
6
ENGLISH (Original instructions)
The charger is intended for
indoor use only.
Labels on appliance
The following symbols appear on this appliance along with the
date code.
Read all of this manual carefully before
using the appliance
S010QK1400040
S006BAK1500040
BHHV315B EBHHV320B Only use
with charger S010QK1400040 /
S006BAK1500040
S010QK2300040
S010BHK2300040
BHHV520BF/BFP Only use with charger
S010QK2300040 / S010BHK2300040
Features
This tool includes some or all of the following features.
1. On/off power switch
2. Power indicator
3. Dust chamber
4. Vacuum tube
5. Extendable crevice tool
6. Pet head attachment (Only for BHHV520BFP07)
7. Charging station
8. Wall charger
Use
Fitting the charging station (Fig. A)
uFit the charging station (7) to a suitable bench area
(preferably near a power outlet) using the screws
provided.
uThe unit can then be stored, when not in use, or during the
charging procedure.
Charging port (Fig. B, C)
uPlace the charger (8) into the charging port (8a) on the
handle of the unit as shown in gure B.
uPlace the charging plug into a power outlet and switch on
as shown in gure C.
Using the pull out crevice tool (Fig. D)
uExtend the crevice tool (5) as shown in gure D, until it
clicks in place.
Attaching the pet head (Fig. E, F)
Warning! The unit needs to be switched off when the pet
head is attached or detached.
Warning! Do not use directly on pets.
uSlide the vacuum tube opening into the opening of the
motorized pet head (6), ensuring that the connectors (6c)
engage with the recesses (6d). An audible click will be
heard.
Removing the pet head
uPull the motorized pet head release tabs (6a) outward to
release them from the recesses (6b).
uPull the main unit from the pet head.
Warning! The unit needs to be switched off when the pet
head is attached or detached.
Removing and clearing the beater bars (Fig. G)
uTo remove the beater bar from the pet head
Depress the release button as shown in gure G.
uThe beater bar can now be removed.
uThe end pieces are also removable allowing you to clear
the brushes from any hair or other debris that may have
accumulated.
uWash the beater bar with warm soapy water as shown in
gure G.
Switching on and off (Fig. H)
uPush the On/off power switch (1) to turn on the unit.
uPush the On/off power (1) switch once again to engage
the power boost.
uPush the On/off power (1) switch to turn the unit off.
Power indicator (Fig. I)
uThe power indicator (2) indicates the battery life available
(2a) and when the lter needs cleaning (2b).
Cleaning the lters (Fig. J, K, L)
uPress the dust chamber release button (9) to release the
dust chamber access door (10) as shown in gure J.
uEmpty the dust bowl (3) by lightly shaking over a suitable
container as shown in gure K.
uLift the pre filter (11) out of the dust chamber (3) using the
tab provided as shown in gure K.
uLift the filter (12) out of the dust chamber (3) using the tab
provided as shown in gure L.
uWash the lters with warm soapy water as shown in gure
M.
uAllow the lters to dry naturally, using heat may cause the
lters to distort.
uRet the lter (12) into the pre-lter (11) and then reinsert
into the dust chamber (3). Never place the lters into
the dust chamber backwards.
uClose the dust chamber access door (10).
Warning! Before performing any maintenance or cleaning on
the appliance, unplug the appliance.