Black & Decker KR703 User manual

KR703/KR704
KR753/KR803
www.blackanddecker.ae

ENGLISH
2
5
7
1
2
3
4
8
6

3
ENGLISH
7
8
10 6
9
6
12
13
10 11
A
BC
D

4
ENGLISH
Intended use
Your Black & Decker impact drill has been
designed for drilling in wood, metal, plastics, and
masonry as well as for screwdriving purposes.
This tool is intended for consumer use only.
Safety instructions
General power tool safety warnings
Warning! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in all of the warnings
listed below refers to your mains operated
(corded) power tool or battery operated
(cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c. Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
c. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
e. When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the influence of drugs, alcohol or
medication.Amoment of inattention while
operating power tools may result in serious
personal injury.
b. Use personal protective equipment.Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.

5
ENGLISH
c. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your finger on the switch or energising
power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before
turning the power tool on.Awrench or a key
left attached to a rotating part of the power
tool may result in personal injury.
e. Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes,
jewellery or long hair can be caught in
moving parts.
g. If devices are provided for the connection of
dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
b. Do not use the power tool if the switch does
not turn it on and off.Any power tool that
cannot be controlled with the switch is
dangerous and must be repaired.
c. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk
of starting the power tool accidentally.
d. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
e. Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g. Use the power tool, accessories and tool bits
etc., in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous
situation.
5. Service
a. Have your power tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Additional power tool safety
warnings
Additional safety warnings for drills and
impact drills

6
ENGLISH
•Wear ear protectors with impact drills.
Exposure to noise can cause hearing loss.
•Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
•Hold power tool by insulated gripping
surfaces when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live"
and shock the operator.
•Use clamps or another practical way to
secure and support the workpiece to a stable
platform. Holding the work by hand or
against your body leaves it unstable and may
lead to loss of control.
•Before drilling into walls, floors or ceilings,
check for the location of wiring and pipes.
•Avoid touching the tip of a drill bit just after
drilling, as it may be hot.
•This tool is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should
be supervised to ensure that they do not play
with the appliance.
•The intended use is described in this
instruction manual. The use of any accessory
or attachment or performance of any
operation with this tool other than those
recommended in this instruction manual may
present a risk of personal injury and/or
damage to property.
Vibration
The declared vibration emission values stated in
the technical data and the declaration of
conformity have been measured in accordance
with a standard test method provided by EN
60745 and may be used for comparing one tool
with another.The declared vibration emission
value may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which
the tool is used. The vibration level may
increase above the level stated.
When assessing vibration exposure to
determine safety measures required by
2002/44/EC to protect persons regularly using
power tools in employment, an estimation of
vibration exposure should consider, the actual
conditions of use and the way the tool is used,
including taking account of all parts of the
operating cycle such as the times when the tool
is switched off and when it is running idle in
addition to the trigger time.
Labels on tool
The following pictograms are shown on the tool:
Warning! To reduce the risk of injury,
the user must read the instruction
manual.
Electrical safety
This tool is double insulated; therefore
no earth wire is required.Always check
that the power supply corresponds to the voltage
on the rating plate.

7
ENGLISH
•If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised Black & Decker Service Centre in
order to avoid a hazard.
Features
This tool includes some or all of the following
features.
1. Variable speed switch
2. Lock-on button
3. Variable speed control switch
4. Forward/reverse slider
5. Drilling mode selector
6. Chuck
7. Depth stop
8. Side handle
Assembly
Warning! Before assembly, make sure that the
tool is switched off and unplugged.
Fitting the side handle and
depth stop (fig.A)
•Turn the grip counterclockwise until you can
slide the side handle (8) onto the front of the
tool as shown.
•Rotate the side handle into the desired
position.
•Insert the depth stop (7) into the mounting
hole as shown.
•Set the drilling depth as described below.
•Tighten the side handle by turning the grip
clockwise.
Fitting a drill bit or screwdriver
bit (fig. B & C)
Keyless chuck with spindle lock (fig. B)
•Open the chuck by turning the sleeve (9)
counterclockwise.
•Insert the bit shaft (10) into the chuck.
•Tighten the chuck by turning the sleeve
clockwise.
Keyed chuck (fig. C)
•Open the chuck by turning the sleeve (11)
counterclockwise.
•Insert the bit shaft (10) into the chuck.
•Insert the chuck key (12) into each hole (13)
in the side of the chuck and turn clockwise
until tight.
Removing and refitting the
chuck (fig. D)
•Open the chuck as far as possible.
•Remove the chuck retaining screw, located in
the chuck, by turning it clockwise using a
screwdriver.
•Tighten anAllen key into the chuck and strike
it with a hammer as shown.
•Remove theAllen key.
•Remove the chuck by turning it
counterclockwise.
•To refit the chuck, screw it onto the spindle
and secure it with the chuck retaining screw.
Residual risks.
Additional residual risks may arise when using
the tool which may not be included in the
enclosed safety warnings. These risks can arise
from misuse, prolonged use etc.

8
ENGLISH
Even with the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks can not be
avoided. These include:
•Injuries caused by touching any
rotating/moving parts.
•Injuries caused when changing any parts,
blades or accessories.
•Injuries caused by prolonged use of a tool.
When using any tool for prolonged periods
ensure you take regular breaks.
•Impairment of hearing.
•Health hazards caused by breathing dust
developed when using your tool (example:-
working with wood, especially oak, beech
and MDF.)
Use
Warning! Let the tool work at its own pace. Do
not overload.
Warning! Before drilling into walls, floors or
ceilings, check for the location of wiring and
pipes.
Selecting the direction of
rotation
For drilling and for tightening screws, use
forward (clockwise) rotation. For loosening
screws or removing a jammed drill bit, use
reverse (counterclockwise) rotation.
•To select forward rotation, push the
forward/reverse slider (4) to the left.
•To select reverse rotation, push the
forward/reverse slider to the right.
Warning! Never change the direction of rotation
while the motor is running.
Selecting the drilling mode
•For drilling in masonry, set the drilling mode
selector (5) to the position.
•For drilling in other materials and for
screwdriving, set the drilling mode selector
(5) to the position.
Setting the drilling depth (fig.A)
•Slacken the side handle (8) by turning the
grip counterclockwise.
•Set the depth stop (7) to the desired position.
The maximum drilling depth is equal to the
distance between the tip of the drill bit and
the front end of the depth stop.
•Tighten the side handle by turning the grip
clockwise.
Switching on and off
•To switch the tool on, press the variable
speed switch (1). The tool speed depends on
how far you press the switch. If the tool has a
variable speed control knob (3), set it to the
required speed range.As a general rule, use
low speeds for large diameter drill bits and
high speeds for smaller diameter drill bits.
•For continuous operation, press the lock-on
button (2) and release the variable speed
switch. This option is available only at full
speed or at any speed preset with the
variable speed control knob (3). This option
does not work in reverse rotation.
•To switch the tool off, release the variable
speed switch. To switch the tool off when in
continuous operation, press the variable
speed switch once more and release it.

