid away
from eyes, ears, nose and mouth. Immediately wash
any clothing or other surface that comes in contact
with leaked battery acid.
If a chemical burn occurs or if irritation persists, seek
medical attention.
Dispose according to Local regulations.

ENGLISH (Original instructions)
8
WARNING: NEVER mix old and new batteries or
different brands of batteries. Replace all batteries at
the same time.
NEVER mix alkaline, standard (carbon-zinc),
rechargeable (nickel-cadmium) batteries with this
product.
NEVER dispose of batteries in re, as they may leak
and explode.
Batteries (battery pack or batteries installed) shall
not be exposed to excessive heat such as sunshine
or re or any other heat sources.
Batteries are to be inserted following the polarity
markings on the product.
ALWAYS remove exhausted batteries from product.
Remove batteries before extended storage.
Turning the Unit On or Off
♦ To power the unit on, begin by plugging it into the
mains. There will be a sound prompt to indicate
the unit has been plugged in and is in stand-by
mode. The right hand bar on the LED display will
illuminate.
♦ Once the unit has been plugged in, press the ON/
Stand-by key to enter working mode. There will
be a sound prompt and the unit’s LED screen will
come on to show the unit has been brought out of
Standby mode.
WARNING: DO NOT touch any part of the heater
other than the front panel while it is in operation, as it
will be very hot and there will be a risk of burns.
♦ Press the On/Standby key again while the unit is
in operation to put it into Standby mode. There will
be a sound prompt and the unit’s LED screen will
go out to show the unit has been put into Standby
mode. The right hand bar on the LED display will
illuminate.
♦ To turn the unit off completely unplug the unit from
the mains socket.
WARNING: DO NOT store the unit directly after
turning it off. Allow for time for the ns to cool down
before storing.
Heat Setting Selection
♦ This heater is equipped with 3 heat settings (Low,
Medium and High).
♦ When the unit is powered on, press the heat
setting key to cycle between the available heat
settings. The indicator bars on the LED display will
illuminate to indicate the setting selected:
1 bar – Low – 800W
2 bars- Medium – 1200W
3 bars – High – 2000W
NOTE:The unit will store to memory the setting
before being switched off (except as a result of
power failure). It does not store the timing settings.
Temperature Selection
♦ This heater is equipped with an adjustable
thermostat, which allows for temperature control
within each of the 3 heat settings.
♦ Short press the +/- keys to increase/ decrease
in increments of 1 degree or press and hold to
change the temperature at a greater speed.
♦ The temperature icon will illuminate when the
heating function is active.
♦ The temperature range available is 7-35oC.
♦ When the room temperature reaches the set
temperature required (+1degree) the unit will
switch to stand-by mode.
NOTE: Once the temperature has been manually
set, it will be stored in the unit’s internal memory.
If the unit is put into standby mode, when it is next
turned on, it will automatically default to the most
recently selected settings.
Activating the Shut Off Timer
♦ The unit is equipped with a programmable 24 hour
automatic shut-off timer.
♦ When the unit is in working mode press the Timer
key to activate the timer.
♦ Once the timer has been activated, press the
increase/decrease keys to pre-set the duration of
the heating cycle, from 0 to 24 hours.
♦ Short press to increase in increments of 1hour.
♦ Press and hold to quickly change the time
duration required.
♦ The Timer bar will ash whilst a time is being
selected. (the bar to the left of the LED).
♦ When no further adjustment is made, after 5
seconds, the Timer bar will remain illuminated to
conrm a timing setting is in operation and the
display will show the ambient room temperature
set. Alternatively once the timing has been
selected press the Timer key to conrm the setting
immediately.
♦ During operation press the Timer key to check the
time left.
♦ The unit will switch off to stand-by mode once the
duration set has ended.

