Black Box IC408A User manual

Place the Local Extender where desired and connect the
CAT5e patch cable from the Link port (RJ-45) to a network
switch or wall network port connected to a switch.
Maximum 330 ft. (100 m)
between network devices
Place the Remote Extender where desired. Connect the
CAT5e patch cable from the Link port (RJ-45) to a network
switch or wall network port connected to a switch and
connect the Remote Extender to a power source.
Maximum 330 ft. (100 m)
between network devices
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax [phone]
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: [e-mail]
Customer
Support
Information
February 2010
MT1000A-85-R4
BL A C K B OX®
4-Port USB Extender over LAN Quick Start Guide
IC408A
1
1
3
Extend all USB 2.0 devices to hosts across a Gigabit Ethernet Local Area Network (LAN)
using existing cabling.
Network Connect
Connect the Local Extender to the computer using the
included USB cable.
Computer
Attach the USB device(s) to the Remote Extender.
2
4

BL A C K BOX®
FREE, live, 24/7 Tech Support is just 30 seconds away.
724-746-5500 | blackbox.com
© Copyright 2013. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box®and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any third-party
trademarks appearing in this manual are acknowledged to be the property of their respective owners.
IC408A Quick Start Guide, version 1
Place the extenders where desired and connect the CAT5e
extension link cabling to the Link ports (RJ-45) on the Local
and Remote Extenders.
Maximum 330 ft. (100 m)
between devices
Connect the Remote Extender to the AC adapter and a
power source.
1
3
Direct Connect
Connect the Local Extender to the computer using the
included USB cable.
Computer
Attach the USB device(s) to the Remote Extender.
2
4