9
ENGLISH
Accessories
The performance of your tool depends on the
accessory used. Black & Decker and Piranha
accessories are engineered to high quality
standards and designed to enhance the
performance of your tool. By using these
accessories you will get the very best from your
tool.
Maintenance
Your tool has been designed to operate over a
long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular
cleaning.
Warning! Before performing any maintenance,
switch off and unplug the tool.
•Regularly clean the ventilation slots in your
tool using a soft brush or dry cloth.
•Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner.
Mains Plug Replacement
If a new mains plug needs to be fitted:
•Safely dispose of the old plug.
•Connect the brown lead to the live terminal of
the new plug.
•Connect the blue lead to the neutral terminal.
•If the product is class l (earthed), connect the
green / yellow lead to the earth terminal.
Warning! If your product is class ll double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs.
Any replacement fuse must be of the same
rating as the original fuse supplied with the
product.
Technical Data
KR703 KR704
Typ. 2 Typ. 1
Input voltage VAC 220-240 220-240
Power input W 710 710
No-load speed min-1 0-3,100 0-3,100
Max drilling capacity
Steel/concrete mm 13/16 13/16
Wood mm 32 32
Weight kg 2.11 2.11
KR753 KR803
Typ. 2 Typ. 1
Input voltage VAC 220-240 220-240
Power input W 750 800
No-load speed min-1 0-3,100 0-3,100
Max drilling capacity
Steel/concrete mm 13/16 13/16
Wood mm 32 32
Weight kg 2.11 2.11

10
ENGLISH
Protecting the environment
Separate collection. This product must not
be disposed of with normal household
waste.
Should you find one day that your Black &
Decker product needs replacement, or if it is of
no further use to you, do not dispose of it with
other household waste. Make this product
available for separate collection.
•Black & Decker provides a facility for
recycling Black & Decker products once they
have reached the end of their working life.
This service is provided free of charge. To
take advantage of this service please return
your product to any authorised repair agent
who will collect them on our behalf.
•You can check the location of your nearest
authorised repair agent by contacting your
local Black & Decker office at the address
indicated in this manual.Alternatively, a list of
authorized Black & Decker repair agents and
full details of our after-sales service and
contact are available on the Internet at:
www.2helpU.com.
Warranty
If a Black & Decker product becomes defective
due to a material or manufacturing defect , within
12 months from the date of purchase, Black &
Decker guarantees to replace defective parts or
replace such products to ensure minimum
inconvenience to the customer unless:
•The product has been subjected to misuse or
neglect.
•The product has sustained damage through
foreign objects, substances or accidents.
•Repairs have been attempted by persons
other than authorised repair agents or Black
& Decker service staff.
To claim on the warranty, you will need to submit
proof of purchase to the seller or an authorised
repair agent. You can check the location of your
nearest authorised repair agent by contacting
your local Black & Decker office at the address
indicated in this manual.Alternatively, a list of
authorised Black & Decker repair agents and full
details of our after-sales service and contacts are
available on the Internet at: www.2helpU.com.
Please visit our website www.blackanddecker.ae
to register your new Black & Decker product and
to be kept up to date on new products and
special offers. Further information on the Black &
Decker brand and our range of products is
available at www.blackanddecker.ae.