ENGLISH
(Original instructions)
9
Activating the Start Timer
♦ The unit is equipped with a programmable 24 hour
automatic operation start timer.
♦ When the unit is in stand-by mode press the timer
key to activate the start time.
♦ Once the start timer has been activated, press
the increase/decrease keys to pre-set when the
heating cycle is to start, from 0 to 24 hours.
♦ Short press to increase in increments of 1hour.
♦ Press and hold to quickly change the start time
required.
♦ Press the Timer key again to conrm the setting.
Alternatively, if no further adjustment is made,
after 5 seconds, the Timer bar will remain
illuminated to conrm a setting is in operation and
the display will show the time remaining until the
unit starts operation.
♦ The Timer bar will ash whilst a time is being
selected.
♦ Once the timer has set press the Timer key to
check the remaining time until the appliance is
due to start operation. The timer can be re-set at
any time.
Memory Function
♦ When the appliance is re-activated it will operate
according to the status before the last standby.
Over Heating Safety Protection Function
♦ When the indoor ambient temperature exceeds
50°C, whether in standby or working mode, all out
puts are turned off and there will be an audible
signal. The LED screen display will ash “FF” for
75 seconds. As long as there is protection, and
even if the ambient temperature is less than 50°C,
operation cannot be resumed until the power is
turned off and on again.
Tip over function
♦ When the angle between the unit and the
horizontal position is less than 30±5 degrees, the
display will ash “Eo” and the unit will turn off.
♦ When the unit is righted and the angle between
the unit and the horizontal position is greater than
70±5 degrees, the unit will resume working in the
state before tip over.
Cleaning and maintenance
WARNING: Before cleaning and maintenance,
switch the appliance off and remove the plug from
the socket, to prevent electric shock.
♦ Do not immerse any part of the appliance, power
cord or plug in liquids.
♦ Clean the appliance regularly to aid radiating
efciency.
♦ Use a soft damp cloth to wipe the surface. Avoid
using detergent, spray or chemicals or sharp,
abrasive tools as these may cause damage to the
appliance.
Cord Storage
♦ The unit is complete with integrated cord storage
in the front panel. Press each bracket to open.
Push back in place when not required.
♦ To safely store the power cord, wind it around the
cord storage bracket before storing the unit.
Storing the Unit
WARNING: Ensure the unit has fully cooled down
before storing.
♦ Before storing the unit, wind the power cord
around the cord storage bracket located on the
front panel.
♦ Store in a cool, dry place, out of the reach of
children.
Protecting the environment
Separate collection. Products and
batteries marked with this symbol must
not be disposed of with normal household
waste.
Products and batteries contain materials that can
be recovered or recycled, reducing demand for
raw materials. Please recycle electrical products
and batteries according to local provisions. Further
information is available at www.2helpU.com.

ENGLISH (Original instructions)
10
Technical data
BXRA43013GB
Input voltage V AC 220 - 240
Frequency Hz 50
Power input W2000
Weight KG 9.5
Product Guarantee
This product comes with a 2 Year guarantee from the
original date of purchase. If any defect arises due to
faulty materials of workmanship, the faulty products
must be returned to the place of purchase. Refund or
replacement is at the discretion of the retailer. This
guarantee is in addition to and in no way prejudices
your statutory rights.
The Following Conditions Apply:
♦ The product must be returned to the retailer
with proof of purchase or a receipt within the
1st year of purchase. For any product related
issues after 12 months please contact our
customer services team.
♦ The product must be installed and used in
accordance with the instructions contained in
this instruction guide.
♦ It must be used only for domestic purposes.
♦ It does not cover wear and tear, damage,
misuse or consumable parts.
♦ This guarantee is valid in the UK and Republic
of Ireland.
For all customer service enquires please contact
us below;
RKW,
Sutton House,
Berry Hill Road,
Stoke-on-Trent,
ST4 2NL
Email [e-mail]
Tel [phone]
Black & Decker® and BLACK+DECKER™ and the
Black & Decker® and BLACK+DECKER™ logos
are registered trademarks of The Black & Decker®
Corporation and are used under licence. All rights
reserved. Imported and Distributed by RKW LTD,
Sutton House, Berry Hill Industrial Estate, Berry Hill
Road, Stoke-on-Trent, ST4 2NL

ENGLISH
(Original instructions)
11
Model Identier(s): BXRA43013GB
Item Symbol Value Unit Item Unit
Heat Output Type of heat input for electric storage, local space
heaters only (select one)
Nominal heat
output Pnom 0.8 kW Manual heat charge with integrated thermostat No
Minimum heat
output (indicative) Pmin 0.7 kW Manual heat charge control with room and/or outdoor temperature feedback No
Maximum
continuous heat
output
Pmax, c 0.8 kW Electronic heat charge control with room
and/or outdoor temperature feedback No
Auxiliary electricity
consumption Fan assisted heat output No
At nominal heat
output elmax 0.000 kW Type of heat output/room temperature control (select one)
At minimum heat
output elmin 0.000 kW Single stage heat output and no room temperature control No
In standby mode eISB 0.217 kW Two or more manual stages, no room
temperature control No
Heat output With mechanic thermostat room
temperature control No
Nominal heat
output Pnom N/A kW With electronic room temperature control Yes
Minimum heat
output (indicative) Pmin N/A Electronic room temperature control plus day timer No
Maximum
continuous heat
output
Pmax, c N/A Electronic room temperature control plus
week timer No
Auxiliary electricity
consumption Other control options (multiple selections possible)
At nominal heat
output elmax N/A Room temperature control with presence detection No
At minimum heat
output elmin N/A Room temperature control with open
window detection No
In standby mode eISB N/A With distance control option No
With adaptive start control No
With working time limitation Yes
With black bulb sensor No
Contact Details: RKW LTD, Sutton House, Berry Hill Industrial Estate, Berry Hill Road,
Stoke-on-Trent, ST4 2NL

07/2021