11
ARABIC
5
7
1
2
3
4
8
6

7
8
10 6
9
6
12
13
10 11
A
BC
D
12
ARABIC

13
ARABIC
ΩGóîà°S’G ¢VôZ
Ö°ûÿG Ö≤ãd ºª°üe ôµjO ófCG ∑ÓH »eó°üdG ÜÉ≤ãŸG
¢VGôZCG øY kÓ°†a ,ÊÉÑŸG ¿GQóLh ∂«à°SÓÑdGh ¿OÉ©ŸGh
.§≤a ∂∏¡à°ùŸG ΩGóîà°S’ ºª°üe RÉ¡÷G Gòg .»ZGÈdG ™aO
áeÓ°ùdG äGOÉ°TQEG
á«FÉHô¡µdG Iõ¡LC’G áeÓ°S ¢Uƒ°üîH áeÉ©dG äGôjòëàdG
áeÓ°ùdG äGôjò– áaÉc IAGôb »¨Ñæj !ôjò–
áaÉc ´ÉÑJG ΩóY ÖÑ°ùàj ób .äGOÉ°TQE’G áaÉch
‘ √ÉfOCG IOQGƒdG äGOÉ°TQE’Gh äGôjòëàdG
¢Vô©àdG hCG/h ≥jôM ܃°ûfh á«FÉHô¡c áeó°üH áHÉ°UE’G
.IÒ£N áHÉ°UE’
´ƒLô∏d äGOÉ°TQE’Gh äGôjòëàdG áaɵH ®ÉØàM’G ≈Lôj
.kÓÑ≤à°ùe É¡«dEG
äGôjòëàdG áaÉc ‘ OQGƒdG "»FÉHô¡c RÉ¡L"í∏£°üŸG
πª©j …òdG »FÉHô¡µdG RÉ¡÷G ¤EG Ò°ûj √ÉfOCG IQƒcòŸG
…òdG »FÉHô¡µdG RÉ¡÷G hCG (Ék«µ∏°S) »FÉHô¡µdG QÉ«àdÉH
.(Ék«µ∏°S’) ájQÉ£ÑdÉH πª©j
πª©dG á≤£æe áeÓ°S .1
ø°ùMh πª©dG á≤£æe áaɶf ≈∏Y ®ÉØ◊G »¨Ñæj .CG
‘ áª∏¶ŸG hCG á¶àµŸG ≥WÉæŸG ÖÑ°ùàJ .É¡JAÉ°VEG
.çOGƒM ´ƒbh
πãe ;ájQÉéØfG AGƒLCG ‘ á«FÉHô¡µdG Iõ¡LC’G π¨°ûJ ’ .Ü
hCG äGRÉZ hCG ∫É©à°TÓd á∏HÉb πFGƒ°S OƒLh ‘ É¡∏«¨°ûJ
…ODƒj ób QöT É¡æY èàæj á«FÉHô¡µdG Iõ¡LC’G .QÉÑZ
.áæNOC’G hCG QÉѨdG ∫É©°TEG ¤EG
RÉ¡÷G 𫨰ûJ AÉæKCG IQÉŸGh ∫ÉØWC’G OÉ©HEG »¨Ñæj .ê
Iô£«°ù∏d ∂fGó≤a ‘ AÉ¡dE’G ÖÑ°ùàj ób .»FÉHô¡µdG
.RÉ¡÷G ≈∏Y
á«FÉHô¡µdG áeÓ°ùdG .2
QÉ«àdG Qó°üe ™e »FÉHô¡µdG QÉ«àdG ¢ùHGƒb ≥aGƒJ Ωõ∏j .CG
,á≤jôW ájCÉH ¢ùHÉ≤dG πjó©J Ék≤∏£e ÖæŒ .»FÉHô¡µdG
.á°VQDƒŸG Iõ¡LC’G ™e ÅjÉ¡e ¢ùHGƒb ájCG Ωóîà°ùJ ’h
QÉ«àdG QOÉ°üeh ádó©ŸG ÒZ ¢ùHGƒ≤dG …ODƒJ ±ƒ°S
áeó°üd ¢Vô©àdG ô£N π«∏≤J ¤EG á≤aGƒàŸG »FÉHô¡µdG
.á«FÉHô¡c
Ö«HÉfC’G πãe á°VQDƒŸG í£°SCÓd º°ù÷G á°ùeÓe ÖæŒ .Ü
ô£N OGOõj .äÉLÓãdGh óbGƒŸGh ICÉaóŸG Iõ¡LCGh
.É k °VQDƒe ∂ª°ùL ¿Éc GPEG á«FÉHô¡c áeó°üH ∂àHÉ°UEG
.áÑWôdG AGƒLC’G hCG ô£ª∏d á«FÉHô¡µdG Iõ¡LC’G ¢Vô©J ’ .ê
IOÉjR ¤EG »FÉHô¡µdG RÉ¡é∏d AÉŸG π∏îJ …ODƒj ±ƒ°S
.á«FÉHô¡c áeó°üH áHÉ°UE’G ô£N
’ .»FÉHô¡µdG QÉ«àdG ∂∏°S ∫ɪ©à°SG IAÉ°SEG ΩóY »¨Ñæj .O
RÉ¡÷G πª◊ »FÉHô¡µdG QÉ«àdG ∂∏°S Ék≤∏£e Ωóîà°ùJ
®ÉØàM’G »¨Ñæj .QÉ«àdG øY π°üa hCG Öë°S hCG »FÉHô¡µdG
hCG âjõdG hCG IQGô◊G øY Gkó«©H »FÉHô¡µdG QÉ«àdG ∂∏°ùH
∑Ó°SC’G ójõJ .ácôëàŸG AGõLC’G hCG IOÉ◊G ±Gƒ◊G
áeó°üH áHÉ°UE’G ô£N øe áµHÉ°ûàŸG hCG áØdÉàdG
.á«FÉHô¡c
Ωóîà°SG ,≥∏£dG AGƒ¡dG ‘ »FÉHô¡µdG RÉ¡÷G 𫨰ûJ óæY .g
.≥∏£dG AGƒ¡dG ‘ ΩGóîà°SÓd Ö°SÉæe π«°UƒJ ∂∏°S
‘ ΩGóîà°SÓd Ö°SÉæe »FÉHô¡c QÉ«J ∂∏°S ΩGóîà°SG
.á«FÉHô¡c áeó°üd ¢Vô©àdG ô£N øe π∏≤j ≥∏£dG AGƒ¡dG
¿Éµe ‘ »FÉHô¡µdG RÉ¡÷G 𫨰ûJ ÖæŒ Qò©J GPEG.h
QÉ«àdG øe ájÉbh RÉ¡L ΩGóîà°SG »¨Ñæj ¬fEÉa ,ÖWQ
»≤ÑàŸG QÉ«àdG øe ájÉbƒdG RÉ¡L ΩGóîà°SG π∏≤j .»≤ÑàŸG
.á«FÉHô¡c áeó°üH áHÉ°UE’G ô£N øe
á«°üî°ûdG áeÓ°ùdG .3
º«∏°ùdG ¢ù◊G Ωóîà°SGh ¬∏©ØH Ωƒ≤J Ée ÖbGQh Ék¶≤j øc .CG
Ωóîà°ùJ ’ .»FÉHô¡µdG RÉ¡÷G 𫨰ûàH Ωƒ≤J ÉeóæY
ÒKCÉJ â– hCG Ékµ¡æe ¿ƒµJ ÉeóæY »FÉHô¡µdG RÉ¡÷G
ÖÑ°ùàJ ób .AGhódG hCG á«dƒëµdG äÉHhöûŸG hCG ÒbÉ≤©dG
‘ á«FÉHô¡µdG Iõ¡LC’G 𫨰ûJ AÉæKCG á∏بdG øe á¶◊
.á¨dÉH á«°üî°T áHÉ°UEG çhóM
m ¥Gh ÉkehO …óJQG .á«°üî°ûdG ájÉbƒdG äGó©e Ωóîà°SG .Ü
äÉeɪc πãe ájÉbƒdG äGó©e ΩGóîà°SG π∏≤j ±ƒ°S .Ú©∏d
áÑ∏°üdG á©Ñ≤dGh ≥∏Mõà∏d á©fÉŸG ájòMC’Gh áHôJC’G
.á«°üî°T äÉHÉ°UEG çhóM ô£N øe ™ª°ùdG »bGhh
¿CG øe ócCÉJ .Oƒ°ü≤ŸG ÒZ 𫨰ûàdG AóH ™æe Ú©àj .ê
QÉ«àdG Qó°üà π«°UƒàdG πÑb ≥∏¨dG ™°Vh ‘ ìÉàØŸG
πªM hCG ™aQ hCG äÉjQÉ£ÑdG IóMh hCG/h »FÉHô¡µdG
™HÉ°UC’Gh á«FÉHô¡µdG Iõ¡LC’G πªM …ODƒj .RÉ¡÷G
á«FÉHô¡µdG Iõ¡LC’G πªM hCG ,ìÉàØŸG ≈∏Y áYƒ°Vƒe
.çOGƒM ´ƒbh ¤EG ,𫨰ûàdG ™°Vh ‘ ¿ƒµJ »àdG ᣰûædG

14
ARABIC
𫨰ûJ πÑb …õ«∏‚EG ìÉàØe hCG …OÉY ìÉàØe …CG ∫RCG.O
Ék`≤∏©àe ìÉàØŸG ∑ôJ ÖÑ°ùàj ób .»FÉHô¡µdG RÉ¡÷G
áHÉ°UEG çhóM ‘ »FÉHô¡µdG RÉ¡÷G øe QGhódG Aõ÷ÉH
.á«°üî°T
≈∏Y ®ÉØ◊G »¨Ñæj . .•ôØŸG ÜGÎb’G ÖæŒ »¨Ñæj .g
∂æµÁ Gò¡a .äÉbhC’G áaÉc ‘ ¿GõJ’Gh Úeó≤dG äÉÑK
‘ »FÉHô¡µdG RÉ¡÷G ≈∏Y Ió«÷G Iô£«°ùdG øe
.á©bƒàŸG ÒZ ∞bGƒŸG
¢ùHÓŸG …óJôJ ’ .áÑ°SÉæŸG ¢ùHÓŸG AGóJQG »¨Ñæj .h
∑ô©°T ≈∏Y ®ÉØ◊G »¨Ñæj .äGôgƒéŸG hCG á°VÉØ°†ØdG
ób .ácôëàŸG AGõLC’G øY Gkó«©H ∂JGRÉØbh ∂°ùHÓeh
ô©°ûdG hCG äGôgƒéŸG hCG á°VÉØ°†ØdG ¢ùHÓŸG ≥∏©J
.ácôëàŸG AGõLC’ÉH πjƒ£dG
êGôîà°SG ¢Uƒ°üîH Iôaƒe Iõ¡LCG ∑Éæg âfÉc GPEG.R
Iõ¡LC’G ∂∏J π«°UƒJ øe ócCÉJ ,™ª÷G ≥aGôeh QÉѨdG
ΩGóîà°SG π∏≤j ¿CG øµÁ .Ö°SÉæŸG πµ°ûdÉH É¡eGóîà°SGh
.QÉѨdÉH á£ÑJôŸG ôWÉîŸG çhóM øe Iõ¡LC’G ∂∏J
¬H ájÉæ©dGh »FÉHô¡µdG RÉ¡÷G ΩGóîà°SG .4
¢VôZ ‘ »FÉHô¡µdG RÉ¡÷G ΩGóîà°SG ÖæŒ Ú©àj .CG
Ö°SÉæŸG »FÉHô¡µdG RÉ¡÷G Ωóîà°SG .Ö°SÉæe ÒZ
RÉ¡÷G Ωƒ≤j ±ƒ°S .√ójôJ …òdG ΩGóîà°S’Gh ¢Vô¨∏d
ÌcCGh π°†aCG πµ°ûH πª©dG AGOCÉH í«ë°üdG »FÉHô¡µdG
.¬∏LCG øe ¬ª«ª°üJ ” …òdG ∫ó©ŸÉH ÉkfÉeCG
ìÉàØŸG º≤j ⁄ kGPEG »FÉHô¡µdG RÉ¡÷G Ωóîà°ùJ ’ .Ü
øµÁ ’ »FÉHô¡c RÉ¡L …CG .¬∏«¨°ûJ ±É≤jEGh ¬∏«¨°ûàH
»¨Ñæjh Gkô£N ¿ƒµj ìÉàØŸG ΩGóîà°SÉH ¬«a ºµëàdG
.¬MÓ°UEG
QÉ«àdG Qó°üe øY »FÉHô¡µdG RÉ¡÷G ¢ùHÉb π°üaG .ê
ájCG AGôLEG πÑb äÉjQÉ£ÑdG IóMh øY hCG/h »FÉHô¡µdG
‘ äÉ≤ë∏e ájCG Ö«côJ hCG äGÒ«¨J hCG äÓjó©J
äGAGôLEG π∏≤J .É¡æjõîJ hCG á«FÉHô¡µdG Iõ¡LC’G
RÉ¡÷G 𫨰ûJ AóH ô£N øe √òg á«FÉbƒdG áeÓ°ùdG
.ó°üb ¿hO ICÉéa »FÉHô¡µdG
øY Gkó«©H áeóîà°ùŸG ÒZ á«FÉHô¡µdG Iõ¡LC’G ßØMG .O
øjOÉà©ŸG ÒZ ¢UÉî°TCÓd íª°ùJ ’h ∫ÉØWC’G ∫hÉæàe
≈∏Y Ú©∏£ŸG ÒZ hCG »FÉHô¡µdG RÉ¡÷G ΩGóîà°SG ≈∏Y
Iõ¡LC’G .»FÉHô¡µdG RÉ¡÷G 𫨰ûàH äGOÉ°TQE’G √òg
Úeóîà°ùe ój ‘ ¿ƒµJ ÉeóæY Gkô£N πµ°ûJ á«FÉHô¡µdG
.ÚHQóe ÒZ
RÉ¡÷G ¢üëaG .á«FÉHô¡µdG Iõ¡LC’G áfÉ«°U »¨Ñæj .g
ácôM ¥ƒ©J »àdG hCG áÑ«©ŸG AGõLC’G ≈∏Y ±ô©à∏d
AGõLC’G øe √ƒ∏N øe ócCÉà∏dh ácôëàŸG AGõLC’G
IAÉØc ≈∏Y ôKDƒJ ób iôNCG ádÉM …CG øeh IQƒ°ùµŸG
,∞∏J …CG ≈∏Y Qƒã©dG ” GPEG .á«FÉHô¡µdG Iõ¡LC’G 𫨰ûJ
™≤J .ΩGóîà°S’G πÑb »FÉHô¡µdG RÉ¡÷G ìÓ°UEG »¨Ñæj
Iõ¡LC’G áfÉ«°U Aƒ°S áé«àf çOGƒ◊G øe Òãc
.á«FÉHô¡µdG
IOÉM ádÉM ‘ ™£≤dG äGhOCG ≈∏Y ®ÉØ◊G »¨Ñæj .h
Ö°SÉæe πµ°ûH É¡«∏Y ßaÉëŸG ™£≤dG äGhOCG .áØ«¶fh
á°VôY πbCG »g IOÉM á©WÉb äGôØ°ûH IOhõŸGh
.ºµëàdG ‘ π¡°SCGh ∫É£YCÓd
¬FGõLCGh ¬JÉ≤ë∏eh »FÉHô¡µdG RÉ¡÷G ΩGóîà°SG »¨Ñæj .R
±hôX òNCG ™e ,äGOÉ°TQE’G √ò¡d Ék≤ah ∂dP ¤EG Éeh
ÖÑ°ùàj ób .QÉÑàY’G ‘ √ò«ØæJ OGôŸG πª©dGh πª©dG
𫨰ûJ äÉ«∏ªY πLCG øe »FÉHô¡µdG RÉ¡÷G ΩGóîà°SG
çhóM ‘ IOƒ°ü≤ŸG 𫨰ûàdG äÉ«∏ªY øY áØ∏àfl
.ôWÉfl
áfÉ«°üdG .5
ᣰSGƒH »FÉHô¡µdG RÉ¡÷G ìÓ°UEGh áfÉ«°U »¨Ñæj .CG
Gòg .§≤a á≤HÉ£e QÉ«Z ™£b ΩGóîà°SÉH πgDƒe ¢üî°T
.»FÉHô¡µdG RÉ¡÷G áeÓ°S ≈∏Y ®ÉØ◊G øª°†«°S
Iõ¡LC’G áeÓ°S ¢Uƒ°üîH á«aÉ°VEG äGôjò–
á«FÉHô¡µdG
h ÖbÉãŸG áeÓ°S ¢Uƒ°üîH á«aÉ°VEG äGôjò–
á«eó°üdG ÖbÉãŸG

15
ARABIC
.á«eó°üdG ÖbÉãŸG ΩGóîà°SG óæY ¿PC’G äÉ«bGh …óJQG •
¿Gó≤a ‘ AÉ°Vƒ°†∏d ¢Vô©àdG ÖÑ°ùàj ¿CG øµÁ å«M
.™ª°ùdG
øµÁ .RÉ¡÷G ™e IOQƒŸG á«aÉ°VE’G ¢†HÉ≤ŸG Ωóîà°SG
•
.á«°üî°ûdG áHÉ°UE’G ‘ ÖÑ°ùàj ¿CG Iô£«°ùdG ¿Gó≤Ød
í£°SCG …P ¢†Ñ≤e ᣰSGƒH »FÉHô¡µdG RÉ¡÷G ∂°ùeG
•
¢ùeÓJ ób ,Ée á«∏ªY ò«ØæàH Ωƒ≤J Éeóæ©a ,ádhõ©e
RÉ¡÷G ∂∏°S hCG á«ØîŸG ∑Ó°SC’G áµÑ°T ™£≤dG IóMh
QÉ«J ∂∏°ùd ™£≤dG IóMh á°ùeÓe …ODƒJ óbh .¬°ùØf
"»◊G"QÉ«àdG ∂∏°ùd á«fó©ŸG AGõLC’G ájô©J ¤EG "»M"
áeó°üd π¨°ûŸG ¢Vô©J ‘ ∂dP ÖÑ°ùàj ób ºK øeh
.á«FÉHô¡c
ΩɵME’ iôNCG á«∏ªY á≤jôW …CG hCG äÉ£eÉ≤dG Ωóîà°SG
•
¿EG .Iô≤à°ùe á°üæe ≈∏Y πª©dG á©£b º«YóJh â«ÑãJ
∂ª°ùL ≈∏Y É¡©°Vh hCG ó«dG ᣰSGƒH πª©dG á©£b ∂°ùe
¿Gó≤a ¤EG …ODƒj óbh Iô≤à°ùe ÒZ πª©dG á©£b π©éj
.Iô£«°ùdG
¢üëaG ,∞≤°SC’G hCG äÉ«°VQC’G ,¿GQó÷G Ö≤K πÑb
•
.Ò°SGƒŸGh ∑Ó°SC’G π«°UƒJ ™°Vƒe
IöTÉÑe Ö≤ãdG ó©H ÜÉ≤ãŸG áª≤d ±ôW á°ùeÓe ÖæŒ
•
.áæNÉ°S ¿ƒµJ ó≤a
…hP ¢UÉî°TC’G ¬eóîà°ù«d ºª°üe ÒZ RÉ¡÷G Gòg
•
á«fóàŸG á«∏≤©dGh á«°ù◊Gh á«ægòdGh ájó°ù÷G äGQó≤dG
’EG (∫ÉØWC’G ∂dP ‘ ÉÃ) Úà∏«∏≤dG áaô©ŸGh IÈÿGh
á≤∏©àŸG äɪ«∏©àdG º¡FÉ£YEG hCG º¡«∏Y ±GöTE’G πX ‘
øY ∫hDƒ°ùŸG ¢üî°ûdG πÑpb øe RÉ¡÷G ΩGóîà°SÉH
º¡ãÑY ΩóY ¿Éª°†d ∫ÉØWC’G áÑbGôe Öéj .º¡àeÓ°S
.RÉ¡÷ÉH
.ΩGóîà°S’G øe ¢Vô¨dG Gòg äGOÉ°TQE’G π«dO ∞°üj
•
…CG AGOCG hCG ≥ë∏e hCG QGƒ°ù°ùcCG …CG ΩGóîà°SG ≈∏Y ÖJÎj
π«dO ‘ ¬H ≈°UƒŸG ±ÓîH RÉ¡÷G Gò¡H á«∏ªY
á«°üî°ûdG áHÉ°UE’G ô£N ¤EG …ODƒj ób Gòg äGó°TQE’G
.äɵ∏ટG ∞∏J hCG /h
RGõàg’G
á«æØdG äÉfÉ«ÑdG ‘ IQƒcòŸG áæ∏©ŸG äGRGõàg’G çÉ©ÑfG º«b
á«°SÉ«b QÉÑàNG á≤jô£d Ék≤ah É¡°SÉ«b ” ≥aGƒàdG äÉeƒ∏©eh
øµÁh EN 60745 QÉ«©ŸG ÖLƒÃ É¡«∏Y ¢Uƒ°üæe
᪫b ΩGóîà°SG øµÁh .ôNBG ™e Ée RÉ¡L áfQÉ≤Ÿ É¡eGóîà°SG
.¢Vô©à∏d ‹hCG º««≤J AGôLEG ‘ áæ∏©ŸG äGRGõàg’G çÉ©ÑfG
ΩGóîà°S’G AÉæKCG äGRGõàg’G çÉ©ÑfG ᪫b ∞∏àîJ ób !ôjò–
∞bƒàj å«M áæ∏©ŸG ᪫≤dG øY »FÉHô¡µdG RÉ¡é∏d »∏©ØdG
RGõàg’G iƒà°ùe RhÉéàj ób .RÉ¡÷G ΩGóîà°SG ¥ôW ≈∏Y ∂dP
.QƒcòŸG iƒà°ùŸG
áeÓ°ùdG äGAGôLEG ójóëàd RGõàgÓd ¢Vô©àdG º««≤J óæY
ájɪ◊ EC/2002/44 QÉ«©ŸG ÖLƒÃ áHƒ∏£ŸG
πµ°ûH á«FÉHô¡µdG Iõ¡LC’G ¿ƒeóîà°ùj øjòdG ¢UÉî°TC’G
º««≤J á«∏ªY ‘ »∏j Ée IÉYGôe Ωõ∏j ,º¡∏ªY ‘ º¶àæe
á≤jô£dGh ΩGóîà°SÓd á«∏©ØdG ±hô¶dG :RGõàgÓd ¢Vô©àdG
AGõLCG áaÉc òNCG ∂dP ‘ Éà ,É¡H RÉ¡÷G ΩGóîà°SG ºàj »àdG
É¡«a ºàj »àdG äÉbhC’G πãe ;QÉÑàY’G ‘ 𫨰ûàdG IQhO
,¬eGóîà°SG øY ∞bƒàdG óæY hCG RÉ¡÷G 𫨰ûJ ±É≤jEG
.𫨰ûàdG äÉbhCG ¤EG áaÉ°VE’ÉH
Iõ¡LC’G ≈∏Y äÉ≤°ü∏ŸG
:RÉ¡÷G ≈∏Y á«dÉàdG Qƒ°üdG óLƒJ
≈∏Y »¨Ñæj ,áHÉ°UE’G ô£N π«∏≤àd !ôjò–
.äGOÉ°TQE’G π«dO IAGôb Ωóîà°ùŸG
á«FÉHô¡µdG áeÓ°ùdG
áLÉM ’ ,∂dòd ;É k LhOõe k’õY ∫hõ©e RÉ¡÷G Gòg
≥aGƒJ øe ÉkªFGO ócCÉàdG »¨Ñæjh .»°VQCG ∂∏°S ¤EG
áMƒd ≈∏Y í°VƒŸG ó¡÷G ™e »FÉHô¡µdG QÉ«àdG Qó°üe
.򾲈dG

16
ARABIC
¬dGóÑà°SG Öéj ,»FÉHô¡µdG QÉ«àdG ∂∏°S ∞∏J ádÉM ‘ •
ófCG ∑ÓH áfÉ«°U õcôe hCG á©æ°üŸG ácöûdG πÑpb øe
.ôWÉîŸG Öæéàd óªà©e ôµjO
ÉjGõŸG
É¡«∏Y hCG á«dÓJ ÉjGõŸG ¢†©H ≈∏Y RÉ¡÷G Gòg πªà°ûj
:Ék©«ªL
IÒ¨àŸG áYöù∏d ìÉàØe 1
¥ÓZE’G QR 2
IÒ¨àŸG áYöùdG ‘ ºµëà∏d ìÉàØe 3
»Ø∏ÿG / »eÉeC’G √ÉŒÓd ≥dõæe 4
Ö≤ãdG ™°Vh QÉ«àNG ìÉàØe 5
¢SCGQ 6
≥ª©dG ó°üe 7
»ÑfÉL ¢†Ñ≤e 8
Ö«cÎdG
RÉ¡÷G 𫨰ûJ ±É≤jEG øe ócCÉJ ,Ö«cÎdG πÑb !ôjò–
.»FÉHô¡µdG QÉ«àdG Qó°üe øY ¬∏°üah
≥ª©dG ó°üeh »ÑfÉ÷G ¢†Ñ≤ŸG Ö«côJ
(CG πµ°T)
¥’õfG Ú◊ áYÉ°ùdG ÜQÉ≤Y √ÉŒG ¢ùµY ¢†Ñ≤ŸG QOCG•
ɪc RÉ¡é∏d »eÉeC’G Aõ÷G ≈∏Y (8) »ÑfÉ÷G ¢†Ñ≤ŸG
.í°Vƒe ƒg
.܃ZôŸG ™°VƒŸG ‘ ÖfÉ÷G ¢†Ñ≤ŸG QOCG
•
ƒg ɪѰùM Ö«cÎdG áëàa ‘ (7) ≥ª©dG ó°üe πNOG •
.ÚÑe
.√ÉfOCG ÚÑe ƒg ɪѰùM Ö≤ãdG ≥ªY §Ñ°VG
•
√ÉŒG ‘ ¢†Ñ≤ŸG ôjhóàH »ÑfÉ÷G ¢†Ñ≤ŸG ≥fRG •
.áYÉ°ùdG ÜQÉ≤Y
∂ØŸG áª≤d hCG Ö≤ãdG áª≤d Ö«côJ
(ê h Ü πµ°T)
¿GQhódG Oƒª©d ¿ÉeCG πØb ™e ìÉàØe ¿hóH ¢SCGQ
(Ü πµ°T)
ÜQÉ≤Y √ÉŒG ¢ùµY (9) ºµdG ôjhóàH ¢SCGôdG íàaG •
.áYÉ°ùdG
.¢SCGôdG ‘ (10) º≤∏dG OƒªY πNOG
•
.áYÉ°ùdG ÜQÉ≤Y √ÉŒG ‘ ºµdG ôjhóàH ¢SCGôdG ≥fRG •
(ê πµ°T) ìÉàØà ¢SCGQ
ÜQÉ≤Y √ÉŒG ¢ùµY (11) ºµdG ôjhóàH ¢SCGôdG íàaG •
.áYÉ°ùdG
.¢SCGôdG ‘ (10) º≤∏dG OƒªY πNOG
•
ÖfÉL ‘ (13) áëàa πc ‘ (12) ¢SCGôdG ìÉàØe πNOG •
ΩɵMEG ≈àM áYÉ°ùdG ÜQÉ≤Y √ÉŒG ‘ √QOGh ¢SCGôdG
.£HQ
(O πµ°T) ¬Ñ«côJ IOÉYEGh ¢SCGôdG ∂a
.á浇 áaÉ°ùe ≈°übC’ ¢SCGôdG íàaG •
√ôjhóàH ,¢SCGôdG ≈∏Y OƒLƒŸG ,¢SCGôdG ≥fR Qɪ°ùe ∂a •
.∂Øe ΩGóîà°SÉH áYÉ°ùdG ÜQÉ≤Y √ÉŒG ‘
ƒg ɪc ábô£Ã ¬bôWGh ¢SCGôdG ‘ ødCG ìÉàØe ≥fRG
•
.í°Vƒe
.ødCG ìÉàØe êôNCG
•
.áYÉ°ùdG ÜQÉ≤Y √ÉŒG ¢ùµY √ôjhóàH ¢SCGôdG êôNCG•
¬≤fRGh ¿GQhódG OƒªY ‘ ¬∏NOCG ,¢SCGôdG Ö«côJ IOÉYE’•
.¢SCGôdG ≥fR Qɪ°ùÃ
á«≤ÑàŸG ôWÉîŸG
»àdGh RÉ¡÷G ΩGóîà°SG óæY á«aÉ°VEG á«≤Ñàe ôWÉfl CÉ°ûæJ ób
CÉ°ûæJ óbh .á≤aôŸG áeÓ°ùdG äGôjò– ‘ á檰†e ¿ƒµJ ’ ób
Éeh ∫ƒ£ŸG ΩGóîà°S’G hCG ΩGóîà°S’G Aƒ°S øY ôWÉîŸG ∂∏J
.∂dP ¤EG

17
ARABIC
ΩGóîà°SGh á∏°üdG äGP áeÓ°ùdG íFGƒd ≥«Ñ£J ™e ≈àM
.á«≤ÑàŸG ôWÉîŸG ¢†©H ÖæŒ øµÁ ’ ,áeÓ°ùdG äGhOCG
:»∏j Ée á«≤ÑàŸG ôWÉîŸG √òg πª°ûJ
AGõLCG ájCG á°ùeÓe øY áŒÉædG äÉHÉ°UE’G
•
.ácôëàe/IQGhO
äGôØ°T hCG AGõLCG ájCG Ò«¨J óæY çó– »àdG äÉHÉ°UE’G
•
.äÉ≤ë∏e hCG
.RÉ¡é∏d ∫ƒ£ŸG ΩGóîà°S’G øY áŒÉædG äÉHÉ°UE’G
•
øe ócCÉJ ,á∏jƒW äGÎØd RÉ¡L …CG ΩGóîà°SG óæY •
.᪶àæe á∏°UÉa äGÎØd ∞bƒàdG
.™ª°ùdG ∞©°V
•
Å°TÉædG QÉѨdG ¥É°ûæà°SG øY áŒÉædG á«ë°üdG ôWÉîŸG •
ΩGóîà°S’G :∫ÉãŸG π«Ñ°S ≈∏Y) RÉ¡÷G ΩGóîà°SG óæY
•ƒ∏ÑdG Ö°ûN ¢Uƒ°üÿG ¬Lh ≈∏Yh ÜÉ°ûNC’G ™e
.(áaÉãµdG §°Sƒàe »Ø«∏dG Ö°ûÿGh ¿GõdG Ö°ûNh
ΩGóîà°S’G
’ .¬d ºª°üŸG πª◊G Ö°ùM πª©j RÉ¡÷G ∑ôJG !ôjò–
.óFGR πªëH ¬≤gôJ
¢üëaG ,∞≤°SC’G hCG äÉ«°VQC’G ,¿GQó÷G Ö≤K πÑb !ôjò–
.Ò°SGƒŸGh ∑Ó°SC’G π«°UƒJ ™°Vƒe
¿GQhódG √ÉŒG QÉ«àNG
‘) »eÉeC’G ¿GQhódG Ωóîà°SG ,»ZGÈdG §HQ ΩɵMEGh Ö≤ã∏d
Ö≤K áª≤d ∂a hCG »ZGÈdG á∏ë∏◊ .(áYÉ°ùdG ÜQÉ≤Y √ÉŒG
ÜQÉ≤Y √ÉŒG ¢ùµY) »°ùµ©dG ¿GQhódG Ωóîà°SG ,áÑ°üd
.(áYÉ°ùdG
≥dõæŸG ìÉàØŸG ™aOG ,»eÉeC’G ¿GQhódG QÉ«àN’
•
.QÉ°ù«dG á¡L (4) »Ø∏ÿG »eÉeC’G
≥dõæŸG ìÉàØŸG ™aOG ,»°ùµ©dG ¿GQhódG QÉ«àN’
•
.Úª«dG á¡L »Ø∏ÿG / »eÉeC’G
¿GQhO AÉæKCG ¿GQhódG √ÉŒG Ò«¨J ÉkJÉàH ô¶ëj !ôjò–
.∑ôëŸG
Ö≤ãdG ™°Vh QÉ«àNG
™°Vh QÉ«àNG ìÉàØe §Ñ°VG ,ÊÉÑŸG ¿GQóL ‘ Ö≤ã∏d •
. ™°VƒŸG ≈∏Y (5) Ö≤ãdG
ìÉàØe §Ñ°VG ,»ZGÈdG ™aOh iôNCG OGƒe ‘ Ö≤ã∏d •
. ™°VƒŸG ≈∏Y (5) Ö≤ãdG ™°Vh QÉ«àNG
(CG πµ°T) Ö≤ãdG ≥ªY §Ñ°V
¢ùµY ¢†Ñ≤ŸG ôjhóàH (8) »ÑfÉ÷G ¢†Ñ≤ŸG πë∏M •
.áYÉ°ùdG ÜQÉ≤Y √ÉŒG
≈°übCG .܃ZôŸG ™°VƒŸG ≈∏Y (7) ≥ª©dG ó°üe §Ñ°VG •
Ö≤ãdG áª≤d ¢SCGQ ÚH áaÉ°ùŸG …hÉ°ùj Ö≤ã∏d ≥ªY
.≥ª©dG ó°üŸ »eÉeC’G ±ô£dGh
√ÉŒG ‘ ¢†Ñ≤ŸG ôjhóàH »ÑfÉ÷G ¢†Ñ≤ŸG ≥fRG
•
.áYÉ°ùdG ÜQÉ≤Y
±É≤jE’Gh 𫨰ûàdG
(1) IÒ¨àŸG áYöùdG ìÉàØe ≈∏Y §¨°VG ,RÉ¡÷G 𫨰ûàd •
GPEG .ìÉàØŸG ≈∏Y §¨°†dG áaÉ°ùe ≈∏Y RÉ¡÷G áYöS ºà©J
,(3) IÒ¨àŸG áYöù∏d ¢†Ñ≤e ≈∏Y …ƒàëj RÉ¡÷G ¿Éc
,áeÉY áØ°üH .܃∏£ŸG áYöùdG ióe ≈∏Y ¬£Ñ°VG
ô£≤dG äGP Ö≤ãdG º≤d ™e á°†Øîæe äÉYöS Ωóîà°SG
QÉ£bC’G äGP Ö≤ãdG º≤d ™e á«dÉY äÉYöSh ÒѵdG
.ô¨°UC’G
ìÉàØe QôMh (2) ≥∏¨dG QR ≈∏Y §¨°VG ,ôªà°ùŸG 𫨰ûà∏d
•
áYöùdG ‘ ’EG QÉ«ÿG Gòg ôaƒàj ’ .IÒ¨àŸG áYöùdG
¢†Ñ≤à Ék≤Ñ°ùe áWƒÑ°†e áYöS …CG ‘ hCG á∏eɵdG
‘ QÉ«ÿG Gòg πª©j ’ .(3) IÒ¨àŸG áYöùdG ‘ ºµëàdG
.»°ùµ©dG ¿GQhódG
.IÒ¨àŸG áYöùdG ìÉàØe ≈∏Y §¨°VG ,RÉ¡÷G ±É≤jE’
•
≈∏Y §¨°VG ,ôªà°ùŸG 𫨰ûàdG AÉæKCG RÉ¡÷G ±É≤jE’
.√QôMh iôNCG Iôe IÒ¨àŸG áYöùdG ìÉàØe

18
ARABIC
äGQGƒ°ù°ùcC’G
.áeóîà°ùŸG äGQGƒ°ù°ùcC’G ≈∏Y RÉ¡÷G AGOCG óªà©j
á≤jô£H ᪪°üe É¡fGÒHh ôµjO ófCG ∑ÓH äGQGƒ°ù°ùcCG
AGOCG õjõ©àd ᪪°üe »gh á«dÉY IOƒL ÒjÉ©Ã Ék«°Sóæg
π°†aCG ≈∏Y π°üëà°S äGQGƒ°ù°ùcC’G √òg ΩGóîà°SÉH .RÉ¡÷G
.RÉ¡÷G øe AGOCG
áfÉ«°üdG
á∏jƒW IÎØd ¬∏«¨°ûJ πLCG øe ºª°üe ôµjO ófCG ∑ÓH RÉ¡L
𫨰ûàdG á«∏ªY óªà©J .áfÉ«°üdG øe ≈fOCG óëH øeõdG øe
RÉ¡÷ÉH áÑ°SÉæŸG ájÉæ©dG ≈∏Y Iôªà°ùŸG á«°VôŸG
.¬d º¶àæŸG ∞«¶æàdGh
¬∏°üaGh RÉ¡÷G 𫨰ûJ ∞bhCG áfÉ«°U …CG AGôLEG πÑb !ôjò–
.¢ùHÉ≤dG øe
…QhO πµ°ûH RÉ¡÷G ‘ ájƒ¡àdG äÉëàa ∞¶f
•
.áaÉL ¢Tɪb á©£b hCG áªYÉf IÉ°Tôa ΩGóîà°SÉH
á©£b ΩGóîà°SÉH º¶àæe πµ°ûH ∑ôëŸG â«Ñe ∞¶f
•
hCG ádÉcCG ∞«¶æJ IOÉe …CG Ωóîà°ùJ ’ .áÑWQ ¢Tɪb
.Öjòe ≈∏Y …ƒà–
»FÉHô¡µdG QÉ«àdG ¢ùHÉb ∫GóÑà°SG
:ójóL »FÉHô¡c QÉ«J ¢ùHÉb Ö«côJ áLÉ◊G âYóà°SG GPEG
.áæeBG á≤jô£H Ëó≤dG ¢ùHÉ≤dG ∂a
•
‘ »◊G QÉ«àdG ±ô£H »æÑdG π«°UƒàdG ∂∏°S π°U •
.ójó÷G ¢ùHÉ≤dG
.ójÉëŸG QÉ«àdG ±ô£H ¥QRC’G π«°UƒàdG ∂∏°S π°U
•
∂∏°ùdG π°U ,(¢VQDƒe) ¤hC’G áÄØdG øe èàæŸG ¿Éc GPEG•
.»°VQC’G ±ô£dÉH ôØ°UC’G / ö†NC’G
k’õY ádhõ©ŸG á«fÉãdG áÄØdG øe èàæŸG ¿Éc GPEG !ôjò–
’ ,(äÓHɵdG áYƒª› ‘ §≤a ¿ÉæKG ¿Éµ∏°S) É k LhOõe
.»°VQC’G ±ô£dÉH π°Uƒj
.IOƒ÷G á«dÉ©dG ¢ùHÉ≤ŸG ™e IOQGƒdG Ö«cÎdG äGOÉ°TQEG ™ÑJG
ô¡°üŸG ≤ŸG ¢ùØf ∫óÑà°ùŸG ô¡°üª∏d ¿ƒµj ¿CG Öéj
.èàæŸG ™e OQƒŸG »∏°UC’G
á«æØdG äÉfÉ«ÑdG
KR704 KR703
1´ƒædG 2´ƒædG
220-240 220-240 VAC πNódG á«£∏a
710 710 äGh IQó≤dG πNO
0-3,100 0-3,100
-1á≤«bO πªM ¿hO áYöùdG
Ö≤ã∏d IQób ≈°übCG
13/16 13/16 · áfÉ°SôÿG / ójó◊G
32 32 · Ö°ûÿG
2.11 2.11 ºéc ¿RƒdG
KR803 KR753
1´ƒædG 2´ƒædG
220-240 220-240 VAC πNódG á«£∏a
800 750 äGh IQó≤dG πNO
0-3,100 0-3,100
-1á≤«bO πªM ¿hO áYöùdG
Ö≤ã∏d IQób ≈°übCG
13/16 13/16 · áfÉ°SôÿG / ójó◊G
32 32 ·Ö°ûÿG
2.11 2.11 ºéc ¿RƒdG

19
ARABIC
¿Éª°†dG
OGƒŸG ‘ Ö«Y ÖÑ°ùH ôµjO ófBG ∑ÓH èàæe ‘ π∏N ô¡X GPEG
¿EÉa ,AGöûdG ïjQÉJ øe kGô¡°T 12 ¿ƒ°†Z ‘ ,™«æ°üàdG hCG
∫GóÑà°SG hCG áÑ«©ŸG AGõLC’G ∫GóÑà°SG øª°†J ôµjO ófBG ∑ÓH
:GPEG ’EG ,𫪩∏d áMGôdG øe Qób ≈°übCG Òaƒàd äÉéàæŸG √òg
.∫ɪgE’G hCG ΩGóîà°S’G IAÉ°SE’ èàæŸG ¢Vô©J
•
OGƒe hCG ΩÉ°ùLCG ÖÑ°ùH èàæŸÉH ᪫°ùL QGöVCG â≤◊ •
.çOGƒM hCG áÑjôZ
hCG øjóªà©ŸG áfÉ«°üdG AÓch iƒ°S ôNBG ¢üî°T ∫hÉM
•
ìÓ°UEG ôµjO ófBG ∑ÓÑd Ú©HÉàdG áfÉ«°üdG »∏eÉY
.èàæŸG
AGöûdG IQƒJÉa Ëó≤J Öéj ,¿Éª°†dG äÉeóN ≈∏Y ∫ƒ°üë∏d
ÜôbCG ™bƒe áaô©e ∂æµÁ .óªà©ŸG áfÉ«°üdG π«ch hCG ™FÉÑ∏d
ófBG ∑ÓH ÖàµÃ ∫É°üJ’G ≥jôW øY óªà©e áfÉ«°U π«ch
øe k’óHh .π«dódG Gòg ‘ ÚÑŸG ¿Gƒæ©dG ‘ »∏ëŸG ôµjO
ófBG ∑ÓH iód øjóªà©ŸG áfÉ«°üdG AÓcƒH áªFÉb ôaƒàJ ,∂dP
äÉ¡Lh ™«ÑdG ó©H Ée áeóÿ á∏eɵdG π«°UÉØàdGh ôµjO
:âfÎfE’G ≈∏Y Éæ©bƒe ≈∏Y ∫É°üJ’G
.www.2helpU.com
π«é°ùàd www.blackanddecker.ae IQÉjõH π°†ØJ
äÉéàæŸG ≈∏Y ´ÓW’Gh ôµjO ófBG ∑ÓH øe ójó÷G ∂éàæe
äÉeƒ∏©ŸG øe ójõŸG ôaƒàJ .á°UÉÿG ¢Vhô©dGh Iójó÷G
≈∏Y ÉæJÉéàæe áYƒª›h ôµjO ófBG ∑ÓH ácöT ∫ƒM
.www.blackanddecker.ae
áÄ«ÑdG ájɪM
Gòg øe ¢ü∏îàdG ΩóY Ωõ∏j .π°üØæŸG ™ª÷G
.ájOÉ©dG á«dõæŸG áeɪ≤dG ™e èàæŸG
ôµjO ófBG ∑ÓH èàæe ∫GóÑà°SG ΩÉjC’G øe Ωƒj ‘ Ωõd GPEG
™e ¬æe ¢ü∏îàJ Óa ,¬eóîà°ùJ ó©J ⁄ GPEG hCG ,∂H ¢UÉÿG
èàæŸG Gòg áMÉJEG øe ócCÉJ πH ,iôNC’G á«dõæŸG áeɪ≤dG
.π°üØæŸG ™ªé∏d
ôjhóJ IOÉYE’ ≥aôe ôµjO ófBG ∑ÓH ácöT ôaƒJ
•
ájÉ¡f ¤EG É¡dƒ°Uh Oôéà ôµjO ófBG ∑ÓH äÉéàæe
√òg Ëó≤J ºàjh .πª©∏d É¡à«MÓ°U ΩóYh ÉgôªY
≈Lôj ,áeóÿG √òg øe IOÉØà°SÓd .ÉkfÉ› áeóÿG
±ƒ°S …òdGh óªà©e áfÉ«°U π«ch …CG ¤EG èàæŸG IOÉYEG
.ÉæY áHÉ«f äÉéàæŸG ™ªL √QhóH ¤ƒàj
óªà©e áfÉ«°U π«ch ÜôbCG ™bƒe ≈∏Y ±ô©àdG ∂æµÁ
•
»∏ëŸG ôµjO ófBG ∑ÓH Öàµe ≈∏Y ∫É°üJ’G ∫ÓN øe
,∂dP øe k’óHh .π«dódG Gòg ‘ í°VƒŸG ¿Gƒæ©dG ‘
Ú©HÉàdG øjóªà©ŸG áfÉ«°üdG AÓcƒH áªFÉb óLƒJ
Ée äÉeóÿ á∏eɵdG π«°UÉØàdGh ôµjO ófBG ∑ÓH ácöûd
âfÎfE’G ≈∏Y ÉæH á°UÉÿG ∫É°üJ’G πFÉ°Shh ™«ÑdG ó©H
.www.2helpU.com :ÊhεdE’G ™bƒŸG ≈∏Y

20
FRENCH
5
7
1
2
3
4
8
6